On Wed, Nov 10, 2021 at 02:26:54PM -0800, Vagrant Cascadian wrote:
On 2021-09-02, Patrick Wildt wrote:
The MNT Reform 2 is a modular DIY laptop. In its initial version it is based on the BoundaryDevices i.MX8MQ SoM. Some parts have been lifted from BoundaryDevices official U-Boot downstream project.
Thanks for working on this!
I'm struggling a bit getting it to actually boot; how is this supposed to be installed to the device?
I've built with the two applied patches on a patched v2021.10, copying various firmware parts from:
https://source.mnt.re/reform/reform-boundary-uboot/-/blob/master/bl31-iMX8MQ... https://source.mnt.re/reform/reform-boundary-uboot/-/blob/master/lpddr4_pmu_... https://source.mnt.re/reform/reform-boundary-uboot/-/blob/master/lpddr4_pmu_... https://source.mnt.re/reform/reform-boundary-uboot/-/blob/master/lpddr4_pmu_... https://source.mnt.re/reform/reform-boundary-uboot/-/blob/master/lpddr4_pmu_...
export BL31=bl31-iMX8MQ.bin
make imx8mq_reform2_defconfig make make flash.bin
Then grepping various other README's from imx8mq devices, I tried two different processes:
dd if=flash.bin of=/dev/sd[x] bs=1K seek=33
You only need to dd flash.bin, the command looks fine.
and:
dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=sync dd if=u-boot.itb of=/dev/sd[x] bs=1024 seek=384 conv=sync
Both simply hanging with:
U-Boot SPL 2021.10 (Jan 01 1970 - 00:00:01 +0000)
There have been a few changes in U-Boot since I sent my patchset, it's possible the diff by itself might not be enough.
I will send out a new patchset soon, but the move to Binman doesn't work for me yet. It's weird, because I don't see a diff to other i.MX8MQ platforms, so I'm still debugging that. Maybe the other i.MX8MQ boards don't work with Binman either?
Keep note that the build procedure (how to supply bl31) changes once Binman is used.
Is the flash.bin step unecessary? I see DDR timing code in the patch series; are corresponding lpddr4*.bin no longer necessary?
The flash.bin has all bits: U-Boot, U-Boot SPL, lpddr4*.bin and bl31.bin
lpddr4*.bin is the firmware for the DDR controller. So you need the timing information *and* the firmware.
I also tried building with an old version of arm-trusted-firmware (v2.2), as that was the most recent upstream version that successfully built. This seems to be a fork of ATF that has support for iMX8MQ, but it is unclear which branch/tag/etc. should be used with the mnt/reform:
Not sure right now, but I think I was using the one that's build on OpenBSD-current, which seems to be arm-trusted-firmware 2.5. I'll check it.
It would be nice to include a board README in the next patch revision to spell out some of the details of exactly which other projects and versions/comments/branches are expected to work with MNT Reform2.
This is nothing specific to the MNT Reform2. It's the same for all i.MX8MQ boards. ATF+DDR+U-Boot have to work together, and it doesn't matter which board it is. Hence I don't believe providing that kind information in a Reform-specific README makes sense.
Patrick
I would be nice if you could CC me on future patch series revisions to be able to test. Thanks!
live well, vagrant
Signed-off-by: Patrick Wildt patrick@blueri.se
arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi | 11 + arch/arm/mach-imx/imx8m/Kconfig | 6 + board/mntre/imx8mq_reform2/Kconfig | 12 + board/mntre/imx8mq_reform2/MAINTAINERS | 7 + board/mntre/imx8mq_reform2/Makefile | 12 + board/mntre/imx8mq_reform2/imx8mq_reform2.c | 213 ++++ board/mntre/imx8mq_reform2/lpddr4_timing.c | 1014 +++++++++++++++++ .../mntre/imx8mq_reform2/lpddr4_timing_ch2.h | 95 ++ board/mntre/imx8mq_reform2/spl.c | 260 +++++ configs/imx8mq_reform2_defconfig | 67 ++ include/configs/imx8mq_reform2.h | 151 +++ 11 files changed, 1848 insertions(+) create mode 100644 arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi create mode 100644 board/mntre/imx8mq_reform2/Kconfig create mode 100644 board/mntre/imx8mq_reform2/MAINTAINERS create mode 100644 board/mntre/imx8mq_reform2/Makefile create mode 100644 board/mntre/imx8mq_reform2/imx8mq_reform2.c create mode 100644 board/mntre/imx8mq_reform2/lpddr4_timing.c create mode 100644 board/mntre/imx8mq_reform2/lpddr4_timing_ch2.h create mode 100644 board/mntre/imx8mq_reform2/spl.c create mode 100644 configs/imx8mq_reform2_defconfig create mode 100644 include/configs/imx8mq_reform2.h