Hello Jagan,
Am 17.10.2013 12:43, schrieb Jagan Teki:
Hi Michael,
On Wed, Oct 16, 2013 at 1:28 PM, Heiko Schocherhs@denx.de wrote:
Hello Michael,
Am 15.10.2013 22:23, schrieb Michael Burr:
This series of two patches contains improvements for the I2C driver on the Xilinx Zynq architecture. In general, the goals are:
Support for both I2C bus masters ("I2C0" and "I2C1") in the Zynq PS. Full support for bus multiplexers. Support for all register-address sizes (0, 1, 2).
The changes to file 'zynq_i2c.c' in this patch series are meant to be applied in order: in other words, first apply the changes from the PATCH 1/2 version; then apply the changes in the PATCH 2/2 version.
v3: fixed mistake parsing PATCH 1/2 v4: _really_ fixed this time! v5: yet another try v6: one more time v7: again v8: last time (see comments in PATCH 1/2)
? I am lost in space now ... you are sure this is the finally version? Really tested? I have no chance to test your changes ...
Just confused this style of sending patches. Anyway I have tested on these on zynq boards, works fine.
Thanks for testing!
bye, Heiko