于 2018年7月31日 GMT+08:00 下午1:57:45, Jagan Teki jagan@amarulasolutions.com 写到:
On Tue, Jul 31, 2018 at 11:24 AM, Icenowy Zheng icenowy@aosc.io wrote:
于 2018年7月31日 GMT+08:00 下午1:49:18, Jagan Teki
jagan@amarulasolutions.com 写到:
On Tue, Jul 31, 2018 at 11:15 AM, Icenowy Zheng icenowy@aosc.io wrote:
于 2018年7月31日 GMT+08:00 下午1:42:46, Jagan Teki
jagan@amarulasolutions.com 写到:
On Sun, Jul 29, 2018 at 6:54 PM, Icenowy Zheng icenowy@aosc.io
wrote:
在 2018-07-27五的 18:48 +0530，Jagan Teki写道： > On Thu, Jul 26, 2018 at 12:35 PM, Icenowy Zheng
> wrote: > > > > > > 于 2018年7月26日 GMT+08:00 下午3:02:50, Jagan Teki < > > jagan@amarulasolutions.com> 写到: > > > On Sat, Jul 21, 2018 at 1:50 PM, Icenowy Zheng
> > > wrote: > > > > This patchset trys to add support for Allwinner H6 SoC to
U-
> > > > Boot. > > > > > > > > Allwinner H6 is a quite new Allwinner SoC, with several
parts
> > > > changed > > > > > > a > > > > lot (memory map, DRAM controller, CCU, so on). The
position
> > > > which SPL > > > > will be loaded (SRAM A1) also changed to 0x20000. > > > > > > > > The Pine H64 board support comes with this patchset, as
this
is
> > > > the > > > > first H6 board that I can get (being early bird). > > > > > > > > Icenowy Zheng (13): > > > > sunxi: change SUNXI_HIGH_SRAM option to
SUNXI_SRAM_ADDRESS
> > > > sunxi: add basic memory map definitions of H6 SoC > > > > sunxi: change RMR64's RVBAR address for H6 > > > > sunxi: change ATF position for H6 > > > > sunxi: add config for SPL at 0x20000 on H6 > > > > sunxi: change GIC address on H6 > > > > sunxi: add clock code for H6 > > > > sunxi: use sun6i-style watchdog for H6 > > > > sunxi: add UART0 setup for H6 > > > > sunxi: add MMC support for H6 > > > > sunxi: add DRAM support to H6 > > > > sunxi: add support for Allwinner H6 SoC > > > > sunxi: add support for Pine H64 board > > Reviewed-by: Jagan Teki jagan@openedev.com
Do you consider merge it now?
Yes, but there is a comment about kconfig move [1], I'm OK to send
the
change later since it can effect all SoC.
Yes I suppose so.
Thanks.
Also apply for the DM MMC change.
Which change, can you point?
Migrate MMC driver to DM (currently the DM sunxi_mmc driver part only work for A10/13/20)
Yes I will add H6 changes as part of this series in next version.
Thanks for taking it!