This board has not been converted to CONFIG_DM_BLK by the deadline. Remove it.
Signed-off-by: Simon Glass sjg@chromium.org ---
arch/arm/mach-at91/Kconfig | 1 - board/bluewater/snapper9260/Kconfig | 12 -- board/bluewater/snapper9260/MAINTAINERS | 7 - board/bluewater/snapper9260/Makefile | 9 -- board/bluewater/snapper9260/snapper9260.c | 151 ---------------------- configs/snapper9260_defconfig | 34 ----- configs/snapper9g20_defconfig | 33 ----- include/configs/snapper9260.h | 123 ------------------ 8 files changed, 370 deletions(-) delete mode 100644 board/bluewater/snapper9260/Kconfig delete mode 100644 board/bluewater/snapper9260/MAINTAINERS delete mode 100644 board/bluewater/snapper9260/Makefile delete mode 100644 board/bluewater/snapper9260/snapper9260.c delete mode 100644 configs/snapper9260_defconfig delete mode 100644 configs/snapper9g20_defconfig delete mode 100644 include/configs/snapper9260.h
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 0fe93263ba8..a879e79af2d 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -278,7 +278,6 @@ source "board/atmel/sama5d3_xplained/Kconfig" source "board/atmel/sama5d3xek/Kconfig" source "board/atmel/sama5d4_xplained/Kconfig" source "board/atmel/sama5d4ek/Kconfig" -source "board/bluewater/snapper9260/Kconfig" source "board/calao/usb_a9263/Kconfig" source "board/egnite/ethernut5/Kconfig" source "board/esd/meesc/Kconfig" diff --git a/board/bluewater/snapper9260/Kconfig b/board/bluewater/snapper9260/Kconfig deleted file mode 100644 index b8e9cbc5855..00000000000 --- a/board/bluewater/snapper9260/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_SNAPPER9260 - -config SYS_BOARD - default "snapper9260" - -config SYS_VENDOR - default "bluewater" - -config SYS_CONFIG_NAME - default "snapper9260" - -endif diff --git a/board/bluewater/snapper9260/MAINTAINERS b/board/bluewater/snapper9260/MAINTAINERS deleted file mode 100644 index 1f8f4d6988f..00000000000 --- a/board/bluewater/snapper9260/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -SNAPPER9260 BOARD -M: Simon Glass sjg@chromium.org -S: Maintained -F: board/bluewater/snapper9260/ -F: include/configs/snapper9260.h -F: configs/snapper9260_defconfig -F: configs/snapper9g20_defconfig diff --git a/board/bluewater/snapper9260/Makefile b/board/bluewater/snapper9260/Makefile deleted file mode 100644 index 842abf4eeeb..00000000000 --- a/board/bluewater/snapper9260/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2003-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2011 Bluewater Systems -# Ryan Mallon ryan@bluewatersys.com - -obj-y += snapper9260.o diff --git a/board/bluewater/snapper9260/snapper9260.c b/board/bluewater/snapper9260/snapper9260.c deleted file mode 100644 index d2a1b97d7b1..00000000000 --- a/board/bluewater/snapper9260/snapper9260.c +++ /dev/null @@ -1,151 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Bluewater Systems Snapper 9260/9G20 modules - * - * (C) Copyright 2011 Bluewater Systems - * Author: Andre Renaud andre@bluewatersys.com - * Author: Ryan Mallon ryan@bluewatersys.com - */ - -#include <common.h> -#include <dm.h> -#include <asm/io.h> -#include <asm/gpio.h> -#include <asm/mach-types.h> -#include <asm/arch/at91sam9260_matrix.h> -#include <asm/arch/at91sam9_smc.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/clk.h> -#include <asm/arch/gpio.h> -#include <asm/arch/atmel_serial.h> -#include <net.h> -#include <netdev.h> -#include <i2c.h> -#include <pca953x.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* IO Expander pins */ -#define IO_EXP_ETH_RESET (0 << 1) -#define IO_EXP_ETH_POWER (1 << 1) - -static void macb_hw_init(void) -{ - struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - - at91_periph_clk_enable(ATMEL_ID_EMAC0); - - /* Disable pull-ups to prevent PHY going into test mode */ - writel(pin_to_mask(AT91_PIN_PA14) | - pin_to_mask(AT91_PIN_PA15) | - pin_to_mask(AT91_PIN_PA18), - &pioa->pudr); - - /* Power down ethernet */ - pca953x_set_dir(0x28, IO_EXP_ETH_POWER, PCA953X_DIR_OUT); - pca953x_set_val(0x28, IO_EXP_ETH_POWER, 1); - - /* Hold ethernet in reset */ - pca953x_set_dir(0x28, IO_EXP_ETH_RESET, PCA953X_DIR_OUT); - pca953x_set_val(0x28, IO_EXP_ETH_RESET, 0); - - /* Enable ethernet power */ - pca953x_set_val(0x28, IO_EXP_ETH_POWER, 0); - - at91_phy_reset(); - - /* Bring the ethernet out of reset */ - pca953x_set_val(0x28, IO_EXP_ETH_RESET, 1); - - /* The phy internal reset take 21ms */ - udelay(21 * 1000); - - /* Re-enable pull-up */ - writel(pin_to_mask(AT91_PIN_PA14) | - pin_to_mask(AT91_PIN_PA15) | - pin_to_mask(AT91_PIN_PA18), - &pioa->puer); - - at91_macb_hw_init(); -} - -static void nand_hw_init(void) -{ - struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; - struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; - unsigned long csa; - - /* Enable CS3 as NAND/SmartMedia */ - csa = readl(&matrix->ebicsa); - csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA; - writel(csa, &matrix->ebicsa); - - /* Configure SMC CS3 for NAND/SmartMedia */ - writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) | - AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0), - &smc->cs[3].setup); - writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(4) | - AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(4), - &smc->cs[3].pulse); - writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7), - &smc->cs[3].cycle); - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | - AT91_SMC_MODE_EXNW_DISABLE | - AT91_SMC_MODE_DBW_8 | - AT91_SMC_MODE_TDF_CYCLE(3), - &smc->cs[3].mode); - - /* Configure RDY/BSY */ - gpio_request(CONFIG_SYS_NAND_READY_PIN, "nand_rdy"); - gpio_direction_input(CONFIG_SYS_NAND_READY_PIN); - - /* Enable NandFlash */ - gpio_request(CONFIG_SYS_NAND_ENABLE_PIN, "nand_ce"); - gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); -} - -int board_init(void) -{ - at91_periph_clk_enable(ATMEL_ID_PIOA); - at91_periph_clk_enable(ATMEL_ID_PIOB); - at91_periph_clk_enable(ATMEL_ID_PIOC); - - /* The mach-type is the same for both Snapper 9260 and 9G20 */ - gd->bd->bi_arch_number = MACH_TYPE_SNAPPER_9260; - - /* Address of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - /* Initialise peripherals */ - at91_seriald_hw_init(); - i2c_set_bus_num(0); - nand_hw_init(); - macb_hw_init(); - - return 0; -} - -int board_eth_init(bd_t *bis) -{ - return macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x1f); -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE); - return 0; -} - -void reset_phy(void) -{ -} - -static struct atmel_serial_platdata at91sam9260_serial_plat = { - .base_addr = ATMEL_BASE_DBGU, -}; - -U_BOOT_DEVICE(at91sam9260_serial) = { - .name = "serial_atmel", - .platdata = &at91sam9260_serial_plat, -}; diff --git a/configs/snapper9260_defconfig b/configs/snapper9260_defconfig deleted file mode 100644 index 7ce29bfb904..00000000000 --- a/configs/snapper9260_defconfig +++ /dev/null @@ -1,34 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_SYS_TEXT_BASE=0x21f00000 -CONFIG_TARGET_SNAPPER9260=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260" -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 ip=any" -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="Snapper> " -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -# CONFIG_CMD_LOADS is not set -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SOURCE is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_FAT=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_CMD_PCA953X=y -# CONFIG_MMC is not set -CONFIG_NAND=y -CONFIG_NAND_ATMEL=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y diff --git a/configs/snapper9g20_defconfig b/configs/snapper9g20_defconfig deleted file mode 100644 index 2773c6b41b1..00000000000 --- a/configs/snapper9g20_defconfig +++ /dev/null @@ -1,33 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_SYS_TEXT_BASE=0x21f00000 -CONFIG_TARGET_SNAPPER9260=y -CONFIG_NR_DRAM_BANKS=1 -CONFIG_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20" -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 ip=any" -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -# CONFIG_CMD_LOADS is not set -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SOURCE is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_FAT=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_CMD_PCA953X=y -# CONFIG_MMC is not set -CONFIG_NAND=y -CONFIG_NAND_ATMEL=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h deleted file mode 100644 index f212d154e9c..00000000000 --- a/include/configs/snapper9260.h +++ /dev/null @@ -1,123 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Bluewater Systems Snapper 9260 and 9G20 modules - * - * (C) Copyright 2011 Bluewater Systems - * Author: Andre Renaud andre@bluewatersys.com - * Author: Ryan Mallon ryan@bluewatersys.com - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* SoC type is defined in boards.cfg */ -#include <asm/hardware.h> -#include <linux/sizes.h> - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 - -/* CPU */ -#define CONFIG_ARCH_CPU_INIT - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* SDRAM */ -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 -#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) /* 64MB */ -#define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM1 + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) - -/* Mem test settings */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + (1024 * 1024)) - -/* NAND Flash */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 -#define CONFIG_SYS_NAND_DBW_8 -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* AD21 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* AD22 */ -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 - -/* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R -#define CONFIG_AT91_WANTS_COMMON_PHY -#define CONFIG_TFTP_PORT -#define CONFIG_TFTP_TSIZE - -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 - -/* GPIOs and IO expander */ -#define CONFIG_ATMEL_LEGACY -#define CONFIG_AT91_GPIO -#define CONFIG_AT91_GPIO_PULLUP 1 -#define CONFIG_PCA953X -#define CONFIG_SYS_I2C_PCA953X_ADDR 0x28 -#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x28, 16} } - -/* UARTs/Serial console */ -#define CONFIG_ATMEL_USART -#ifndef CONFIG_DM_SERIAL -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS -#endif - -/* I2C - Bit-bashed */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED 100000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F -#define CONFIG_SOFT_I2C_READ_REPEATED_START -#define I2C_INIT do { \ - at91_set_gpio_output(AT91_PIN_PA23, 1); \ - at91_set_gpio_output(AT91_PIN_PA24, 1); \ - at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 1); \ - at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 1); \ - } while (0) -#define I2C_SOFT_DECLARATIONS -#define I2C_ACTIVE -#define I2C_TRISTATE at91_set_gpio_input(AT91_PIN_PA23, 1); -#define I2C_READ at91_get_gpio_value(AT91_PIN_PA23); -#define I2C_SDA(bit) do { \ - if (bit) { \ - at91_set_gpio_input(AT91_PIN_PA23, 1); \ - } else { \ - at91_set_gpio_output(AT91_PIN_PA23, 1); \ - at91_set_gpio_value(AT91_PIN_PA23, bit); \ - } \ - } while (0) -#define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTA, 24, bit) -#define I2C_DELAY udelay(2) - -/* Boot options */ -#define CONFIG_SYS_LOAD_ADDR 0x23000000 - -#define CONFIG_BOOTP_BOOTFILESIZE - -/* Environment settings */ -#define CONFIG_ENV_OFFSET (512 << 10) -#define CONFIG_ENV_SIZE (256 << 10) -#define CONFIG_ENV_OVERWRITE - -/* Console settings */ - -/* U-Boot memory settings */ -#define CONFIG_SYS_MALLOC_LEN (1 << 20) - -#endif /* __CONFIG_H */