This anchor is only for the k210 partition layout, so rename it appropriately. This keeps it from conflicting with the (to be added) anchor for U-Boot partitions in general.
Signed-off-by: Sean Anderson sean.anderson@seco.com ---
Changes in v5: - New
doc/board/sipeed/maix.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/doc/board/sipeed/maix.rst b/doc/board/sipeed/maix.rst index bf945b3458..ef79297ef0 100644 --- a/doc/board/sipeed/maix.rst +++ b/doc/board/sipeed/maix.rst @@ -258,7 +258,7 @@ SPI Flash """""""""
To load an image off of SPI flash, first set up a partition as described in -:ref:`partitions`. Then, use ``mtd`` to load that partition +:ref:`k210_partitions`. Then, use ``mtd`` to load that partition
.. code-block:: none
@@ -401,7 +401,7 @@ Sipeed MAIX boards typically provide around 16 MiB of SPI NOR flash. U-Boot is stored in the first 1 MiB or so of this flash. U-Boot's environment is stored at the end of flash.
-.. _partitions: +.. _k210_partitions:
Partitions """"""""""