Jason Kridner wrote, on 11/05/2010 01:46 AM:
From: Koen Kooikoen@dominion.thruhere.net
Patch was updated by Jason Kridnerjkridner@beagleboard.org:
- Use tabs to match style of other board revisions
- Only include board revisions that exist
- Default to the same configuration as the latest revision, but without setting 'beaglerev'
Signed-off-by: Jason Kridnerjkridner@beagleboard.org
not signed-off-by: Koen?
board/ti/beagle/beagle.c | 20 +++++++++++++++++++- board/ti/beagle/beagle.h | 3 ++- 2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 520e57d..93c452e 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -176,7 +176,7 @@ int misc_init_r(void) TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, TWL4030_PM_RECEIVER_DEV_GRP_P1); break;
- case REVISION_XM:
- case REVISION_XM_A: printf("Beagle xM Rev A\n"); setenv("beaglerev", "xMA"); setenv("mpurate", "1000");
@@ -187,8 +187,26 @@ int misc_init_r(void) TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, TWL4030_PM_RECEIVER_DEV_GRP_P1); break;
- case REVISION_XM_B:
printf("Beagle xM Rev B\n");setenv("beaglerev", "xMB");setenv("mpurate", "1000");MUX_BEAGLE_XM();/* Set VAUX2 to 1.8V for EHCI PHY */twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,TWL4030_PM_RECEIVER_VAUX2_VSEL_18,TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,TWL4030_PM_RECEIVER_DEV_GRP_P1);break;setenv("mpurate", "1000");
It looks to me looking at the file that mpurate usage is CPU based and NOT board based.. maybe you should use the cpu idendity to decide on mpurate instead?
MUX_BEAGLE_XM();/* Set VAUX2 to 1.8V for EHCI PHY */twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,TWL4030_PM_RECEIVER_VAUX2_VSEL_18,TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,TWL4030_PM_RECEIVER_DEV_GRP_P1);}
switch (get_expansion_id()) {
diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h index 7d8dee0..fa893c4 100644 --- a/board/ti/beagle/beagle.h +++ b/board/ti/beagle/beagle.h @@ -37,7 +37,8 @@ const omap3_sysinfo sysinfo = { #define REVISION_AXBX 0x7 #define REVISION_CX 0x6 #define REVISION_C4 0x5 -#define REVISION_XM 0x0 +#define REVISION_XM_A 0x0 +#define REVISION_XM_B 0x1
/*
- IEN - Input Enable