Dear Aneesh:
Usualy one will see this when the PHY is not in the list of supported PHY's in one's MAC driver. Start from the message you see, look in the source for this message and then trace back in the source to see how you PHY is not recognized.
This usually occurs when one uses a PHY in in a doard definition where that PHY is not supported. Of course, this can also occur when the PHY is not running or is wired to an inappropriate (or none) phy address on its MII bus. On Mar 15, 2011 11:18 PM, "Aneesh kumar VR" aneeshkumar.vr@vvdntech.com wrote:
Hi ,
I have design over that using the VSC8641 PHY on RGMII interface of AR7161 , I am getting error "Error:No PHY IDs found" in U-boot for many times . could any one help me to find out the issue .
-- Regards,
Aneesh Kumar V R
M +91-8086241258