Hi Tony,
On 31.08.22 07:08, Stefan Roese wrote:
Hi Tony,
On 31.08.22 07:02, Stefan Roese wrote:
Hi Tony,
On 31.08.22 00:15, Tony Dinh wrote:
Hi Stefan,
On Tue, Aug 30, 2022 at 4:53 AM Stefan Roese sr@denx.de wrote:
This patchset enhaces the recently added Orion Timer driver to support all other Kirkwood & 32bit MVEBU Armada platforms. Additionally, this timer support is then enabled per default for those platforms, so that the board config files don't need to be changed. Also necessary is some dts hacking, so that the timer DT node is available in early U-Boot stages.
I've successfully tested this patchset on an Armada XP board. Additional test on other boards and platforms are very welcome and necessary.
I've run some tests with the following 2 Kirkwood boards: Cloud Engines Pogo V4 88F6192 (with CONFIG_DM_RTC and CONFIG_RTC_EMULATION), and Marvell Sheevaplug 88F6281 (with CONFIG_DM_RTC and CONFIG_RTC_MV).
It seems that it was either frozen or the timer did not expire at some subsequent sleep commands. Sometime it happened at 2nd command, some time at a later sleep command. For example,
=== Pogo V4 (the 1st sleep command works correctly at 10 seconds on my stopwatch)
U-Boot 2022.10-rc3-00048-g66ccd87a9c-dirty (Aug 30 2022 - 13:38:24 -0700) Pogoplug V4
Hit any key to stop autoboot: 0 Pogo_V4> sleep 10 Pogo_V4> sleep 31.5
<frozen here>
Does the cmd interface support fractial numbers? Please test again with 31 or other integral numbers.
=== Sheevaplug (RTC battery is old, so the date was not updated, but the clock seems OK)
U-Boot 2022.10-rc3-00048-g66ccd87a9c-dirty (Aug 30 2022 - 14:14:24 -0700) Marvell-Sheevaplug Hit any key to stop autoboot: 0 => date Date: 2000-01-01 (Saturday) Time: 0:02:55 => sleep 10 => date Date: 2000-01-01 (Saturday) Time: 0:03:18 => sleep 10 => sleep 20.1
<frozen here>
Please let me know what I can do (i.e. perhaps running a debug patch).
Please see above. I assume that the fractional numbers result in very long numbers internally, which result in a frozen / hanging system.
I just tested fractional numbers on another board and hey, it just works. Learned something new. So we seem to have a problem here. Let me see, if I can find something.
I can't reproduce this problem on my Armada XP platform. When your system is frozen, can you interrupt the sleep cmd via Ctrl-C? Can you please also test without this patchset applied, if a series of sleep commands works fine there?
Thanks, Stefan