Currently the SATA controller clock is configured as CSB clock, usually the CSB clock is 400/333/266MHz.
However, The SATA IP block is only guaranteed to operate up to 200 MHz as stated in the HW spec.
The bug is reported by Joe D'Abbraccio ljd015@freescale.com
This patch makes the SATA clock as half of CSB clock.
Signed-off-by: Dave Liu daveliu@freescale.com --- include/configs/MPC837XEMDS.h | 2 +- include/configs/MPC837XERDB.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 7c4e76e..7fc0f7e 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -96,7 +96,7 @@ */ #define CFG_SCCR_TSEC1CM 1 /* CSB:eTSEC1 = 1:1 */ #define CFG_SCCR_TSEC2CM 1 /* CSB:eTSEC2 = 1:1 */ -#define CFG_SCCR_SATACM SCCR_SATACM_1 /* CSB:SATA[0:3] = 1:1 */ +#define CFG_SCCR_SATACM SCCR_SATACM_2 /* CSB:SATA[0:3] = 2:1 */
/* * System IO Config diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index eaac525..c698ff8 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -108,7 +108,7 @@ /* System Clock Configuration Register */ #define CFG_SCCR_TSEC1CM 1 /* eTSEC1 clock mode (0-3) */ #define CFG_SCCR_TSEC2CM 1 /* eTSEC2 clock mode (0-3) */ -#define CFG_SCCR_SATACM SCCR_SATACM_1 /* SATA1-4 clock mode (0-3) */ +#define CFG_SCCR_SATACM SCCR_SATACM_2 /* SATA1-4 clock mode (0-3) */
/* * System IO Config