To add the Cadence SPI driver support for Altera SOCFPGA. It required information such as clocks and timing from platform's configuration header file within include/configs folder
Signed-off-by: Chin Liang See clsee@altera.com Cc: Jagan Teki jagannadh.teki@gmail.com Cc: Gerhard Sittig gsi@denx.de --- Changes for v3 - Moved the documentation from doc folder to driver - Documented down macro specific to driver only Changes for v2 - Combine driver into single C file instead of 2 - Added documentation on the macro used - Using structure for registers instead of macro --- drivers/spi/Makefile | 1 + drivers/spi/cadence_qspi.c | 1018 ++++++++++++++++++++++++++++++++++++++++++++ drivers/spi/cadence_qspi.h | 196 +++++++++ 3 files changed, 1215 insertions(+) create mode 100644 drivers/spi/cadence_qspi.c create mode 100644 drivers/spi/cadence_qspi.h
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index ed4ecd7..b8d56ea 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_ATMEL_DATAFLASH_SPI) += atmel_dataflash_spi.o obj-$(CONFIG_ATMEL_SPI) += atmel_spi.o obj-$(CONFIG_BFIN_SPI) += bfin_spi.o obj-$(CONFIG_BFIN_SPI6XX) += bfin_spi6xx.o +obj-$(CONFIG_CADENCE_QSPI) += cadence_qspi.o obj-$(CONFIG_CF_SPI) += cf_spi.o obj-$(CONFIG_CF_QSPI) += cf_qspi.o obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c new file mode 100644 index 0000000..4712b45 --- /dev/null +++ b/drivers/spi/cadence_qspi.c @@ -0,0 +1,1018 @@ +/* + * (C) Copyright 2014 Altera Corporation <www.altera.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <malloc.h> +#include <spi.h> +#include "cadence_qspi.h" + +static int qspi_is_init; +static unsigned int qspi_calibrated_hz; +static unsigned int qspi_calibrated_cs; + +static const struct cadence_qspi *cadence_qspi_base = (void *)QSPI_BASE; + +#define to_cadence_qspi_slave(s) \ + container_of(s, struct cadence_qspi_slave, slave) + +#define CQSPI_CAL_DELAY(tdelay_ns, tref_ns, tsclk_ns) \ + ((((tdelay_ns) - (tsclk_ns)) / (tref_ns))) + +#define CQSPI_GET_WR_SRAM_LEVEL() \ + ((readl(&cadence_qspi_base->sramfill) >> \ + CQSPI_REG_SRAMLEVEL_WR_LSB) & CQSPI_REG_SRAMLEVEL_WR_MASK) + +static unsigned int cadence_qspi_apb_cmd2addr(const unsigned char *addr_buf, + unsigned int addr_width) +{ + unsigned int addr; + + addr = (addr_buf[0] << 16) | (addr_buf[1] << 8) | addr_buf[2]; + + if (addr_width == 4) + addr = (addr << 8) | addr_buf[3]; + + return addr; +} + +static void cadence_qspi_apb_read_fifo_data(void *dest, + const void *src_ahb_addr, unsigned int bytes) +{ + unsigned int temp; + int remaining = bytes; + unsigned int *dest_ptr = (unsigned int *)dest; + unsigned int *src_ptr = (unsigned int *)src_ahb_addr; + + while (remaining > 0) { + if (remaining >= CQSPI_FIFO_WIDTH) { + *dest_ptr = readl(src_ptr); + remaining -= CQSPI_FIFO_WIDTH; + } else { + /* dangling bytes */ + temp = readl(src_ptr); + memcpy(dest_ptr, &temp, remaining); + break; + } + dest_ptr++; + } + + return; +} + +static void cadence_qspi_apb_write_fifo_data(const void *dest_ahb_addr, + const void *src, unsigned int bytes) +{ + unsigned int temp; + int remaining = bytes; + unsigned int *dest_ptr = (unsigned int *)dest_ahb_addr; + unsigned int *src_ptr = (unsigned int *)src; + + while (remaining > 0) { + if (remaining >= CQSPI_FIFO_WIDTH) { + writel(*src_ptr, dest_ptr); + remaining -= sizeof(unsigned int); + } else { + /* dangling bytes */ + memcpy(&temp, src_ptr, remaining); + writel(temp, dest_ptr); + break; + } + src_ptr++; + } + + return; +} + +/* Read from SRAM FIFO with polling SRAM fill level. */ +static int qspi_read_sram_fifo_poll(void *dest_addr, + const void *src_addr, unsigned int num_bytes) +{ + unsigned int remaining = num_bytes; + unsigned int retry; + unsigned int sram_level = 0; + unsigned char *dest = (unsigned char *)dest_addr; + + while (remaining > 0) { + retry = CQSPI_REG_RETRY; + while (retry--) { + sram_level = (readl(&cadence_qspi_base->sramfill) >> + CQSPI_REG_SRAMLEVEL_RD_LSB) & + CQSPI_REG_SRAMLEVEL_RD_MASK; + if (sram_level) + break; + udelay(1); + } + + if (!retry) { + printf("QSPI: No receive data after polling for %d " + "times\n", CQSPI_REG_RETRY); + return -1; + } + + sram_level *= CQSPI_FIFO_WIDTH; + sram_level = sram_level > remaining ? remaining : sram_level; + + /* Read data from FIFO. */ + cadence_qspi_apb_read_fifo_data(dest, src_addr, sram_level); + dest += sram_level; + remaining -= sram_level; + udelay(1); + } + return 0; +} + + +/* Write to SRAM FIFO with polling SRAM fill level. */ +static int qpsi_write_sram_fifo_push(void *dest_addr, + const void *src_addr, unsigned int num_bytes) +{ + unsigned int retry = CQSPI_REG_RETRY; + unsigned int sram_level; + unsigned int wr_bytes; + unsigned char *src = (unsigned char *)src_addr; + int remaining = num_bytes; + unsigned int page_size = CONFIG_CQSPI_PAGE_SIZE; + unsigned int sram_threshold_words = CQSPI_REG_SRAM_THRESHOLD_WORDS; + + while (remaining > 0) { + retry = CQSPI_REG_RETRY; + while (retry--) { + sram_level = CQSPI_GET_WR_SRAM_LEVEL(); + if (sram_level <= sram_threshold_words) + break; + } + if (!retry) { + printf("QSPI: SRAM fill level (0x%08x) " + "not hit lower expected level (0x%08x)", + sram_level, sram_threshold_words); + return -1; + } + /* Write a page or remaining bytes. */ + wr_bytes = (remaining > page_size) ? + page_size : remaining; + + cadence_qspi_apb_write_fifo_data(dest_addr, src, wr_bytes); + src += wr_bytes; + remaining -= wr_bytes; + } + + return 0; +} + +static void cadence_qspi_apb_controller_enable(void) +{ + setbits_le32(&cadence_qspi_base->cfg, CQSPI_REG_CONFIG_ENABLE_MASK); +} + +static void cadence_qspi_apb_controller_disable(void) +{ + clrbits_le32(&cadence_qspi_base->cfg, CQSPI_REG_CONFIG_ENABLE_MASK); +} + +/* Return 1 if idle, otherwise return 0 (busy). */ +static unsigned int cadence_qspi_wait_idle(void) +{ + unsigned int start, count = 0; + /* timeout in unit of ms */ + unsigned int timeout = 5000; + + start = get_timer(0); + for ( ; get_timer(start) < timeout ; ) { + if ((readl(&cadence_qspi_base->cfg) >> + CQSPI_REG_CONFIG_IDLE_LSB) & 0x1) + count++; + else + count = 0; + /* + * Ensure the QSPI controller is in true idle state after + * reading back the same idle status consecutively + */ + if (count >= CQSPI_POLL_IDLE_RETRY) + return 1; + } + + /* Timeout, still in busy mode. */ + printf("QSPI: QSPI is still busy after poll for %d times.\n", + CQSPI_REG_RETRY); + return 0; +} + +static void cadence_qspi_apb_readdata_capture(unsigned int bypass, + unsigned int delay) +{ + unsigned int reg; + cadence_qspi_apb_controller_disable(); + + reg = readl(&cadence_qspi_base->rddatacap); + + if (bypass) + reg |= (1 << CQSPI_REG_RD_DATA_CAPTURE_BYPASS_LSB); + else + reg &= ~(1 << CQSPI_REG_RD_DATA_CAPTURE_BYPASS_LSB); + + reg &= ~(CQSPI_REG_RD_DATA_CAPTURE_DELAY_MASK + << CQSPI_REG_RD_DATA_CAPTURE_DELAY_LSB); + + reg |= ((delay & CQSPI_REG_RD_DATA_CAPTURE_DELAY_MASK) + << CQSPI_REG_RD_DATA_CAPTURE_DELAY_LSB); + + writel(reg, &cadence_qspi_base->rddatacap); + + cadence_qspi_apb_controller_enable(); + return; +} + +static void cadence_qspi_apb_config_baudrate_div(unsigned int ref_clk_hz, + unsigned int sclk_hz) +{ + unsigned int reg; + unsigned int div; + + cadence_qspi_apb_controller_disable(); + reg = readl(&cadence_qspi_base->cfg); + reg &= ~(CQSPI_REG_CONFIG_BAUD_MASK << CQSPI_REG_CONFIG_BAUD_LSB); + + div = ref_clk_hz / sclk_hz; + + if (div > 32) + div = 32; + + /* Check if even number. */ + if ((div & 1)) + div = (div / 2); + else + div = (div / 2) - 1; + + debug("%s: ref_clk %dHz sclk %dHz Div 0x%x\n", __func__, + ref_clk_hz, sclk_hz, div); + + div = (div & CQSPI_REG_CONFIG_BAUD_MASK) << CQSPI_REG_CONFIG_BAUD_LSB; + reg |= div; + writel(reg, &cadence_qspi_base->cfg); + + cadence_qspi_apb_controller_enable(); + return; +} + +static void cadence_qspi_apb_set_clk_mode(unsigned int clk_pol, + unsigned int clk_pha) +{ + unsigned int reg; + + cadence_qspi_apb_controller_disable(); + reg = readl(&cadence_qspi_base->cfg); + reg &= ~(1 << + (CQSPI_REG_CONFIG_CLK_POL_LSB | CQSPI_REG_CONFIG_CLK_PHA_LSB)); + + reg |= ((clk_pol & 0x1) << CQSPI_REG_CONFIG_CLK_POL_LSB); + reg |= ((clk_pha & 0x1) << CQSPI_REG_CONFIG_CLK_PHA_LSB); + + writel(reg, &cadence_qspi_base->cfg); + + cadence_qspi_apb_controller_enable(); + return; +} + +static void cadence_qspi_apb_chipselect(unsigned int chip_select, + unsigned int decoder_enable) +{ + unsigned int reg; + + cadence_qspi_apb_controller_disable(); + + debug("%s : chipselect %d decode %d\n", __func__, chip_select, + decoder_enable); + + reg = readl(&cadence_qspi_base->cfg); + /* docoder */ + if (decoder_enable) + reg |= CQSPI_REG_CONFIG_DECODE_MASK; + else { + reg &= ~CQSPI_REG_CONFIG_DECODE_MASK; + /* Convert CS if without decoder. + * CS0 to 4b'1110 + * CS1 to 4b'1101 + * CS2 to 4b'1011 + * CS3 to 4b'0111 + */ + chip_select = 0xF & ~(1 << chip_select); + } + + reg &= ~(CQSPI_REG_CONFIG_CHIPSELECT_MASK + << CQSPI_REG_CONFIG_CHIPSELECT_LSB); + reg |= (chip_select & CQSPI_REG_CONFIG_CHIPSELECT_MASK) + << CQSPI_REG_CONFIG_CHIPSELECT_LSB; + writel(reg, &cadence_qspi_base->cfg); + + cadence_qspi_apb_controller_enable(); + return; +} + +static void cadence_qspi_apb_delay(unsigned int ref_clk, unsigned int sclk_hz, + unsigned int tshsl_ns, unsigned int tsd2d_ns, + unsigned int tchsh_ns, unsigned int tslch_ns) +{ + unsigned int ref_clk_ns; + unsigned int sclk_ns; + unsigned int tshsl, tchsh, tslch, tsd2d; + unsigned int reg; + + cadence_qspi_apb_controller_disable(); + + /* Convert to ns. */ + ref_clk_ns = (1000000000) / ref_clk; + + /* Convert to ns. */ + sclk_ns = (1000000000) / sclk_hz; + + /* Plus 1 to round up 1 clock cycle. */ + tshsl = CQSPI_CAL_DELAY(tshsl_ns, ref_clk_ns, sclk_ns) + 1; + tchsh = CQSPI_CAL_DELAY(tchsh_ns, ref_clk_ns, sclk_ns) + 1; + tslch = CQSPI_CAL_DELAY(tslch_ns, ref_clk_ns, sclk_ns) + 1; + tsd2d = CQSPI_CAL_DELAY(tsd2d_ns, ref_clk_ns, sclk_ns) + 1; + + reg = ((tshsl & CQSPI_REG_DELAY_TSHSL_MASK) + << CQSPI_REG_DELAY_TSHSL_LSB); + reg |= ((tchsh & CQSPI_REG_DELAY_TCHSH_MASK) + << CQSPI_REG_DELAY_TCHSH_LSB); + reg |= ((tslch & CQSPI_REG_DELAY_TSLCH_MASK) + << CQSPI_REG_DELAY_TSLCH_LSB); + reg |= ((tsd2d & CQSPI_REG_DELAY_TSD2D_MASK) + << CQSPI_REG_DELAY_TSD2D_LSB); + writel(reg, &cadence_qspi_base->delay); + + cadence_qspi_apb_controller_enable(); + return; +} + +static void cadence_qspi_apb_controller_init(void) +{ + unsigned reg; + + cadence_qspi_apb_controller_disable(); + + /* Configure the device size and address bytes */ + reg = readl(&cadence_qspi_base->devsz); + /* Clear the previous value */ + reg &= ~(CQSPI_REG_SIZE_PAGE_MASK << CQSPI_REG_SIZE_PAGE_LSB); + reg &= ~(CQSPI_REG_SIZE_BLOCK_MASK << CQSPI_REG_SIZE_BLOCK_LSB); + reg |= (CONFIG_CQSPI_PAGE_SIZE << CQSPI_REG_SIZE_PAGE_LSB); + reg |= (CONFIG_CQSPI_BLOCK_SIZE << CQSPI_REG_SIZE_BLOCK_LSB); + writel(reg, &cadence_qspi_base->devsz); + + /* Configure the remap address register, no remap */ + writel(0, &cadence_qspi_base->remapaddr); + + /* Disable all interrupts */ + writel(0, &cadence_qspi_base->irqmask); + + cadence_qspi_apb_controller_enable(); + return; +} + +static int cadence_qspi_apb_exec_flash_cmd(unsigned int reg) +{ + unsigned int retry = CQSPI_REG_RETRY; + + /* Write the CMDCTRL without start execution. */ + writel(reg, &cadence_qspi_base->flashcmd); + /* Start execute */ + reg |= CQSPI_REG_CMDCTRL_EXECUTE_MASK; + writel(reg, &cadence_qspi_base->flashcmd); + + while (retry--) { + reg = readl(&cadence_qspi_base->flashcmd); + if ((reg & CQSPI_REG_CMDCTRL_INPROGRESS_MASK) == 0) + break; + udelay(1); + } + + if (!retry) { + printf("QSPI: flash command execution timeout\n"); + return -EIO; + } + + /* Polling QSPI idle status. */ + if (!cadence_qspi_wait_idle()) + return -EIO; + + return 0; +} + +/* For command RDID, RDSR. */ +static int cadence_qspi_apb_command_read(unsigned int cmdlen, const u8 *cmdbuf, + unsigned int rxlen, u8 *rxbuf) +{ + unsigned int reg; + unsigned int read_len; + int status; + + if (!cmdlen || rxlen > CQSPI_STIG_DATA_LEN_MAX || rxbuf == NULL) { + printf("QSPI: Invalid input arguments cmdlen %d " + "rxlen %d\n", cmdlen, rxlen); + return -EINVAL; + } + + reg = cmdbuf[0] << CQSPI_REG_CMDCTRL_OPCODE_LSB; + + reg |= (0x1 << CQSPI_REG_CMDCTRL_RD_EN_LSB); + + /* 0 means 1 byte. */ + reg |= (((rxlen - 1) & CQSPI_REG_CMDCTRL_RD_BYTES_MASK) + << CQSPI_REG_CMDCTRL_RD_BYTES_LSB); + status = cadence_qspi_apb_exec_flash_cmd(reg); + if (status != 0) + return status; + + reg = readl(&cadence_qspi_base->flashcmdrddatalo); + + /* Put the read value into rx_buf */ + read_len = (rxlen > 4) ? 4 : rxlen; + memcpy(rxbuf, ®, read_len); + rxbuf += read_len; + + if (rxlen > 4) { + reg = readl(&cadence_qspi_base->flashcmdrddataup); + + read_len = rxlen - read_len; + memcpy(rxbuf, ®, read_len); + } + return 0; +} + +/* For commands: WRSR, WREN, WRDI, CHIP_ERASE, BE, etc. */ +static int cadence_qspi_apb_command_write(unsigned int cmdlen, + const u8 *cmdbuf, unsigned int txlen, const u8 *txbuf) +{ + unsigned int reg = 0; + unsigned int addr_value; + unsigned int wr_data; + unsigned int wr_len; + + if (!cmdlen || cmdlen > 5 || txlen > 8 || cmdbuf == NULL) { + printf("QSPI: Invalid input arguments cmdlen %d txlen %d\n", + cmdlen, txlen); + return -EINVAL; + } + + reg |= cmdbuf[0] << CQSPI_REG_CMDCTRL_OPCODE_LSB; + + if (cmdlen == 4 || cmdlen == 5) { + /* Command with address */ + reg |= (0x1 << CQSPI_REG_CMDCTRL_ADDR_EN_LSB); + /* Number of bytes to write. */ + reg |= ((cmdlen - 2) & CQSPI_REG_CMDCTRL_ADD_BYTES_MASK) + << CQSPI_REG_CMDCTRL_ADD_BYTES_LSB; + /* Get address */ + addr_value = cadence_qspi_apb_cmd2addr(&cmdbuf[1], + cmdlen >= 5 ? 4 : 3); + + writel(addr_value, &cadence_qspi_base->flashcmdaddr); + } + + if (txlen) { + /* writing data = yes */ + reg |= (0x1 << CQSPI_REG_CMDCTRL_WR_EN_LSB); + reg |= ((txlen - 1) & CQSPI_REG_CMDCTRL_WR_BYTES_MASK) + << CQSPI_REG_CMDCTRL_WR_BYTES_LSB; + + wr_len = txlen > 4 ? 4 : txlen; + memcpy(&wr_data, txbuf, wr_len); + writel(wr_data, &cadence_qspi_base->flashcmdwrdatalo); + + if (txlen > 4) { + txbuf += wr_len; + wr_len = txlen - wr_len; + memcpy(&wr_data, txbuf, wr_len); + writel(wr_data, &cadence_qspi_base->flashcmdwrdataup); + } + } + + /* Execute the command */ + return cadence_qspi_apb_exec_flash_cmd(reg); +} + +/* Opcode + Address (3/4 bytes) + dummy bytes (0-4 bytes) */ +static int cadence_qspi_apb_indirect_read_setup(unsigned int ahb_phy_addr, + unsigned int cmdlen, const u8 *cmdbuf) +{ + unsigned int reg; + unsigned int rd_reg; + unsigned int addr_value; + unsigned int dummy_clk; + unsigned int dummy_bytes; + unsigned int addr_bytes; + + /* + * Identify addr_byte. All NOR flash device drivers are using fast read + * which always expecting 1 dummy byte, 1 cmd byte and 3/4 addr byte. + * With that, the length is in value of 5 or 6. Only FRAM chip from + * ramtron using normal read (which won't need dummy byte). + * Unlikely NOR flash using normal read due to performance issue. + */ + if (cmdlen >= 5) + /* to cater fast read where cmd + addr + dummy */ + addr_bytes = cmdlen - 2; + else + /* for normal read (only ramtron as of now) */ + addr_bytes = cmdlen - 1; + + /* Setup the indirect trigger address */ + writel((ahb_phy_addr & CQSPI_INDIRECTTRIGGER_ADDR_MASK), + &cadence_qspi_base->indaddrtrig); + + /* Configure SRAM partition for read. */ + writel(CQSPI_REG_SRAM_PARTITION_RD, &cadence_qspi_base->srampart); + + /* Configure the opcode */ + rd_reg = cmdbuf[0] << CQSPI_REG_RD_INSTR_OPCODE_LSB; + +#if (CONFIG_SPI_FLASH_QUAD == 1) + /* Instruction and address at DQ0, data at DQ0-3. */ + rd_reg |= CQSPI_INST_TYPE_QUAD << CQSPI_REG_RD_INSTR_TYPE_DATA_LSB; +#endif + + /* Get address */ + addr_value = cadence_qspi_apb_cmd2addr(&cmdbuf[1], addr_bytes); + writel(addr_value, &cadence_qspi_base->indrdstaddr); + + /* The remaining lenght is dummy bytes. */ + dummy_bytes = cmdlen - addr_bytes - 1; + if (dummy_bytes) { + + if (dummy_bytes > CQSPI_DUMMY_BYTES_MAX) + dummy_bytes = CQSPI_DUMMY_BYTES_MAX; + + rd_reg |= (1 << CQSPI_REG_RD_INSTR_MODE_EN_LSB); +#if defined(CONFIG_SPL_SPI_XIP) && defined(CONFIG_SPL_BUILD) + writel(0x0, &cadence_qspi_base->modebit); +#else + writel(0xFF, &cadence_qspi_base->modebit); +#endif + + /* Convert to clock cycles. */ + dummy_clk = dummy_bytes * CQSPI_DUMMY_CLKS_PER_BYTE; + /* Need to minus the mode byte (8 clocks). */ + dummy_clk -= CQSPI_DUMMY_CLKS_PER_BYTE; + + if (dummy_clk) + rd_reg |= (dummy_clk & CQSPI_REG_RD_INSTR_DUMMY_MASK) + << CQSPI_REG_RD_INSTR_DUMMY_LSB; + } + + writel(rd_reg, &cadence_qspi_base->devrd); + + /* set device size */ + reg = readl(&cadence_qspi_base->devsz); + reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK; + reg |= (addr_bytes - 1); + writel(reg, &cadence_qspi_base->devsz); + return 0; +} + +static int cadence_qspi_apb_indirect_read_execute(void *ahb_base_addr, + unsigned int rxlen, u8 *rxbuf) +{ + unsigned int reg; + + writel(rxlen, &cadence_qspi_base->indrdcnt); + + /* Start the indirect read transfer */ + writel(CQSPI_REG_INDIRECTRD_START_MASK, + &cadence_qspi_base->indrd); + + if (qspi_read_sram_fifo_poll((void *)rxbuf, + (const void *)ahb_base_addr, rxlen)) { + goto failrd; + } + + /* Check flash indirect controller */ + reg = readl(&cadence_qspi_base->indrd); + if (!(reg & CQSPI_REG_INDIRECTRD_DONE_MASK)) { + reg = readl(&cadence_qspi_base->indrd); + printf("QSPI: indirect completion status " + "error with reg 0x%08x\n", reg); + goto failrd; + } + + /* Clear indirect completion status */ + writel(CQSPI_REG_INDIRECTRD_DONE_MASK, &cadence_qspi_base->indrd); + return 0; + +failrd: + /* Cancel the indirect read */ + writel(CQSPI_REG_INDIRECTRD_CANCEL_MASK, &cadence_qspi_base->indrd); + return -1; +} + +/* Opcode + Address (3/4 bytes) */ +static int cadence_qspi_apb_indirect_write_setup(unsigned int ahb_phy_addr, + unsigned int cmdlen, const u8 *cmdbuf) +{ + unsigned int reg; + unsigned int addr_bytes = cmdlen > 4 ? 4 : 3; + + if (cmdlen < 4 || cmdbuf == NULL) { + printf("QSPI: iInvalid input argument, len %d cmdbuf 0x%08x\n", + cmdlen, (unsigned int)cmdbuf); + return -EINVAL; + } + /* Setup the indirect trigger address */ + writel((ahb_phy_addr & CQSPI_INDIRECTTRIGGER_ADDR_MASK), + &cadence_qspi_base->indaddrtrig); + + writel(CQSPI_REG_SRAM_PARTITION_WR, + &cadence_qspi_base->srampart); + + /* Configure the opcode */ + reg = cmdbuf[0] << CQSPI_REG_WR_INSTR_OPCODE_LSB; + writel(reg, &cadence_qspi_base->devwr); + + /* Setup write address. */ + reg = cadence_qspi_apb_cmd2addr(&cmdbuf[1], addr_bytes); + writel(reg, &cadence_qspi_base->indwrstaddr); + + reg = readl(&cadence_qspi_base->devsz); + reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK; + reg |= (addr_bytes - 1); + writel(reg, &cadence_qspi_base->devsz); + return 0; +} + +static int cadence_qspi_apb_indirect_write_execute(void *ahb_base_addr, + unsigned int txlen, const u8 *txbuf) +{ + unsigned int reg = 0; + unsigned int retry; + + /* Configure the indirect read transfer bytes */ + writel(txlen, &cadence_qspi_base->indwrcnt); + + /* Start the indirect write transfer */ + writel(CQSPI_REG_INDIRECTWR_START_MASK, &cadence_qspi_base->indwr); + + if (qpsi_write_sram_fifo_push(ahb_base_addr, + (const void *)txbuf, txlen)) { + goto failwr; + } + + /* Wait until last write is completed (FIFO empty) */ + retry = CQSPI_REG_RETRY; + while (retry--) { + reg = CQSPI_GET_WR_SRAM_LEVEL(); + if (reg == 0) + break; + + udelay(1); + } + if (reg != 0) { + printf("QSPI: timeout for indirect write\n"); + goto failwr; + } + + /* Check flash indirect controller status */ + retry = CQSPI_REG_RETRY; + while (retry--) { + reg = readl(&cadence_qspi_base->indwr); + if (reg & CQSPI_REG_INDIRECTWR_DONE_MASK) + break; + udelay(1); + } + if (!(reg & CQSPI_REG_INDIRECTWR_DONE_MASK)) { + printf("QSPI: indirect completion " + "status error with reg 0x%08x\n", reg); + goto failwr; + } + + /* Clear indirect completion status */ + writel(CQSPI_REG_INDIRECTWR_DONE_MASK, &cadence_qspi_base->indwr); + return 0; + +failwr: + /* Cancel the indirect write */ + writel(CQSPI_REG_INDIRECTWR_CANCEL_MASK, &cadence_qspi_base->indwr); + return -1; +} + +static void cadence_qspi_apb_enter_xip(char xip_dummy) +{ + unsigned int reg; + + /* enter XiP mode immediately and enable direct mode */ + reg = readl(&cadence_qspi_base->cfg); + reg |= CQSPI_REG_CONFIG_ENABLE_MASK; + reg |= CQSPI_REG_CONFIG_DIRECT_MASK; + reg |= CQSPI_REG_CONFIG_XIP_IMM_MASK; + writel(reg, &cadence_qspi_base->cfg); + + /* keep the XiP mode */ + writel(xip_dummy, &cadence_qspi_base->modebit); + + /* Enable mode bit at devrd */ + reg = readl(&cadence_qspi_base->devrd); + reg |= (1 << CQSPI_REG_RD_INSTR_MODE_EN_LSB); + writel(reg, &cadence_qspi_base->devrd); +} + +void spi_set_speed(struct spi_slave *slave, uint hz) +{ + cadence_qspi_apb_config_baudrate_div(CONFIG_CQSPI_REF_CLK, hz); + + /* Reconfigure delay timing if speed is changed. */ + cadence_qspi_apb_delay(CONFIG_CQSPI_REF_CLK, hz, + CONFIG_CQSPI_TSHSL_NS, CONFIG_CQSPI_TSD2D_NS, + CONFIG_CQSPI_TCHSH_NS, CONFIG_CQSPI_TSLCH_NS); + return; +} + +/* calibration sequence to determine the read data capture delay register */ +int spi_calibration(struct spi_slave *slave) +{ + struct cadence_qspi_slave *cadence_qspi = to_cadence_qspi_slave(slave); + u8 opcode_rdid = 0x9F; + unsigned int idcode = 0, temp = 0; + int err = 0, i, range_lo = -1, range_hi = -1; + + /* start with slowest clock (1 MHz) */ + spi_set_speed(slave, 1000000); + + /* configure the read data capture delay register to 0 */ + cadence_qspi_apb_readdata_capture(1, 0); + + /* Enable QSPI */ + cadence_qspi_apb_controller_enable(); + + /* read the ID which will be our golden value */ + err = cadence_qspi_apb_command_read(1, &opcode_rdid, + 3, (u8 *)&idcode); + if (err) { + puts("SF: Calibration failed (read)\n"); + return err; + } + + /* use back the intended clock and find low range */ + spi_set_speed(slave, cadence_qspi->max_hz); + for (i = 0; i < CQSPI_READ_CAPTURE_MAX_DELAY; i++) { + /* Disable QSPI */ + cadence_qspi_apb_controller_disable(); + + /* reconfigure the read data capture delay register */ + cadence_qspi_apb_readdata_capture(1, i); + + /* Enable back QSPI */ + cadence_qspi_apb_controller_enable(); + + /* issue a RDID to get the ID value */ + err = cadence_qspi_apb_command_read(1, &opcode_rdid, + 3, (u8 *)&temp); + if (err) { + puts("SF: Calibration failed (read)\n"); + return err; + } + + /* search for range lo */ + if (range_lo == -1 && temp == idcode) { + range_lo = i; + continue; + } + + /* search for range hi */ + if (range_lo != -1 && temp != idcode) { + range_hi = i - 1; + break; + } + range_hi = i; + } + + if (range_lo == -1) { + puts("SF: Calibration failed (low range)\n"); + return err; + } + + /* Disable QSPI for subsequent initialization */ + cadence_qspi_apb_controller_disable(); + + /* configure the final value for read data capture delay register */ + cadence_qspi_apb_readdata_capture(1, (range_hi + range_lo) / 2); + printf("SF: Read data capture delay calibrated to %i (%i - %i)\n", + (range_hi + range_lo) / 2, range_lo, range_hi); + + /* just to ensure we do once only when speed or chip select change */ + qspi_calibrated_hz = cadence_qspi->max_hz; + qspi_calibrated_cs = slave->cs; + return 0; +} + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ +#if (CONFIG_CQSPI_DECODER == 1) + if (((cs >= 0) && (cs < CQSPI_DECODER_MAX_CS)) && ((bus >= 0) && + (bus < CQSPI_DECODER_MAX_CS))) { + return 1; + } +#else + if (((cs >= 0) && (cs < CQSPI_NO_DECODER_MAX_CS)) && + ((bus >= 0) && (bus < CQSPI_NO_DECODER_MAX_CS))) { + return 1; + } +#endif + printf("QSPI: Invalid bus or cs. Bus %d cs %d\n", bus, cs); + return 0; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + return; +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + return; +} + +void spi_init(void) +{ + cadence_qspi_apb_controller_init(); + qspi_is_init = 1; + return; +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct cadence_qspi_slave *cadence_qspi; + + debug("%s: bus %d cs %d max_hz %dMHz mode %d\n", __func__, + bus, cs, max_hz/1000000, mode); + + if (!spi_cs_is_valid(bus, cs)) + return NULL; + + cadence_qspi = malloc(sizeof(struct cadence_qspi_slave)); + if (!cadence_qspi) { + printf("QSPI: Can't allocate struct cadence_qspi_slave. " + "Bus %d cs %d\n", bus, cs); + return NULL; + } + + cadence_qspi->slave.bus = bus; + cadence_qspi->slave.cs = cs; + cadence_qspi->mode = mode; + cadence_qspi->max_hz = max_hz; + cadence_qspi->regbase = (void *)QSPI_BASE; + cadence_qspi->ahbbase = (void *)QSPI_AHB_BASE; + + if (!qspi_is_init) + spi_init(); + + return &cadence_qspi->slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + struct cadence_qspi_slave *cadence_qspi = to_cadence_qspi_slave(slave); + free(cadence_qspi); + return; +} + +int spi_claim_bus(struct spi_slave *slave) +{ + struct cadence_qspi_slave *cadence_qspi = to_cadence_qspi_slave(slave); + unsigned int clk_pol = (cadence_qspi->mode & SPI_CPOL) ? 1 : 0; + unsigned int clk_pha = (cadence_qspi->mode & SPI_CPHA) ? 1 : 0; + int err = 0; + + debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); + + /* Disable QSPI */ + cadence_qspi_apb_controller_disable(); + + /* Set Chip select */ + cadence_qspi_apb_chipselect(slave->cs, CONFIG_CQSPI_DECODER); + + /* Set SPI mode */ + cadence_qspi_apb_set_clk_mode(clk_pol, clk_pha); + + /* Set clock speed */ + spi_set_speed(slave, cadence_qspi->max_hz); + + /* calibration required for different SCLK speed or chip select */ + if (qspi_calibrated_hz != cadence_qspi->max_hz || + qspi_calibrated_cs != slave->cs) { + err = spi_calibration(slave); + if (err) + return err; + } + + /* Enable QSPI */ + cadence_qspi_apb_controller_enable(); + + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + return; +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, + void *data_in, unsigned long flags) +{ + struct cadence_qspi_slave *cadence_qspi = to_cadence_qspi_slave(slave); + void *ahbbase = cadence_qspi->ahbbase; + u8 *cmd_buf = cadence_qspi->cmd_buf; + size_t data_bytes; + int err = 0; + u32 mode = CQSPI_STIG_WRITE; + + if (flags & SPI_XFER_BEGIN) { + /* copy command to local buffer */ + cadence_qspi->cmd_len = bitlen / 8; + memcpy(cmd_buf, data_out, cadence_qspi->cmd_len); + } + + if (flags == (SPI_XFER_BEGIN | SPI_XFER_END)) { + /* if start and end bit are set, the data bytes is 0. */ + data_bytes = 0; + } else { + data_bytes = bitlen / 8; + } + + if ((flags & SPI_XFER_END) || (flags == 0)) { + if (cadence_qspi->cmd_len == 0) { + printf("QSPI: Error, command is empty.\n"); + return -1; + } + + if (data_in && data_bytes) { + /* read */ + /* Use STIG if no address. */ + if (!CQSPI_IS_ADDR(cadence_qspi->cmd_len)) + mode = CQSPI_STIG_READ; + else + mode = CQSPI_INDIRECT_READ; + } else if (data_out && !(flags & SPI_XFER_BEGIN)) { + /* write */ + if (!CQSPI_IS_ADDR(cadence_qspi->cmd_len)) + mode = CQSPI_STIG_WRITE; + else + mode = CQSPI_INDIRECT_WRITE; + } + + switch (mode) { + case CQSPI_STIG_READ: + err = cadence_qspi_apb_command_read( + cadence_qspi->cmd_len, cmd_buf, + data_bytes, data_in); + + break; + case CQSPI_STIG_WRITE: + err = cadence_qspi_apb_command_write( + cadence_qspi->cmd_len, cmd_buf, + data_bytes, data_out); + break; + case CQSPI_INDIRECT_READ: + err = cadence_qspi_apb_indirect_read_setup( + QSPI_AHB_BASE, + cadence_qspi->cmd_len, cmd_buf); + if (!err) { + err = cadence_qspi_apb_indirect_read_execute + (ahbbase, data_bytes, data_in); + } + break; + case CQSPI_INDIRECT_WRITE: + err = cadence_qspi_apb_indirect_write_setup + (QSPI_AHB_BASE, + cadence_qspi->cmd_len, cmd_buf); + if (!err) { + err = cadence_qspi_apb_indirect_write_execute + (ahbbase, data_bytes, data_out); + } + break; + default: + err = -1; + break; + } + + if (flags & SPI_XFER_END) { + /* clear command buffer */ + memset(cmd_buf, 0, sizeof(cadence_qspi->cmd_buf)); + cadence_qspi->cmd_len = 0; + } + } + return err; +} + +void spi_enter_xip(struct spi_slave *slave, char xip_dummy) +{ + /* Enter XiP */ + cadence_qspi_apb_enter_xip(xip_dummy); + return; +} + + diff --git a/drivers/spi/cadence_qspi.h b/drivers/spi/cadence_qspi.h new file mode 100644 index 0000000..346837e --- /dev/null +++ b/drivers/spi/cadence_qspi.h @@ -0,0 +1,196 @@ +/* + * (C) Copyright 2014 Altera Corporation <www.altera.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CADENCE_QSPI_H__ +#define __CADENCE_QSPI_H__ + +/* + * Macro required for this driver + * + * #define CONFIG_CQSPI_BASE (SOCFPGA_QSPIREGS_ADDRESS) + * #define CONFIG_CQSPI_AHB_BASE (SOCFPGA_QSPIDATA_ADDRESS) + * -> To specify base address for controller CSR base and AHB data base addr + * + * #define CONFIG_CQSPI_REF_CLK (400000000) + * -> The clock frequency supplied from PLL to the QSPI controller + * + * #define CONFIG_CQSPI_PAGE_SIZE (256) + * -> To define the page size of serial flash in bytes + * + * #define CONFIG_CQSPI_BLOCK_SIZE (16) + * -> To define the block size of serial flash in pages + * + * #define CONFIG_CQSPI_DECODER (0) + * -> To enable the 4-to-16 decoder which enable up to 16 serial flash devices + * + * #define CONFIG_CQSPI_TSHSL_NS (200) + * #define CONFIG_CQSPI_TSD2D_NS (255) + * #define CONFIG_CQSPI_TCHSH_NS (20) + * #define CONFIG_CQSPI_TSLCH_NS (20) + * -> Configure controller based on serial flash device timing characteristic + */ + +#define QSPI_BASE (CONFIG_CQSPI_BASE) +#define QSPI_AHB_BASE (CONFIG_CQSPI_AHB_BASE) +#define CQSPI_IS_ADDR(cmd_len) (cmd_len > 1 ? 1 : 0) + +struct cadence_qspi_slave { + struct spi_slave slave; + unsigned int mode; + unsigned int max_hz; + void *regbase; + void *ahbbase; + size_t cmd_len; + u8 cmd_buf[32]; + size_t data_len; +}; + +struct cadence_qspi { + u32 cfg; + u32 devrd; + u32 devwr; + u32 delay; + u32 rddatacap; + u32 devsz; + u32 srampart; + u32 indaddrtrig; + u32 dmaper; + u32 remapaddr; + u32 modebit; + u32 sramfill; + u32 txthresh; + u32 rxthresh; + u32 _pad_0x38_0x3f[2]; + u32 irqstat; + u32 irqmask; + u32 _pad_0x48_0x4f[2]; + u32 lowwrprot; + u32 uppwrprot; + u32 wrprot; + u32 _pad_0x5c_0x5f; + u32 indrd; + u32 indrdwater; + u32 indrdstaddr; + u32 indrdcnt; + u32 indwr; + u32 indwrwater; + u32 indwrstaddr; + u32 indwrcnt; + u32 _pad_0x80_0x8f[4]; + u32 flashcmd; + u32 flashcmdaddr; + u32 _pad_0x98_0x9f[2]; + u32 flashcmdrddatalo; + u32 flashcmdrddataup; + u32 flashcmdwrdatalo; + u32 flashcmdwrdataup; + u32 _pad_0xb0_0xfb[19]; + u32 moduleid; +}; + +/* Controller's configuration and status register */ +#define CQSPI_REG_CONFIG_CLK_POL_LSB 1 +#define CQSPI_REG_CONFIG_CLK_PHA_LSB 2 +#define CQSPI_REG_CONFIG_ENABLE_MASK (1 << 0) +#define CQSPI_REG_CONFIG_DIRECT_MASK (1 << 7) +#define CQSPI_REG_CONFIG_DECODE_MASK (1 << 9) +#define CQSPI_REG_CONFIG_XIP_IMM_MASK (1 << 18) +#define CQSPI_REG_CONFIG_CHIPSELECT_LSB 10 +#define CQSPI_REG_CONFIG_BAUD_LSB 19 +#define CQSPI_REG_CONFIG_IDLE_LSB 31 +#define CQSPI_REG_CONFIG_CHIPSELECT_MASK 0xF +#define CQSPI_REG_CONFIG_BAUD_MASK 0xF +#define CQSPI_REG_RD_INSTR_OPCODE_LSB 0 +#define CQSPI_REG_RD_INSTR_TYPE_INSTR_LSB 8 +#define CQSPI_REG_RD_INSTR_TYPE_ADDR_LSB 12 +#define CQSPI_REG_RD_INSTR_TYPE_DATA_LSB 16 +#define CQSPI_REG_RD_INSTR_MODE_EN_LSB 20 +#define CQSPI_REG_RD_INSTR_DUMMY_LSB 24 +#define CQSPI_REG_RD_INSTR_TYPE_INSTR_MASK 0x3 +#define CQSPI_REG_RD_INSTR_TYPE_ADDR_MASK 0x3 +#define CQSPI_REG_RD_INSTR_TYPE_DATA_MASK 0x3 +#define CQSPI_REG_RD_INSTR_DUMMY_MASK 0x1F +#define CQSPI_REG_WR_INSTR_OPCODE_LSB 0 +#define CQSPI_REG_DELAY_TSLCH_LSB 0 +#define CQSPI_REG_DELAY_TCHSH_LSB 8 +#define CQSPI_REG_DELAY_TSD2D_LSB 16 +#define CQSPI_REG_DELAY_TSHSL_LSB 24 +#define CQSPI_REG_DELAY_TSLCH_MASK 0xFF +#define CQSPI_REG_DELAY_TCHSH_MASK 0xFF +#define CQSPI_REG_DELAY_TSD2D_MASK 0xFF +#define CQSPI_REG_DELAY_TSHSL_MASK 0xFF +#define CQSPI_REG_RD_DATA_CAPTURE_BYPASS_LSB 0 +#define CQSPI_REG_RD_DATA_CAPTURE_DELAY_LSB 1 +#define CQSPI_REG_RD_DATA_CAPTURE_DELAY_MASK 0xF +#define CQSPI_REG_SIZE_ADDRESS_LSB 0 +#define CQSPI_REG_SIZE_PAGE_LSB 4 +#define CQSPI_REG_SIZE_BLOCK_LSB 16 +#define CQSPI_REG_SIZE_ADDRESS_MASK 0xF +#define CQSPI_REG_SIZE_PAGE_MASK 0xFFF +#define CQSPI_REG_SIZE_BLOCK_MASK 0x3F +#define CQSPI_REG_SRAMLEVEL_RD_LSB 0 +#define CQSPI_REG_SRAMLEVEL_WR_LSB 16 +#define CQSPI_REG_SRAMLEVEL_RD_MASK 0xFFFF +#define CQSPI_REG_SRAMLEVEL_WR_MASK 0xFFFF +#define CQSPI_REG_INDIRECTRD_START_MASK (1 << 0) +#define CQSPI_REG_INDIRECTRD_CANCEL_MASK (1 << 1) +#define CQSPI_REG_INDIRECTRD_INPROGRESS_MASK (1 << 2) +#define CQSPI_REG_INDIRECTRD_DONE_MASK (1 << 5) +#define CQSPI_REG_CMDCTRL_EXECUTE_MASK (1 << 0) +#define CQSPI_REG_CMDCTRL_INPROGRESS_MASK (1 << 1) +#define CQSPI_REG_CMDCTRL_DUMMY_LSB 7 +#define CQSPI_REG_CMDCTRL_WR_BYTES_LSB 12 +#define CQSPI_REG_CMDCTRL_WR_EN_LSB 15 +#define CQSPI_REG_CMDCTRL_ADD_BYTES_LSB 16 +#define CQSPI_REG_CMDCTRL_ADDR_EN_LSB 19 +#define CQSPI_REG_CMDCTRL_RD_BYTES_LSB 20 +#define CQSPI_REG_CMDCTRL_RD_EN_LSB 23 +#define CQSPI_REG_CMDCTRL_OPCODE_LSB 24 +#define CQSPI_REG_CMDCTRL_DUMMY_MASK 0x1F +#define CQSPI_REG_CMDCTRL_WR_BYTES_MASK 0x7 +#define CQSPI_REG_CMDCTRL_ADD_BYTES_MASK 0x3 +#define CQSPI_REG_CMDCTRL_RD_BYTES_MASK 0x7 +#define CQSPI_REG_CMDCTRL_OPCODE_MASK 0xFF +#define CQSPI_REG_INDIRECTWR_START_MASK (1 << 0) +#define CQSPI_REG_INDIRECTWR_CANCEL_MASK (1 << 1) +#define CQSPI_REG_INDIRECTWR_INPROGRESS_MASK (1 << 2) +#define CQSPI_REG_INDIRECTWR_DONE_MASK (1 << 5) + +/* Transfer type */ +#define CQSPI_STIG_READ 0 +#define CQSPI_STIG_WRITE 1 +#define CQSPI_INDIRECT_READ 2 +#define CQSPI_INDIRECT_WRITE 3 + +/* Transfer mode */ +#define CQSPI_INST_TYPE_SINGLE (0) +#define CQSPI_INST_TYPE_DUAL (1) +#define CQSPI_INST_TYPE_QUAD (2) + +/* controller operation setting */ +#define CQSPI_NO_DECODER_MAX_CS (4) +#define CQSPI_DECODER_MAX_CS (16) +#define CQSPI_READ_CAPTURE_MAX_DELAY (16) +#define CQSPI_REG_POLL_US (1) +#define CQSPI_REG_RETRY (10000) +#define CQSPI_POLL_IDLE_RETRY (3) +#define CQSPI_FIFO_WIDTH (4) +#define CQSPI_STIG_DATA_LEN_MAX (8) +#define CQSPI_INDIRECTTRIGGER_ADDR_MASK (0xFFFFF) +#define CQSPI_DUMMY_CLKS_PER_BYTE (8) +#define CQSPI_DUMMY_BYTES_MAX (4) + +/* Controller sram size in word */ +#define CQSPI_REG_SRAM_SIZE_WORD (128) +#define CQSPI_REG_SRAM_RESV_WORDS (2) +#define CQSPI_REG_SRAM_PARTITION_WR (1) +#define CQSPI_REG_SRAM_PARTITION_RD \ + (CQSPI_REG_SRAM_SIZE_WORD - CQSPI_REG_SRAM_RESV_WORDS) +#define CQSPI_REG_SRAM_THRESHOLD_WORDS (50) +#define CQSPI_REG_SRAM_FILL_THRESHOLD \ + ((CQSPI_REG_SRAM_SIZE_WORD / 2) * CQSPI_FIFO_WIDTH) + +#endif /* __CADENCE_QSPI_H__ */