Re: Change in gic_lpi_tables_init() function

7 Sep 2020


      Hi Priyanka,
On Mon, Sep 7, 2020 at 2:26 PM Priyanka Jain priyanka.jain@nxp.com wrote:
...
Hello Rayagonda,
With today top of upstream u-boot tree, I am still getting the error in
booting lx216ardb
U-Boot 2020.10-rc3-00086-ge5df264e7a (Sep 07 2020 - 14:13:57 +0530)
<snip>
“Error binding driver 'gic-v3': -96
Some drivers failed to bind
initcall sequence 00000000fbdcf368 failed at call 000000008201b5e4
(err=-96)
### ERROR ### Please RESET the board ###
But if apply the changes suggested by you, it is booting fine. Can you
please help to send the pull-request for this soon , so that proper fixes
are integrated in u-boot code before U-boot v2020.10 release.
It was working for me long back without this patch.
Could you please send this patch as you can reproduce it and test it.
Please let me know.
Best regards,
Rayagonda
...
Thanks
Priyanka
*From:* Rayagonda Kokatanur rayagonda.kokatanur@broadcom.com
*Sent:* Friday, September 4, 2020 10:50 PM
*To:* Priyanka Jain priyanka.jain@nxp.com
*Cc:* Z.q. Hou zhiqiang.hou@nxp.com; Wasim Khan wasim.khan@nxp.com;
Bharat Gooty bharat.gooty@broadcom.com; Manish Tomar <
manish.tomar@nxp.com>; Xiaobo Xie xiaobo.xie@nxp.com; Jiafei Pan <
jiafei.pan@nxp.com>; Meenakshi Aggarwal meenakshi.aggarwal@nxp.com
*Subject:* Re: Change in gic_lpi_tables_init() function
Hi Priyanka,
Please add the following code at the end of "arch/arm/lib/gic-v3-its.c"
file,
This is not required for the latest uboot hence its not part of the patch.
UCLASS_DRIVER(irq) = {
.id = UCLASS_IRQ,
.name = "irq",
};
Best regards,
Rayagonda
On Fri, Sep 4, 2020 at 9:38 PM Priyanka Jain priyanka.jain@nxp.com
wrote:
Hello Rayagonda,
I am getting below error with top of tree upstream on lx2160ardb. Any
pointer here.
U-Boot 2020.10-rc3-00082-g9bfb567e5f (Sep 04 2020 - 21:27:29 +0530)
SoC:  LX2160ACE Rev2.0 (0x87360020)
Clock Configuration:
   CPU0(A72):1900 MHz  CPU1(A72):1900 MHz  CPU2(A72):1900 MHz

   CPU3(A72):1900 MHz  CPU4(A72):1900 MHz  CPU5(A72):1900 MHz

   CPU6(A72):1900 MHz  CPU7(A72):1900 MHz  CPU8(A72):1900 MHz

   CPU9(A72):1900 MHz  CPU10(A72):1900 MHz  CPU11(A72):1900 MHz

   CPU12(A72):1900 MHz  CPU13(A72):1900 MHz  CPU14(A72):1900 MHz

   CPU15(A72):1900 MHz

   Bus:      600  MHz  DDR:      2600 MT/s


Reset Configuration Word (RCW):
   00000000: 4c6b6b30 204c004c 00000000 00000000

   00000010: 00000000 0c010000 00000000 00000000

   00000020: 02e001a0 00002580 00000000 00000096

   00000030: 00000000 00000000 00000000 00000000

   00000040: 00000000 00000000 00000000 00000000

   00000050: 00000000 00000000 00000000 00000000

   00000060: 00000000 00000000 00027000 00000000

   00000070: 08b30010 00150020


Model: NXP Layerscape LX2160ARDB Board
Board: LX2160ACE Rev2.0-RDB, Board version: B, boot from FlexSPI DEV#1
FPGA: v5.0
SERDES1 Reference: Clock1 = 161.13MHz Clock2 = 161.13MHz
SERDES2 Reference: Clock1 = 100MHz Clock2 = 100MHz
SERDES3 Reference: Clock1 = 100MHz Clock2 = 100MHz
VID: Core voltage after adjustment is at 851 mV
DRAM:  31.9 GiB
DDR    31.9 GiB (DDR4, 64-bit, CL=19, ECC on)
   DDR Controller Interleaving Mode: 256B

   DDR Chip-Select Interleaving Mode: CS0+CS1


Error binding driver 'gic-v3': -96
Some drivers failed to bind
initcall sequence 00000000fbdcf368 failed at call 000000008201b5e4
(err=-96)
### ERROR ### Please RESET the board ###
Regards
Priyanka