Hi Holger,
On Mon, 27 Jan 2014 16:58:29 +0100, Holger Brunck holger.brunck@keymile.com wrote:
From: Gerlando Falauto gerlando.falauto@keymile.com
KMSUGP1 is from a u-boot perspective (almost) identical to KMNUSA. The only difference is that the PCIe reset is connected to Kirkwood pin MPP7_PEX_RST_OUTn, we use a dedicated config flag KM_PCIE_RESET_MPP7. Such pin should theoretically be handled by the PCIe subsystem automatically, but this turned out not to be the case. So simply configure this PIN as a GPIO and issue a pulse manually.
Signed-off-by: Gerlando Falauto gerlando.falauto@keymile.com Cc: Karlheinz Jerg karlheinz.jerg@keymile.com Cc: Valentin Longchamp valenting.longchamp@keymile.com Cc: Holger Brunck holger.brunck@keymile.com
This one does not apply properly on u-boot-arm/master. Can you look into this and post a V2 (of just 8/8) ?
Amicalement,