Hi,
I'm running v2011.12-rc1 (with one missing usdhc patch applied) on mx6qarm2 board, and seeing a problem. When I install u-boot on a blank SD card, it boots fine with messge "*** Warning - bad CRC, using default environment" seen as expected. But once I run command 'save' to write envs to the card, the card stop booting.
I tracked the issue a little bit, and found __mmc_get_env_addr() does not get called at all. Therefore when I run 'save' for the first time, the envs are written to offset 0 of the card, which in turn overwrites the boot image.
I have not figured out why it does. But the following change fixes the problem for me.
diff --git a/common/env_mmc.c b/common/env_mmc.c index 8441c77..3832fe4 100644 --- a/common/env_mmc.c +++ b/common/env_mmc.c @@ -46,13 +46,11 @@ DECLARE_GLOBAL_DATA_PTR; #define CONFIG_ENV_OFFSET 0 #endif
-static int __mmc_get_env_addr(struct mmc *mmc, u32 *env_addr) +static int mmc_get_env_addr(struct mmc *mmc, u32 *env_addr) { *env_addr = CONFIG_ENV_OFFSET; return 0; } -int mmc_get_env_addr(struct mmc *mmc, u32 *env_addr) - __attribute__((weak, alias("__mmc_get_env_addr")));
Any comment on why the change fixes the problem is appreciated.