This board has not been converted to generic board by the deadline. Remove it.
Signed-off-by: Simon Glass sjg@chromium.org ---
arch/arm/Kconfig | 5 - board/logicpd/imx31_litekit/Kconfig | 15 --- board/logicpd/imx31_litekit/MAINTAINERS | 6 - board/logicpd/imx31_litekit/Makefile | 9 -- board/logicpd/imx31_litekit/imx31_litekit.c | 91 --------------- board/logicpd/imx31_litekit/lowlevel_init.S | 87 -------------- configs/imx31_litekit_defconfig | 4 - include/configs/imx31_litekit.h | 171 ---------------------------- 8 files changed, 388 deletions(-) delete mode 100644 board/logicpd/imx31_litekit/Kconfig delete mode 100644 board/logicpd/imx31_litekit/MAINTAINERS delete mode 100644 board/logicpd/imx31_litekit/Makefile delete mode 100644 board/logicpd/imx31_litekit/imx31_litekit.c delete mode 100644 board/logicpd/imx31_litekit/lowlevel_init.S delete mode 100644 configs/imx31_litekit_defconfig delete mode 100644 include/configs/imx31_litekit.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 36ec100..9016bfd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -250,10 +250,6 @@ config TARGET_TT01 bool "Support tt01" select CPU_ARM1136
-config TARGET_IMX31_LITEKIT - bool "Support imx31_litekit" - select CPU_ARM1136 - config TARGET_WOODBURN bool "Support woodburn" select CPU_ARM1136 @@ -916,7 +912,6 @@ source "board/isee/igep0033/Kconfig" source "board/jornada/Kconfig" source "board/karo/tx25/Kconfig" source "board/kosagi/novena/Kconfig" -source "board/logicpd/imx31_litekit/Kconfig" source "board/maxbcm/Kconfig" source "board/mpl/vcma9/Kconfig" source "board/olimex/mx23_olinuxino/Kconfig" diff --git a/board/logicpd/imx31_litekit/Kconfig b/board/logicpd/imx31_litekit/Kconfig deleted file mode 100644 index d90f854..0000000 --- a/board/logicpd/imx31_litekit/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_IMX31_LITEKIT - -config SYS_BOARD - default "imx31_litekit" - -config SYS_VENDOR - default "logicpd" - -config SYS_SOC - default "mx31" - -config SYS_CONFIG_NAME - default "imx31_litekit" - -endif diff --git a/board/logicpd/imx31_litekit/MAINTAINERS b/board/logicpd/imx31_litekit/MAINTAINERS deleted file mode 100644 index 8e3608e..0000000 --- a/board/logicpd/imx31_litekit/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -IMX31_LITEKIT BOARD -#M: - -S: Maintained -F: board/logicpd/imx31_litekit/ -F: include/configs/imx31_litekit.h -F: configs/imx31_litekit_defconfig diff --git a/board/logicpd/imx31_litekit/Makefile b/board/logicpd/imx31_litekit/Makefile deleted file mode 100644 index 3fd71c8..0000000 --- a/board/logicpd/imx31_litekit/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := imx31_litekit.o -obj-y += lowlevel_init.o diff --git a/board/logicpd/imx31_litekit/imx31_litekit.c b/board/logicpd/imx31_litekit/imx31_litekit.c deleted file mode 100644 index 386e106..0000000 --- a/board/logicpd/imx31_litekit/imx31_litekit.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * - * (c) 2007 Pengutronix, Sascha Hauer s.hauer@pengutronix.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include <common.h> -#include <netdev.h> -#include <asm/arch/clock.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/sys_proto.h> - -DECLARE_GLOBAL_DATA_PTR; - -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, - PHYS_SDRAM_1_SIZE); - return 0; -} - -int board_early_init_f(void) -{ - /* CS0: Nor Flash */ - static const struct mxc_weimcs cs0 = { - /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ - CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 15, 0, 0, 3), - /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ - CSCR_L(10, 0, 3, 3, 0, 1, 5, 0, 0, 0, 0, 1), - /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ - CSCR_A(0, 0, 2, 2, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0) - }; - - /* CS4: Network Controller */ - static const struct mxc_weimcs cs4 = { - /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ - CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 28, 1, 7, 6), - /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ - CSCR_L(4, 4, 4, 10, 4, 0, 5, 4, 0, 0, 0, 1), - /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ - CSCR_A(4, 4, 4, 4, 0, 1, 4, 3, 0, 0, 0, 0, 1, 0) - }; - - mxc_setup_weimcs(0, &cs0); - mxc_setup_weimcs(4, &cs4); - - /* setup pins for UART1 */ - mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX); - mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX); - mx31_gpio_mux(MUX_RTS1__UART1_RTS_B); - mx31_gpio_mux(MUX_CTS1__UART1_CTS_B); - - /* SPI2 */ - mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B); - mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK); - mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B); - mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI); - mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO); - mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B); - mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B); - - /* start SPI2 clock */ - __REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4); - - return 0; -} - -int board_init(void) -{ - gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */ - - return 0; -} - -int checkboard(void) -{ - printf("Board: i.MX31 Litekit\n"); - return 0; -} - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC911X - rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); -#endif - return rc; -} diff --git a/board/logicpd/imx31_litekit/lowlevel_init.S b/board/logicpd/imx31_litekit/lowlevel_init.S deleted file mode 100644 index 7c456bc..0000000 --- a/board/logicpd/imx31_litekit/lowlevel_init.S +++ /dev/null @@ -1,87 +0,0 @@ -/* - * - * (c) 2007 Pengutronix, Sascha Hauer s.hauer@pengutronix.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/arch/imx-regs.h> - -.macro REG reg, val - ldr r2, =\reg - ldr r3, =\val - str r3, [r2] -.endm - -.macro REG8 reg, val - ldr r2, =\reg - ldr r3, =\val - strb r3, [r2] -.endm - -.macro DELAY loops - ldr r2, =\loops -1: - subs r2, r2, #1 - nop - bcs 1b -.endm - -.globl lowlevel_init -lowlevel_init: - - REG IPU_CONF, IPU_CONF_DI_EN - REG CCM_CCMR, 0x074B0BF5 - - DELAY 0x40000 - - REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE - REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS - - REG CCM_PDR0, PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | PDR0_PER_PODF(7) | PDR0_HSP_PODF(2) | PDR0_NFC_PODF(6) | PDR0_IPG_PODF(1) | PDR0_MAX_PODF(2) | PDR0_MCU_PODF(0) - - REG CCM_MPCTL, PLL_PD(0) | PLL_MFD(0x33) | PLL_MFI(7) | PLL_MFN(0x23) - REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1) - - REG 0x43FAC26C, 0 /* SDCLK */ - REG 0x43FAC270, 0 /* CAS */ - REG 0x43FAC274, 0 /* RAS */ - REG 0x43FAC27C, 0x1000 /* CS2 (CSD0) */ - REG 0x43FAC284, 0 /* DQM3 */ - REG 0x43FAC288, 0 /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) */ - REG 0x43FAC28C, 0 - REG 0x43FAC290, 0 - REG 0x43FAC294, 0 - REG 0x43FAC298, 0 - REG 0x43FAC29C, 0 - REG 0x43FAC2A0, 0 - REG 0x43FAC2A4, 0 - REG 0x43FAC2A8, 0 - REG 0x43FAC2AC, 0 - REG 0x43FAC2B0, 0 - REG 0x43FAC2B4, 0 - REG 0x43FAC2B8, 0 - REG 0x43FAC2BC, 0 - REG 0x43FAC2C0, 0 - REG 0x43FAC2C4, 0 - REG 0x43FAC2C8, 0 - REG 0x43FAC2CC, 0 - REG 0x43FAC2D0, 0 - REG 0x43FAC2D4, 0 - REG 0x43FAC2D8, 0 - REG 0x43FAC2DC, 0 - REG 0xB8001010, 0x00000004 - REG 0xB8001004, 0x006ac73a - REG 0xB8001000, 0x92100000 - REG 0x80000f00, 0x12344321 - REG 0xB8001000, 0xa2100000 - REG 0x80000000, 0x12344321 - REG 0x80000000, 0x12344321 - REG 0xB8001000, 0xb2100000 - REG8 0x80000033, 0xda - REG8 0x81000000, 0xff - REG 0xB8001000, 0x82226080 - REG 0x80000000, 0xDEADBEEF - REG 0xB8001010, 0x0000000c - - mov pc, lr diff --git a/configs/imx31_litekit_defconfig b/configs/imx31_litekit_defconfig deleted file mode 100644 index f10759b..0000000 --- a/configs/imx31_litekit_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_IMX31_LITEKIT=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="uboot> " diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h deleted file mode 100644 index 23e3a6c..0000000 --- a/include/configs/imx31_litekit.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments. - * Richard Woodruff r-woodruff2@ti.com - * Kshitij Gupta kshitij@ti.com - * - * Configuration settings for the LogicPD i.MX31 Litekit board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/imx-regs.h> - - /* High Level Configuration Options */ -#define CONFIG_MX31 1 /* This is a mx31 */ -#define CONFIG_MX31_CLK32 32000 - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -#define CONFIG_SYS_TEXT_BASE 0xa0000000 - -#define CONFIG_MACH_TYPE MACH_TYPE_MX31LITE - -/* Temporarily disabled */ -#if 0 -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_FIT 1 -#define CONFIG_FIT_VERBOSE 1 -#endif - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) - -/* - * Hardware drivers - */ - -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE -#define CONFIG_MXC_GPIO - -#define CONFIG_HARD_SPI 1 -#define CONFIG_MXC_SPI 1 -#define CONFIG_DEFAULT_SPI_BUS 1 -#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) - -/* PMIC Controller */ -#define CONFIG_POWER -#define CONFIG_POWER_SPI -#define CONFIG_POWER_FSL -#define CONFIG_FSL_PMIC_BUS 1 -#define CONFIG_FSL_PMIC_CS 0 -#define CONFIG_FSL_PMIC_CLK 1000000 -#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) -#define CONFIG_FSL_PMIC_BITLEN 32 -#define CONFIG_RTC_MC13XXX - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SPI -#define CONFIG_CMD_DATE -#define CONFIG_CMD_NAND - -#define CONFIG_BOOTDELAY 3 - -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.23.168 -#define CONFIG_SERVERIP 192.168.23.2 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \ - "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ - "bootcmd=run bootcmd_net\0" \ - "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; tftpboot 0x80000000 uImage-mx31; bootm\0" \ - "prg_uboot=tftpboot 0x80000000 u-boot-imx31_litekit.bin; protect off all; erase 0xa00d0000 0xa01effff; cp.b 0x80000000 0xa00d0000 $(filesize)\0" - - -#define CONFIG_SMC911X 1 -#define CONFIG_SMC911X_BASE (CS4_BASE + 0x00020000) -#define CONFIG_SMC911X_32_BIT 1 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x10000 - -#define CONFIG_SYS_LOAD_ADDR 0 /* default load address */ - -#define CONFIG_CMDLINE_EDITING 1 - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 CSD0_BASE -#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) -#define CONFIG_BOARD_EARLY_INIT_F - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_FLASH_BASE CS0_BASE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ - -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x001f0000) -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE (64 * 1024) -#define CONFIG_ENV_SIZE (64 * 1024) - -/*----------------------------------------------------------------------- - * CFI FLASH driver setup - */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* - * JFFS2 partitions - */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" - -/* - * NAND flash - */ -#define CONFIG_NAND_MXC -#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR -#define CONFIG_MXC_NAND_HWECC - -#endif /* __CONFIG_H */