1 Dec
2004
1 Dec
'04
9:13 a.m.
In message 3D9FDCA910DD4445896A0BE5ECF009D401CCAA1F@bla.satyam.com you wrote:
I got the Device Id value from the Intel Site but I didn't found any thing like Internal Flash Identification Code. Is this value is to be supplied by the vendor if not then what value should I have to assign to the Macro FLASH_28F256J3.
As the name "Internal FLASH identification codes" suggests this is a code that is _internal_ to U-Boot so you will not find it mentioned in any vendor documentation (at least not before they are sterting to manufacture "U-Boot flash chips" :-)
Just chose the next unused entry, but keep in mind that odd numbers are used only for "bottom boot sector" types!
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
HEALTH WARNING: Care Should Be Taken When Lifting This Product, Since
Its Mass, and Thus Its Weight, Is Dependent on Its Velocity Relative
to the User.