Hi Stefano,

On Mon, Aug 31, 2015 at 07:05:10PM +0200, Stefano Babic wrote:

On 31/08/2015 18:57, Stefano Babic wrote:

...

On 26/08/2015 09:40, Peng Fan wrote:

...

There is a hole in shadow registers address map of size 0x100 between bank 5 and bank 6 on iMX6QP, iMX6DQ, iMX6SDL, iMX6SX and iMX6UL. Bank 5 ends at 0x6F0 and Bank 6 starts at 0x800. When reading the fuses, we should account for this hole in address space.

Similar hole exists between bank 14 and bank 15 of size 0x80 on iMX6QP, iMX6DQ, iMX6SDL and iMX6SX. Note: iMX6SL has only 0-7 banks and there is no hole. Note: iMX6UL doesn't have this one.

When reading, we use register offset, so need to account for holes to get the correct address. When writing, we use bank/word index, there is no need to account for holes, always use bank/word index from fuse map.

Signed-off-by: Peng Fan Peng.Fan@freescale.com Cc: Stefano Babic sbabic@denx.de Cc: Fabio Estevam fabio.estevam@freescale.com

---

Changes v2: Discard is_cpu_type(MXC_CPU_MX7D), since 7D cpu type is still not upstreamed.

arch/arm/include/asm/arch-mx6/imx-regs.h | 3 +- drivers/misc/mxc_ocotp.c | 78 ++++++++++++++++++++++++++++++-- 2 files changed, 75 insertions(+), 6 deletions(-)

diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 4d84a9b..a685ed2 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -630,9 +630,10 @@ struct ocotp_regs { u32 version; u32 rsvd7[0xdb];

• /* fuse banks */ struct fuse_bank { u32 fuse_regs[0x20];

• } bank[16];

• } bank[0];

};

struct fuse_bank0_regs { diff --git a/drivers/misc/mxc_ocotp.c b/drivers/misc/mxc_ocotp.c index d9b02c7..65ff815 100644 --- a/drivers/misc/mxc_ocotp.c +++ b/drivers/misc/mxc_ocotp.c @@ -57,6 +57,68 @@

#define WRITE_POSTAMBLE_US 2

+#if defined(CONFIG_MX6) || defined(CONFIG_VF610) +#define FUSE_BANK_SIZE 0x80 +#ifdef CONFIG_MX6SL +#define FUSE_BANKS 8 +#else +#define FUSE_BANKS 16 +#endif +#elif defined CONFIG_MX7 +#define FUSE_BANK_SIZE 0x40 +#define FUSE_BANKS 16 +#else +#error "Unsupported architecture\n" +#endif

+#if defined(CONFIG_MX6) +#include <asm/arch/sys_proto.h>

+/*

• • There is a hole in shadow registers address map of size 0x100
• • between bank 5 and bank 6 on iMX6QP, iMX6DQ, iMX6SDL, iMX6SX and iMX6UL.
• • Bank 5 ends at 0x6F0 and Bank 6 starts at 0x800. When reading the fuses,
• • we should account for this hole in address space.
• • Similar hole exists between bank 14 and bank 15 of size
• • 0x80 on iMX6QP, iMX6DQ, iMX6SDL and iMX6SX.
• • Note: iMX6SL has only 0-7 banks and there is no hole.
• • Note: iMX6UL doesn't have this one.
• • This function is to covert user input to physical bank index.
• • Only needed when read fuse, because we use register offset, so
• • need to calculate real register offset.
• • When write, no need to consider hole, always use the bank/word
• • index from fuse map.
• */

+u32 fuse_bank_physical(int index) +{

• u32 phy_index;
• if (is_cpu_type(MXC_CPU_MX6SL)) {

• phy_index = index;
  

• } else if (is_cpu_type(MXC_CPU_MX6UL)) {

• if (index >= 6)
  

• 	phy_index = fuse_bank_physical(5) + (index - 6) + 3;
  

• else
  

• 	phy_index = index;
  

• } else {

• if (index >= 15)
  

• 	phy_index = fuse_bank_physical(14) + (index - 15) + 2;
  

• else if (index >= 6)
  

• 	phy_index = fuse_bank_physical(5) + (index - 6) + 3;
  

• else
  

• 	phy_index = index;
  

• }
• return phy_index;

+} +#else +u32 fuse_bank_physical(int index) +{

• return index;

+} +#endif

static void wait_busy(struct ocotp_regs *regs, unsigned int delay_us) { while (readl(&regs->ctrl) & BM_CTRL_BUSY) @@ -73,9 +135,9 @@ static int prepare_access(struct ocotp_regs **regs, u32 bank, u32 word, { *regs = (struct ocotp_regs *)OCOTP_BASE_ADDR;

• if (bank >= ARRAY_SIZE((*regs)->bank) ||

• 	word >= ARRAY_SIZE((*regs)->bank[0].fuse_regs) >> 2 ||
  

• 	!assert) {
  

• if (bank >= FUSE_BANKS ||

•    word >= ARRAY_SIZE((*regs)->bank[0].fuse_regs) >> 2 ||
  

•    !assert) {
  

  printf("mxc_ocotp %s(): Invalid argument\n", caller); return -EINVAL; }

@@ -113,12 +175,15 @@ int fuse_read(u32 bank, u32 word, u32 *val) { struct ocotp_regs *regs; int ret;

• u32 phy_bank;

  ret = prepare_read(&regs, bank, word, val, __func__); if (ret) return ret;

• *val = readl(&regs->bank[bank].fuse_regs[word << 2]);

• phy_bank = fuse_bank_physical(bank);

• *val = readl(&regs->bank[phy_bank].fuse_regs[word << 2]);

  return finish_access(regspeng, __func__);

} @@ -259,12 +324,15 @@ int fuse_override(u32 bank, u32 word, u32 val) { struct ocotp_regs *regs; int ret;

• u32 phy_bank;

  ret = prepare_write(&regs, bank, word, __func__); if (ret) return ret;

• writel(val, &regs->bank[bank].fuse_regs[word << 2]);

• phy_bank = fuse_bank_physical(bank);

• writel(val, &regs->bank[phy_bank].fuse_regs[word << 2]);

  return finish_access(regs, __func__);

}

Applied to u-boot-imx, thanks !

Sorry, it is not. It lokks like this breaks mx6 boards. Can you take a look, please ?

The is_cpu_type only effects on mx6.

I applied this following patch: https://patchwork.ozlabs.org/patch/512669/

MAKEALL -s mx6 and MAKEALL -s vf610 does not trigger build errors.

Regards, Peng.

Best regards, Stefano Babic

--

DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de =====================================================================

--