On Mon, 5 May 2008 11:56:57 -0700 Ronald Madrid ron_madrid@hotmail.com wrote:
I'm developing a board based on the MPC8313 and want to have my code included in the u-boot project, but have a few questions.
great!
I have created in u-boot-1.3.2 my own folder in the board directory and all appropriate config files. I have also edited the Makefile on the top level.
sounds good, you'll need to add a MAINTAINERS entry, a MAKEALL entry, and preferably add a doc/README.<myboard> file.
Everything builds for my board's u-boot, but here are my questions. I have to create a new folder in the nand_spl/board folder as my board supports NAND flash. Is that ok? Also, to add NAND support I have to edit the cpu/mpc83xx/start.S
yes
file. Is this allowed?
depends on the bits themselves; please send your patch for review on this list.
After I get my code working is there a specific person that I forward the patches to?
the 83xx specific bits (including the general board support bits) should probably go through me, and Stefan Roese can pick up your NAND-specific bits, unless Wolfgang beats us to it.
Kim