From: Patrick Bruenn p.bruenn@beckhoff.com
Enable esdhc1/2 device nodes for cx9020 and build with CONFIG_DM_MMC=y
Signed-off-by: Patrick Bruenn p.bruenn@beckhoff.com
---
arch/arm/dts/imx53-cx9020.dts | 52 +++++++++++++++++++++++++++++++------------ configs/mx53cx9020_defconfig | 1 + 2 files changed, 39 insertions(+), 14 deletions(-)
diff --git a/arch/arm/dts/imx53-cx9020.dts b/arch/arm/dts/imx53-cx9020.dts index c2e7d86c1b8..36ceae36aa9 100644 --- a/arch/arm/dts/imx53-cx9020.dts +++ b/arch/arm/dts/imx53-cx9020.dts @@ -99,20 +99,6 @@ MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 - MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 - MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 - MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 - MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 - MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 - - MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 - MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 - MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 - MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 - MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 - MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 - MX53_PAD_FEC_MDC__FEC_MDC 0x4 MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 @@ -162,6 +148,28 @@ >; };
+ pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + >; + }; + + pinctrl_esdhc2: esdhc2grp { + fsl,pins = < + MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 + MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 + MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 + MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 + MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 + MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX53_PAD_EIM_D26__UART2_RXD_MUX 0x1e4 @@ -181,6 +189,22 @@ status = "okay"; };
+&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + &fec { pinctrl-names = "default"; phy-mode = "rmii"; diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig index 3cff52031a0..ddd65e8ee15 100644 --- a/configs/mx53cx9020_defconfig +++ b/configs/mx53cx9020_defconfig @@ -19,6 +19,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_DM_MMC=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="imx53-cx9020" CONFIG_ENV_IS_IN_MMC=y