Convert the board to enable the driver model support for LCD/video.
Signed-off-by: Wenyou Yang wenyou.yang@microchip.com ---
arch/arm/dts/at91-sama5d2_xplained.dts | 60 ++++++++++++++++ arch/arm/dts/sama5d2.dtsi | 7 ++ arch/arm/mach-at91/Kconfig | 1 + board/atmel/sama5d2_xplained/sama5d2_xplained.c | 95 ++----------------------- configs/sama5d2_xplained_mmc_defconfig | 2 + configs/sama5d2_xplained_spiflash_defconfig | 2 + include/configs/sama5d2_xplained.h | 12 ---- 7 files changed, 79 insertions(+), 100 deletions(-)
diff --git a/arch/arm/dts/at91-sama5d2_xplained.dts b/arch/arm/dts/at91-sama5d2_xplained.dts index b00aaa2c79..01326a1ee0 100644 --- a/arch/arm/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/dts/at91-sama5d2_xplained.dts @@ -41,6 +41,31 @@ };
apb { + hlcdc: hlcdc@f0000000 { + atmel,vl-bpix = <4>; + atmel,guard-time = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>; + status = "okay"; + u-boot,dm-pre-reloc; + + display-timings { + u-boot,dm-pre-reloc; + 480x272 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hsync-len = <41>; + hfront-porch = <2>; + hback-porch = <2>; + vfront-porch = <2>; + vback-porch = <2>; + vsync-len = <11>; + u-boot,dm-pre-reloc; + }; + }; + }; + qspi0: spi@f0020000 { status = "okay";
@@ -117,6 +142,41 @@ bias-disable; };
+ pinctrl_lcd_base: pinctrl_lcd_base { + pinmux = <PIN_PC30__LCDVSYNC>, + <PIN_PC31__LCDHSYNC>, + <PIN_PD1__LCDDEN>, + <PIN_PD0__LCDPCK>; + bias-disable; + }; + + pinctrl_lcd_pwm: pinctrl_lcd_pwm { + pinmux = <PIN_PC28__LCDPWM>; + bias-disable; + }; + + pinctrl_lcd_rgb666: pinctrl_lcd_rgb666 { + pinmux = <PIN_PC10__LCDDAT2>, + <PIN_PC11__LCDDAT3>, + <PIN_PC12__LCDDAT4>, + <PIN_PC13__LCDDAT5>, + <PIN_PC14__LCDDAT6>, + <PIN_PC15__LCDDAT7>, + <PIN_PC16__LCDDAT10>, + <PIN_PC17__LCDDAT11>, + <PIN_PC18__LCDDAT12>, + <PIN_PC19__LCDDAT13>, + <PIN_PC20__LCDDAT14>, + <PIN_PC21__LCDDAT15>, + <PIN_PC22__LCDDAT18>, + <PIN_PC23__LCDDAT19>, + <PIN_PC24__LCDDAT20>, + <PIN_PC25__LCDDAT21>, + <PIN_PC26__LCDDAT22>, + <PIN_PC27__LCDDAT23>; + bias-disable; + }; + pinctrl_macb0_phy_irq: macb0_phy_irq { pinmux = <PIN_PC9__GPIO>; bias-disable; diff --git a/arch/arm/dts/sama5d2.dtsi b/arch/arm/dts/sama5d2.dtsi index 8d89b83b53..fbaac0834c 100644 --- a/arch/arm/dts/sama5d2.dtsi +++ b/arch/arm/dts/sama5d2.dtsi @@ -69,6 +69,13 @@ #size-cells = <1>; u-boot,dm-pre-reloc;
+ hlcdc: hlcdc@f0000000 { + compatible = "atmel,at91sam9x5-hlcdc"; + reg = <0xf0000000 0x2000>; + clocks = <&lcdc_clk>; + status = "disabled"; + }; + pmc: pmc@f0014000 { compatible = "atmel,sama5d2-pmc", "syscon"; reg = <0xf0014000 0x160>; diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 033c1efd2b..a52599ab5b 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -97,6 +97,7 @@ config TARGET_SAMA5D2_XPLAINED select CPU_V7 select SUPPORT_SPL select BOARD_EARLY_INIT_F + select BOARD_LATE_INIT
config TARGET_SAMA5D3_XPLAINED bool "SAMA5D3 Xplained board" diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c index fce931d95f..74ef7df079 100644 --- a/board/atmel/sama5d2_xplained/sama5d2_xplained.c +++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c @@ -6,10 +6,7 @@ */
#include <common.h> -#include <atmel_hlcdc.h> #include <debug_uart.h> -#include <lcd.h> -#include <version.h> #include <asm/io.h> #include <asm/arch/at91_common.h> #include <asm/arch/atmel_pio4.h> @@ -26,90 +23,15 @@ static void board_usb_hw_init(void) atmel_pio4_set_pio_output(AT91_PIO_PORTB, 10, 1); }
-#ifdef CONFIG_LCD -vidinfo_t panel_info = { - .vl_col = 480, - .vl_row = 272, - .vl_clk = 9000000, - .vl_bpix = LCD_BPP, - .vl_tft = 1, - .vl_hsync_len = 41, - .vl_left_margin = 2, - .vl_right_margin = 2, - .vl_vsync_len = 11, - .vl_upper_margin = 2, - .vl_lower_margin = 2, - .mmio = ATMEL_BASE_LCDC, -}; - -/* No power up/down pin for the LCD pannel */ -void lcd_enable(void) { /* Empty! */ } -void lcd_disable(void) { /* Empty! */ } - -unsigned int has_lcdc(void) +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) { - return 1; -} - -static void board_lcd_hw_init(void) -{ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDPWM */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDISP */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDVSYNC */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 31, 0); /* LCDHSYNC */ - atmel_pio4_set_a_periph(AT91_PIO_PORTD, 0, 0); /* LCDPCK */ - atmel_pio4_set_a_periph(AT91_PIO_PORTD, 1, 0); /* LCDDEN */ - - /* LCDDAT0 */ - /* LCDDAT1 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDDAT2 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDDAT3 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDDAT4 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDDAT5 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDDAT6 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDDAT7 */ - - /* LCDDAT8 */ - /* LCDDAT9 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDDAT10 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDDAT11 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDDAT12 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDDAT13 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDDAT14 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDDAT15 */ - - /* LCDD16 */ - /* LCDD17 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDDAT18 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDDAT19 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDAT20 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 25, 0); /* LCDDAT21 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDDAT22 */ - atmel_pio4_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDDAT23 */ - - at91_periph_clk_enable(ATMEL_ID_LCDC); -} - -#ifdef CONFIG_LCD_INFO -void lcd_show_board_info(void) -{ - ulong dram_size; - int i; - char temp[32]; - - lcd_printf("%s\n", U_BOOT_VERSION); - lcd_printf("2015 ATMEL Corp\n"); - lcd_printf("%s CPU at %s MHz\n", get_cpu_name(), - strmhz(temp, get_cpu_clk_rate())); - - dram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) - dram_size += gd->bd->bi_dram[i].size; - - lcd_printf("%ld MB SDRAM\n", dram_size >> 20); +#ifdef CONFIG_DM_VIDEO + at91_video_show_board_info(); +#endif + return 0; } -#endif /* CONFIG_LCD_INFO */ -#endif /* CONFIG_LCD */ +#endif
#ifdef CONFIG_DEBUG_UART_BOARD_INIT static void board_uart1_hw_init(void) @@ -142,9 +64,6 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#ifdef CONFIG_LCD - board_lcd_hw_init(); -#endif #ifdef CONFIG_CMD_USB board_usb_hw_init(); #endif diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig index f1b1d0a93b..4333ea6f93 100644 --- a/configs/sama5d2_xplained_mmc_defconfig +++ b/configs/sama5d2_xplained_mmc_defconfig @@ -78,3 +78,5 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y CONFIG_FAT_WRITE=y +CONFIG_DM_VIDEO=y +CONFIG_ATMEL_HLCD=y diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig index 896e333e49..1176ef1267 100644 --- a/configs/sama5d2_xplained_spiflash_defconfig +++ b/configs/sama5d2_xplained_spiflash_defconfig @@ -75,3 +75,5 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y +CONFIG_DM_VIDEO=y +CONFIG_ATMEL_HLCD=y diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h index bcddd5b0fe..fdfc1d1bc0 100644 --- a/include/configs/sama5d2_xplained.h +++ b/include/configs/sama5d2_xplained.h @@ -38,18 +38,6 @@ /* NAND flash */ #undef CONFIG_CMD_NAND
-/* LCD */ - -#ifdef CONFIG_LCD -#define LCD_BPP LCD_COLOR16 -#define LCD_OUTPUT_BPP 24 -#define CONFIG_LCD_LOGO -#define CONFIG_LCD_INFO -#define CONFIG_LCD_INFO_BELOW_LOGO -#define CONFIG_ATMEL_HLCD -#define CONFIG_ATMEL_LCD_RGB565 -#endif - #ifdef CONFIG_SYS_USE_MMC
/* bootstrap + u-boot + env in sd card */