Re: [PATCH next v7 05/10] usb: add MediaTek USB3 DRD driver

On Tue, 2020-10-13 at 22:26 +0800, Bin Meng wrote:

On Fri, Sep 18, 2020 at 5:12 PM Chunfeng Yun chunfeng.yun@mediatek.com wrote:

...

This patch adds support for the MediaTek USB3 DRD controller, its host side is based on xHCI, this driver supports device mode and host mode.

Signed-off-by: Chunfeng Yun chunfeng.yun@mediatek.com

I can only comment some generic stuff, since I have no access to the controller datasheet.

It's good enough, I and my workmate will test the function

...

---

v7: 1. use xhci quirk flag XHCI_MTK_HOST

v6: no changes

v5: 1. change condition of readl_poll_timeout() when check clocks

v4: 1. remove unused member @busy and @wedged, use their flags instead 2. support force_vbus mode 3. add a glue driver using UCLASS_NOP 4. add host driver, and rebuild host flow

v3 changes 1. add ->udc_set_speed() 2. simplify some code flow

v2: simplify QMU operations

Makefile | 1 + drivers/usb/Kconfig | 2 + drivers/usb/mtu3/Kconfig | 45 ++ drivers/usb/mtu3/Makefile | 11 + drivers/usb/mtu3/mtu3.h | 423 +++++++++++++++++ drivers/usb/mtu3/mtu3_core.c | 838 +++++++++++++++++++++++++++++++++ drivers/usb/mtu3/mtu3_dr.h | 52 +++ drivers/usb/mtu3/mtu3_gadget.c | 686 +++++++++++++++++++++++++++ drivers/usb/mtu3/mtu3_gadget_ep0.c | 933 +++++++++++++++++++++++++++++++++++++ drivers/usb/mtu3/mtu3_host.c | 141 ++++++ drivers/usb/mtu3/mtu3_hw_regs.h | 515 ++++++++++++++++++++ drivers/usb/mtu3/mtu3_plat.c | 368 +++++++++++++++ drivers/usb/mtu3/mtu3_qmu.c | 504 ++++++++++++++++++++ drivers/usb/mtu3/mtu3_qmu.h | 37 ++ 14 files changed, 4556 insertions(+) create mode 100644 drivers/usb/mtu3/Kconfig create mode 100644 drivers/usb/mtu3/Makefile create mode 100644 drivers/usb/mtu3/mtu3.h create mode 100644 drivers/usb/mtu3/mtu3_core.c create mode 100644 drivers/usb/mtu3/mtu3_dr.h create mode 100644 drivers/usb/mtu3/mtu3_gadget.c create mode 100644 drivers/usb/mtu3/mtu3_gadget_ep0.c create mode 100644 drivers/usb/mtu3/mtu3_host.c create mode 100644 drivers/usb/mtu3/mtu3_hw_regs.h create mode 100644 drivers/usb/mtu3/mtu3_plat.c create mode 100644 drivers/usb/mtu3/mtu3_qmu.c create mode 100644 drivers/usb/mtu3/mtu3_qmu.h

diff --git a/Makefile b/Makefile index 7a05fc7..2dcc41a 100644 --- a/Makefile +++ b/Makefile @@ -795,6 +795,7 @@ libs-y += drivers/usb/eth/ libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/ libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/ libs-y += drivers/usb/host/ +libs-y += drivers/usb/mtu3/ libs-y += drivers/usb/musb/ libs-y += drivers/usb/musb-new/ libs-y += drivers/usb/phy/ diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 34881a1..fedc013 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -72,6 +72,8 @@ source "drivers/usb/cdns3/Kconfig"

source "drivers/usb/dwc3/Kconfig"

+source "drivers/usb/mtu3/Kconfig"

source "drivers/usb/musb/Kconfig"

source "drivers/usb/musb-new/Kconfig" diff --git a/drivers/usb/mtu3/Kconfig b/drivers/usb/mtu3/Kconfig new file mode 100644 index 0000000..66651ad --- /dev/null +++ b/drivers/usb/mtu3/Kconfig @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# For MTK USB3.0 IP

+config USB_MTU3

•   bool "MediaTek USB3 Dual Role controller"
  

•   depends on USB || USB_GADGET
  

•   depends on ARCH_MEDIATEK
  

•   help
  

•     Say Y here if your system runs on MediaTek SoCs with
  

•     Dual Role SuperSpeed USB controller. You can select usb
  

•     mode as peripheral role or host role.
  

•     If you don't know what this is, please say N.
  

+if USB_MTU3 +choice

•   bool "MTU3 Mode Selection"
  

•   default USB_MTU3_GADGET if USB_GADGET
  

•   default USB_MTU3_HOST if (USB && !USB_GADGET)
  

+config USB_MTU3_HOST

•   bool "Host only mode"
  

•   depends on USB=y || USB=USB_MTU3
  

Is this Kconfig grammer supported by U-Boot?

Yes, no error happens when use menuconfig, but can be simplified, I modify it.

Thanks a lot

...

•   select USB_XHCI_HCD
  

•   help
  

•     Select this when you want to use MTU3 in host mode only,
  

•     thereby the gadget feature will be regressed.
  

+config USB_MTU3_GADGET

•   bool "Gadget only mode"
  

•   depends on USB_GADGET=y || USB_GADGET=USB_MTU3
  

•   select USB_GADGET_DUALSPEED
  

•   help
  

•     Select this when you want to use MTU3 in gadget mode only,
  

•     thereby the host feature will be regressed.
  

+endchoice

+config USB_MTU3_DEBUG

•   bool "Enable Debugging Messages"
  

•   help
  

•     Say Y here to enable debugging messages in the MTU3 Driver.
  

+endif diff --git a/drivers/usb/mtu3/Makefile b/drivers/usb/mtu3/Makefile new file mode 100644 index 0000000..234f3a3 --- /dev/null +++ b/drivers/usb/mtu3/Makefile @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0

+ccflags-$(CONFIG_USB_MTU3_DEBUG) += -DDEBUG

+obj-$(CONFIG_USB_MTU3) += mtu3.o

+mtu3-y := mtu3_plat.o

+obj-$(CONFIG_USB_MTU3_GADGET) += mtu3_core.o mtu3_gadget_ep0.o mtu3_gadget.o +obj-$(CONFIG_USB_MTU3_GADGET) += mtu3_qmu.o +obj-$(CONFIG_USB_MTU3_HOST) += mtu3_host.o

[snip]

Regards, Bin