Hi Maxim,
On 9 September 2016 at 15:53, Maxim Sloyko maxims@google.com wrote:
Hi all,
First, disclaimer: this is the first time I'm doing something with U-Boot or the part (ast2500), so any claim I make below can be false or just plain nonsense.
Welcome!
I'm working on expanding support of Aspeed ast2500 part in U-Boot.
I ran into some problems, when I tried to use Linux Kernel device tree for this part in U-Boot. Looking at diagnostic messages (http://pastebin.ca/3713876) I figured out that the problem is that U-Boot continues to use malloc_simple, even after it has been relocated to RAM. As a result, it fails to allocate 130k needed for environment, because it is larger than the configured size of a memory chunk for simple malloc.
The test for this is in dlmalloc.c - the GD_FLG_FULL_MALLOC_INIT flag. The flag is set in initr_reloc() after relocation.
I wonder if your global_data (the 'gd' pointer) is not set up correctly, so it cannot write to the flag.
What version of U-Boot is it? Is the tree available somewhere?
I suspect that this has something to do with memory configuration, do you know what I may be missing? Also, it looks like lowlevel_init has been called twice, i.e. again after relocation -- is this expected? This might be what is causing the problem, because lowlevel_init does a lot of RAM related configuration, but I don't know what to do about it.
I would expect lowlevel_init() to be called only once (or perhaps once in SPL and once in U-Boot proper).
There is some very basic support for this part in U-Boot, provided by manufacturer, but it is basically a single platform.S assembly file that does everything, like RAM configuration and some other peripherals support in lowlevel_init procedure.
So, if I want to add proper support for this part, i.e. with device tree and all, is there a way to make this a gradual process? I mean, is it possible to leave existing RAM initialization procedure in lowlevel_init and just add new drivers for something I'm interested in or is this all or nothing kind of thing?
Yes you can do things gradually. If you have a sane early memory environment then you shouldn't have much trouble.
Thank you.
-- Maxim Sloyko
Regards, Simon