Add board identifiers for STMicroelectronics STM32MP13x boards: - DISCO board: MB1635
Signed-off-by: Patrick Delaunay patrick.delaunay@foss.st.com ---
board/st/common/Kconfig | 2 +- board/st/common/cmd_stboard.c | 7 ++++--- 2 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/board/st/common/Kconfig b/board/st/common/Kconfig index 2f57118bb265..aba3590866e0 100644 --- a/board/st/common/Kconfig +++ b/board/st/common/Kconfig @@ -1,7 +1,7 @@ config CMD_STBOARD bool "stboard - command for OTP board information" depends on ARCH_STM32MP - default y if TARGET_ST_STM32MP15x + default y if TARGET_ST_STM32MP15x || TARGET_ST_STM32MP13x help This compile the stboard command to read and write the board in the OTP. diff --git a/board/st/common/cmd_stboard.c b/board/st/common/cmd_stboard.c index 213fb5d30208..853ab78bbf16 100644 --- a/board/st/common/cmd_stboard.c +++ b/board/st/common/cmd_stboard.c @@ -2,8 +2,8 @@ /* * Copyright (C) 2019, STMicroelectronics - All Rights Reserved * - * the st command stboard supports the STMicroelectronics board identification - * saved in OTP 59. + * the command stboard supports the STMicroelectronics board identification + * saved in OTP_BOARD. * * The ST product codification have several element * - "Commercial Product Name" (CPN): type of product board (DKX, EVX) @@ -18,7 +18,7 @@ * - Finished Good = EVA32MP157A1$AU1 * * Both information are written on board and these information are also saved - * in OTP59, with: + * in OTP_BOARD (59 for STM32MP15x or 60 for STM32MP13x), with: * bit [31:16] (hex) => Board id, MBxxxx * bit [15:12] (dec) => Variant CPN (1....15) * bit [11:8] (dec) => Revision board (index with A = 1, Z = 26) @@ -49,6 +49,7 @@ static bool check_stboard(u16 board) 0x1298, 0x1341, 0x1497, + 0x1635, };
for (i = 0; i < ARRAY_SIZE(st_board_id); i++)