The Ethernet controller and PHY use the device tree info to configure themselves, so it's not necessary to manually do it in the board file. This permits the removal of a bunch of headers as well.
Signed-off-by: Adam Ford aford173@gmail.com
diff --git a/board/beacon/imx8mm/imx8mm_beacon.c b/board/beacon/imx8mm/imx8mm_beacon.c index c228bbf777..204235a3f8 100644 --- a/board/beacon/imx8mm/imx8mm_beacon.c +++ b/board/beacon/imx8mm/imx8mm_beacon.c @@ -1,52 +1,13 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright 2020 Compass Electronics Group, LLC + * Copyright 2022 Logic PD, Inc. dba Beacon EmbeddedWorks */
-#include <common.h> -#include <miiphy.h> -#include <netdev.h> #include <asm/global_data.h>
-#include <asm/arch/clock.h> -#include <asm/arch/sys_proto.h> -#include <asm/io.h> - DECLARE_GLOBAL_DATA_PTR;
-#if IS_ENABLED(CONFIG_FEC_MXC) -static int setup_fec(void) -{ - struct iomuxc_gpr_base_regs *gpr = - (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; - - /* Use 125M anatop REF_CLK1 for ENET1, not from external */ - clrsetbits_le32(&gpr->gpr[1], 0x2000, 0); - - return 0; -} - -int board_phy_config(struct phy_device *phydev) -{ - /* enable rgmii rxc skew and phy mode select to RGMII copper */ - phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); - phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8); - - phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x00); - phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x82ee); - phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); - phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); - - if (phydev->drv->config) - phydev->drv->config(phydev); - return 0; -} -#endif - int board_init(void) { - if (IS_ENABLED(CONFIG_FEC_MXC)) - setup_fec(); - return 0; } diff --git a/board/beacon/imx8mn/imx8mn_beacon.c b/board/beacon/imx8mn/imx8mn_beacon.c index 6397dac872..204235a3f8 100644 --- a/board/beacon/imx8mn/imx8mn_beacon.c +++ b/board/beacon/imx8mn/imx8mn_beacon.c @@ -1,52 +1,13 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright 2020 Compass Electronics Group, LLC + * Copyright 2022 Logic PD, Inc. dba Beacon EmbeddedWorks */
-#include <common.h> -#include <miiphy.h> -#include <netdev.h> - -#include <asm/arch/clock.h> -#include <asm/arch/sys_proto.h> #include <asm/global_data.h> -#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
-#if IS_ENABLED(CONFIG_FEC_MXC) -static int setup_fec(void) -{ - struct iomuxc_gpr_base_regs *gpr = - (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; - - /* Use 125M anatop REF_CLK1 for ENET1, not from external */ - clrsetbits_le32(&gpr->gpr[1], 0x2000, 0); - - return 0; -} - -int board_phy_config(struct phy_device *phydev) -{ - /* enable rgmii rxc skew and phy mode select to RGMII copper */ - phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); - phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8); - - phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x00); - phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x82ee); - phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); - phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); - - if (phydev->drv->config) - phydev->drv->config(phydev); - return 0; -} -#endif - int board_init(void) { - if (IS_ENABLED(CONFIG_FEC_MXC)) - setup_fec(); - return 0; }