Hi Patrick
On 6/30/22 10:20, Patrick Delaunay wrote:
Device tree alignment with Linux kernel v5.19-rc1 with:
- ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk
- ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dk
- ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on stm32mp131
- ARM: dts: stm32: enable RTC support on stm32mp135f-dk
- ARM: dts: stm32: add RTC node on stm32mp131
- ARM: dts: stm32: fix pinctrl node name warnings (MPU soc)
Signed-off-by: Patrick Delaunay patrick.delaunay@foss.st.com
(no changes since v1)
arch/arm/dts/stm32mp131.dtsi | 19 ++++++++++++++++++- arch/arm/dts/stm32mp135f-dk.dts | 29 +++++++++++++++++++++++++++++ 2 files changed, 47 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi index 950e172e455..a30989f287e 100644 --- a/arch/arm/dts/stm32mp131.dtsi +++ b/arch/arm/dts/stm32mp131.dtsi @@ -75,6 +75,12 @@ compatible = "fixed-clock"; clock-frequency = <99000000>; };
clk_rtc_k: clk-rtc-k {#clock-cells = <0>;compatible = "fixed-clock";clock-frequency = <32768>;};};
intc: interrupt-controller@a0021000 {
@@ -218,6 +224,15 @@ status = "disabled"; };
rtc: rtc@5c004000 {compatible = "st,stm32mp1-rtc";reg = <0x5c004000 0x400>;interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;clocks = <&clk_pclk4>, <&clk_rtc_k>;clock-names = "pclk", "rtc_ck";status = "disabled";};- bsec: efuse@5c005000 { compatible = "st,stm32mp13-bsec"; reg = <0x5c005000 0x400>;
@@ -239,11 +254,13 @@ * Break node order to solve dependency probe issue between * pinctrl and exti. */
pinctrl: pin-controller@50002000 {
pinctrl: pinctrl@50002000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32mp135-pinctrl"; ranges = <0 0x50002000 0x8400>;interrupt-parent = <&exti>;st,syscfg = <&exti 0x60 0xff>; pins-are-numbered; gpioa: gpio@50002000 {diff --git a/arch/arm/dts/stm32mp135f-dk.dts b/arch/arm/dts/stm32mp135f-dk.dts index ee100d108ea..09d6226d598 100644 --- a/arch/arm/dts/stm32mp135f-dk.dts +++ b/arch/arm/dts/stm32mp135f-dk.dts @@ -6,6 +6,9 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "stm32mp135.dtsi" #include "stm32mp13xf.dtsi" #include "stm32mp13-pinctrl.dtsi" @@ -23,6 +26,28 @@ reg = <0xc0000000 0x20000000>; };
- gpio-keys {
compatible = "gpio-keys";user-pa13 {label = "User-PA13";linux,code = <BTN_1>;gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;};- };
- leds {
compatible = "gpio-leds";led-blue {function = LED_FUNCTION_HEARTBEAT;color = <LED_COLOR_ID_BLUE>;gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;linux,default-trigger = "heartbeat";default-state = "off";};- };
- vdd_sd: vdd-sd { compatible = "regulator-fixed"; regulator-name = "vdd_sd";
@@ -37,6 +62,10 @@ status = "okay"; };
+&rtc {
- status = "okay";
+};
&sdmmc1 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com
Thanks Patrice