Hi Andrew,
On Apr 3, 2014, at 12:34 PM, Andrew Gabbasov wrote:
MMC switch command for unsupported feature (e.g. bus width) sets a switch error bit in card status. This bit should be checked, and, if it's set, no access with new controller settings should be performed.
Signed-off-by: Andrew Gabbasov andrew_gabbasov@mentor.com
drivers/mmc/mmc.c | 4 +++- include/mmc.h | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 16051e5..a850085 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -150,6 +150,8 @@ int mmc_send_status(struct mmc *mmc, int timeout) #endif return TIMEOUT; }
if (cmd.response[0] & MMC_STATUS_SWITCH_ERROR)
return SWITCH_ERR;return 0;
} @@ -501,7 +503,7 @@ static int mmc_change_freq(struct mmc *mmc) err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, 1);
if (err)
return err;
return err == SWITCH_ERR ? 0 : err;/* Now check to see that it worked */ err = mmc_send_ext_csd(mmc, ext_csd);
diff --git a/include/mmc.h b/include/mmc.h index c0a1d9e..213c112 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -53,6 +53,7 @@ #define COMM_ERR -18 /* Communications Error */ #define TIMEOUT -19 #define IN_PROGRESS -20 /* operation is in progress */ +#define SWITCH_ERR -21 /* Card reports failure to switch mode */
#define MMC_CMD_GO_IDLE_STATE 0 #define MMC_CMD_SEND_OP_COND 1 @@ -108,6 +109,7 @@ #define SECURE_ERASE 0x80000000
#define MMC_STATUS_MASK (~0x0206BF7F) +#define MMC_STATUS_SWITCH_ERROR (1 << 7) #define MMC_STATUS_RDY_FOR_DATA (1 << 8) #define MMC_STATUS_CURR_STATE (0xf << 9)
#define MMC_STATUS_ERROR (1 << 19)
1.7.10.4
Applied,
Thanks
--Pantelis
Acked-by: Pantelis Antoniou panto@antoniou-consulting.com