On 4/29/19 2:47 PM, Tom Rini wrote:
On Mon, Apr 29, 2019 at 02:34:32PM +0200, Michael Nazzareno Trimarchi wrote:
Hi Marek
On Mon, Apr 29, 2019 at 1:27 PM Marek Vasut marex@denx.de wrote:
On 4/29/19 1:24 PM, Tom Rini wrote:
On Mon, Apr 29, 2019 at 01:06:57PM +0200, Marek Vasut wrote:
On 4/29/19 1:02 PM, Jagan Teki wrote:
On Mon, Apr 29, 2019 at 4:28 PM Marek Vasut marex@denx.de wrote: > > On 4/29/19 12:40 PM, Jagan Teki wrote: >> On Mon, Apr 29, 2019 at 3:24 PM Marek Vasut marex@denx.de wrote: >>> >>> On 4/28/19 10:47 PM, Jagan Teki wrote: >>>> Mark MXS_SPI has BROKEN, this so the resulting build shows >>>> warning for broken configuration enabled and associated code >>>> will remove in v2019.07 release. >>> >>> But the code is not broken, it works fine, right ? >> >> Yes the code work fine, but dm conversion not done yet. Now the >> CONFIG_BROKEN can mark the driver configs which doesn't convert dm > > That makes no sense, if the code works, it works and thus it is NOT > broken. Find some other way to flag it as non-DM-converted, not this hack.
np, It depends on whether we consider non-dm code(for legacy SPI drivers) is broken or not, let Tom comment on this.
Again, the code works, it's not broken. That's very clear. DM conversion is a separate matter, so let's not overload CONFIG_BROKEN for such things. The Makefile warning seems sufficient to me.
The code is broken because it doesn't work with DM and is going to be removed due to lack of maintenance soon. My problem with this series, but I need to check that we can do what I want to do and still keep travis green, is have this (and the other non-converted and thus non-maintained drivers) depend on, not select BROKEN.
The Makefile warnings tell people the code is going to be removed and I'm trying to have the window be:
- LOUD warning about needing work
- 1 release past those loud deadlines of the code there, but not built
unless you enable BROKEN (as yes, I see code that's not updated to use DM as being broken) 3) Code removed.
All that said, I continue to be open to delaying conversion / removal if we're having:
- A discussion and proposed patches to do the conversion, but people need more time. The work is in progress, but people need time as it's not as easy to convert as hoped for various reasons.
- A problem converting the driver to DM as it's highlighting some other problem within DM or hitting a size constraint or other problem.
- Someone who is willing to do the DM work is just now seeing this. Yes, this is possible especially since our LOUD Makefile warnings are also easy enough to miss if you're just automating the build and not doing it manually.
But I am not fine with:
- Code that isn't converted AND
- Code that no one seems to be converting AND
- Code that no one says they are going to convert AND
- The conversion deadline has past.
Seems there was some offer from Amarula to convert it , no ?
we can do some job on imx28 because we have a board there. I have asked to mainline it
OK, good. Can you and Marek please coordinate on:
- Updating MAINTAINERS files
- Dropping the boards that won't be supported moving forward (even if you can't mainline the custom board, there must be a ref platform you have/use, yes?).
Might make sense to keep the MX28EVK, I'll ask about the other boards, but I think they could be dropped.
And Michael, can you please subscribe to the u-boot-maintainers list?
Jagan, was there an old patch to try and convert this driver that may be of help to Michael? Thanks!