The GPIO0_C3 pin is changed to use func-3 using pcie30x1m0_pins during probe of pcie3x1. This cause the device to lock-up when pci driver use the reset-gpios unless the pin is first changed to use gpio pinmux.
Drop the board u-boot.dtsi workaround now that the gpio and pinctrl drivers automatically use gpio pinmux when a gpio is requested.
Signed-off-by: Jonas Karlman jonas@kwiboo.se --- arch/arm/dts/rk3568-radxa-e25-u-boot.dtsi | 12 ------------ 1 file changed, 12 deletions(-)
diff --git a/arch/arm/dts/rk3568-radxa-e25-u-boot.dtsi b/arch/arm/dts/rk3568-radxa-e25-u-boot.dtsi index 74755a44eaee..00fa0dfee19c 100644 --- a/arch/arm/dts/rk3568-radxa-e25-u-boot.dtsi +++ b/arch/arm/dts/rk3568-radxa-e25-u-boot.dtsi @@ -2,18 +2,6 @@
#include "rk356x-u-boot.dtsi"
-&pcie3x1 { - pinctrl-0 = <&pcie30x1_reset_h>; -}; - -&pinctrl { - pcie { - pcie30x1_reset_h: pcie30x1-reset-h { - rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - &sdhci { cap-mmc-highspeed; mmc-hs200-1_8v;