Add description of compiling u-boot for K230 CanMV.
Since the vendor's u-boot-spl verifies u-boot header [1], it is necessary to use the Python script from vendor to add the header to the u-boot image.
[1] https://github.com/kendryte/k230_sdk/blob/v1.8/src/little/uboot/board/canaan...
Signed-off-by: Junhui Liu junhui.liu@pigmoral.tech --- doc/board/canaan/index.rst | 8 ++++ doc/board/canaan/k230_canmv.rst | 88 +++++++++++++++++++++++++++++++++++++++++ doc/board/index.rst | 1 + 3 files changed, 97 insertions(+)
diff --git a/doc/board/canaan/index.rst b/doc/board/canaan/index.rst new file mode 100644 index 0000000000000000000000000000000000000000..e2892d2a7f342f507516a11eb81cd26181ecf66b --- /dev/null +++ b/doc/board/canaan/index.rst @@ -0,0 +1,8 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Canaan +====== +.. toctree:: + :maxdepth: 1 + + k230_canmv diff --git a/doc/board/canaan/k230_canmv.rst b/doc/board/canaan/k230_canmv.rst new file mode 100644 index 0000000000000000000000000000000000000000..534ad7cb7a89ad1de2b18bcac64c120cdaec5003 --- /dev/null +++ b/doc/board/canaan/k230_canmv.rst @@ -0,0 +1,88 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +K230 CanMV +========== + +K230 RISC-V SoC +------------------ +The K230 chip is the latest generation SoC product in Canaan Technology's +Kendryte series of AIOT chips. + +Mainline support +---------------- + +The support for following drivers are already enabled: + +1. ns16550 UART +2. DWC2 OTG USB controller + +Building +~~~~~~~~ + +1. Get the RISC-V toolchain. +2. Setup cross compilation environment variable: +3. Get the `firmware_gen.py`_ from vendor. + +.. code-block:: console + + export CROSS_COMPILE=riscv64-linux-gnu- + cd <U-Boot-dir> + make k230_canmv_defconfig + make + cp u-boot-gz.img u-boot-gz.img.tmp + pip install gmssl pycryptodome + python3 firmware_gen.py -i u-boot-gz.img.tmp -o u-boot-head.img -n + +This will generate u-boot-head.img. + +.. _firmware_gen.py: https://raw.githubusercontent.com/kendryte/k230_sdk/refs/tags/v1.8/src/littl... + +Booting +~~~~~~~ + +Currently, we rely on vendor u-boot-spl to initialize the +ddr and load the u-boot image, then bootup from it. + +1. Prepare a SD card with the `vendor image`_ burned on it. + +2. Write the U-Boot image to the SD card at offset 2MB. + +.. code-block:: console + + dd if=u-boot-head.img of=/dev/sd[x] bs=1M seek=2 + +3. Insert the SD card into the board and power it on. + +.. _vendor image: https://kendryte-download.canaan-creative.com/developer/k230/CanMV-K230_debi... + +Sample boot log from K230 CanMV board +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. code-block:: none + + U-Boot 2025.01-00645-g2d81c4788455 (Jan 14 2025 - 23:15:07 +0800) + + DRAM: 512 MiB + Core: 15 devices, 11 uclasses, devicetree: separate + Loading Environment from nowhere... OK + In: serial@91400000 + Out: serial@91400000 + Err: serial@91400000 + Net: No ethernet found. + K230# cpu list + 0: cpu@0 thead,c908 + K230# usb start + starting USB... + Bus usb@91540000: USB DWC2 + scanning bus usb@91540000 for devices... + Warning: r8152_eth (eth0) using random MAC address - 1e:33:97:47:e6:32 + 2 USB Device(s) found + K230# usb tree + USB device tree: + 1 Hub (480 Mb/s, 0mA) + | U-Boot Root Hub + | + +-2 Vendor specific (480 Mb/s, 100mA) + Realtek USB 10/100 LAN 000000000000 + + K230# diff --git a/doc/board/index.rst b/doc/board/index.rst index b1c470eb2cbb1c07f907eb2282039520c219c72a..74c4dd1f42d7e6a6d877020a79cb0a4f9c7c5335 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -21,6 +21,7 @@ Board-specific doc beagle/index broadcom/index bsh/index + canaan/index cloos/index congatec/index coolpi/index