With changes to the rtl8169 ethernet to improve cache support, we have needed additional cache functions for mpc8245. As the board maintainer has been unresponsive, remove this board.
Cc: Guennadi Liakhovetski g.liakhovetski@gmx.de Signed-off-by: Tom Rini trini@ti.com --- board/linkstation/Makefile | 8 - board/linkstation/avr.c | 280 ---------------------- board/linkstation/hwctl.c | 133 ----------- board/linkstation/ide.c | 85 ------- board/linkstation/linkstation.c | 124 ---------- boards.cfg | 1 - include/configs/linkstation.h | 504 --------------------------------------- 7 files changed, 1135 deletions(-) delete mode 100644 board/linkstation/Makefile delete mode 100644 board/linkstation/avr.c delete mode 100644 board/linkstation/hwctl.c delete mode 100644 board/linkstation/ide.c delete mode 100644 board/linkstation/linkstation.c delete mode 100644 include/configs/linkstation.h
diff --git a/board/linkstation/Makefile b/board/linkstation/Makefile deleted file mode 100644 index 3eeba7d..0000000 --- a/board/linkstation/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = linkstation.o ide.o hwctl.o avr.o diff --git a/board/linkstation/avr.c b/board/linkstation/avr.c deleted file mode 100644 index 62e586b..0000000 --- a/board/linkstation/avr.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * avr.c - * - * AVR functions - * - * Copyright (C) 2006 Mihai Georgian u-boot@linuxnotincluded.org.uk - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <ns16550.h> -#include <stdio_dev.h> - -/* Button codes from the AVR */ -#define PWRR 0x20 /* Power button release */ -#define PWRP 0x21 /* Power button push */ -#define RESR 0x22 /* Reset button release */ -#define RESP 0x23 /* Reset button push */ -#define AVRINIT 0x33 /* Init complete */ -#define AVRRESET 0x31 /* Reset request */ - -/* LED commands */ -#define PWRBLINKSTRT '[' /* Blink power LED */ -#define PWRBLINKSTOP 'Z' /* Solid power LED */ -#define HDDLEDON 'W' /* HDD LED on */ -#define HDDLEDOFF 'V' /* HDD LED off */ -#define HDDBLINKSTRT 'Y' /* HDD LED start blink */ -#define HDDBLINKSTOP 'X' /* HDD LED stop blink */ - -/* Timings for LEDs blinking to show choice */ -#define PULSETIME 250 /* msecs */ -#define LONGPAUSE (5 * PULSETIME) - -/* Button press times */ -#define PUSHHOLD 1000 /* msecs */ -#define NOBUTTON (6 * (LONGPAUSE+PULSETIME)) - -/* Boot and console choices */ -#define MAX_BOOT_CHOICE 3 - -static char *consoles[] = { - "serial", -#if defined(CONFIG_NETCONSOLE) - "nc", -#endif -}; -#define MAX_CONS_CHOICE (sizeof(consoles)/sizeof(char *)) - -#if !defined(CONFIG_NETCONSOLE) -#define DEF_CONS_CHOICE 0 -#else -#define DEF_CONS_CHOICE 1 -#endif - -#define perror(fmt, args...) printf("%s: " fmt, __FUNCTION__ , ##args) - -extern void miconCntl_SendCmd(unsigned char dat); -extern void miconCntl_DisWDT(void); - -static int boot_stop; - -static int boot_choice = 1; -static int cons_choice = DEF_CONS_CHOICE; - -static char envbuffer[16]; - -void init_AVR_DUART (void) -{ - NS16550_t AVR_port = (NS16550_t) CONFIG_SYS_NS16550_COM2; - int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / 9600; - - /* - * AVR port init sequence taken from - * the original Linkstation init code - * Normal U-Boot serial reinit doesn't - * work because the AVR uses even parity - */ - AVR_port->lcr = 0x00; - AVR_port->ier = 0x00; - AVR_port->lcr = UART_LCR_BKSE; - AVR_port->dll = clock_divisor & 0xff; - AVR_port->dlm = (clock_divisor >> 8) & 0xff; - AVR_port->lcr = UART_LCR_WLS_8 | UART_LCR_PEN | UART_LCR_EPS; - AVR_port->mcr = 0x00; - AVR_port->fcr = UART_FCR_FIFO_EN | UART_FCR_RXSR | UART_FCR_TXSR; - - miconCntl_DisWDT(); - - boot_stop = 0; - miconCntl_SendCmd(PWRBLINKSTRT); -} - -static inline int avr_tstc(void) -{ - return (NS16550_tstc((NS16550_t)CONFIG_SYS_NS16550_COM2)); -} - -static inline char avr_getc(void) -{ - return (NS16550_getc((NS16550_t)CONFIG_SYS_NS16550_COM2)); -} - -static int push_timeout(char button_code) -{ - ulong push_start = get_timer(0); - while (get_timer(push_start) <= PUSHHOLD) - if (avr_tstc() && avr_getc() == button_code) - return 0; - return 1; -} - -static void next_boot_choice(void) -{ - ulong return_start; - ulong pulse_start; - int on_times; - int button_on; - int led_state; - char c; - - button_on = 0; - return_start = get_timer(0); - - on_times = boot_choice; - led_state = 0; - miconCntl_SendCmd(HDDLEDOFF); - pulse_start = get_timer(0); - - while (get_timer(return_start) <= NOBUTTON || button_on) { - if (avr_tstc()) { - c = avr_getc(); - if (c == PWRP) - button_on = 1; - else if (c == PWRR) { - button_on = 0; - return_start = get_timer(0); - if (++boot_choice > MAX_BOOT_CHOICE) - boot_choice = 1; - sprintf(envbuffer, "bootcmd%d", boot_choice); - if (getenv(envbuffer)) { - sprintf(envbuffer, "run bootcmd%d", boot_choice); - setenv("bootcmd", envbuffer); - } - on_times = boot_choice; - led_state = 1; - miconCntl_SendCmd(HDDLEDON); - pulse_start = get_timer(0); - } else { - perror("Unexpected code: 0x%02X\n", c); - } - } - if (on_times && get_timer(pulse_start) > PULSETIME) { - if (led_state == 1) { - --on_times; - led_state = 0; - miconCntl_SendCmd(HDDLEDOFF); - } else { - led_state = 1; - miconCntl_SendCmd(HDDLEDON); - } - pulse_start = get_timer(0); - } - if (!on_times && get_timer(pulse_start) > LONGPAUSE) { - on_times = boot_choice; - led_state = 1; - miconCntl_SendCmd(HDDLEDON); - pulse_start = get_timer(0); - } - } - if (led_state) - miconCntl_SendCmd(HDDLEDOFF); -} - -void next_cons_choice(int console) -{ - ulong return_start; - ulong pulse_start; - int on_times; - int button_on; - int led_state; - char c; - - button_on = 0; - cons_choice = console; - return_start = get_timer(0); - - on_times = cons_choice+1; - led_state = 1; - miconCntl_SendCmd(HDDLEDON); - pulse_start = get_timer(0); - - while (get_timer(return_start) <= NOBUTTON || button_on) { - if (avr_tstc()) { - c = avr_getc(); - if (c == RESP) - button_on = 1; - else if (c == RESR) { - button_on = 0; - return_start = get_timer(0); - cons_choice = (cons_choice + 1) % MAX_CONS_CHOICE; - console_assign(stdin, consoles[cons_choice]); - console_assign(stdout, consoles[cons_choice]); - console_assign(stderr, consoles[cons_choice]); - on_times = cons_choice+1; - led_state = 0; - miconCntl_SendCmd(HDDLEDOFF); - pulse_start = get_timer(0); - } else { - perror("Unexpected code: 0x%02X\n", c); - } - } - if (on_times && get_timer(pulse_start) > PULSETIME) { - if (led_state == 0) { - --on_times; - led_state = 1; - miconCntl_SendCmd(HDDLEDON); - } else { - led_state = 0; - miconCntl_SendCmd(HDDLEDOFF); - } - pulse_start = get_timer(0); - } - if (!on_times && get_timer(pulse_start) > LONGPAUSE) { - on_times = cons_choice+1; - led_state = 0; - miconCntl_SendCmd(HDDLEDOFF); - pulse_start = get_timer(0); - } - } - if (led_state); - miconCntl_SendCmd(HDDLEDOFF); -} - -int avr_input(void) -{ - char avr_button; - - if (!avr_tstc()) - return 0; - - avr_button = avr_getc(); - switch (avr_button) { - case PWRP: - if (push_timeout(PWRR)) { - /* Timeout before power button release */ - boot_stop = ~boot_stop; - if (boot_stop) - miconCntl_SendCmd(PWRBLINKSTOP); - else - miconCntl_SendCmd(PWRBLINKSTRT); - /* Wait for power button release */ - while (avr_getc() != PWRR) - ; - } else - /* Power button released */ - next_boot_choice(); - break; - case RESP: - /* Wait for Reset button release */ - while (avr_getc() != RESR) - ; - next_cons_choice(cons_choice); - break; - case AVRINIT: - return 0; - default: - perror("Unexpected code: 0x%02X\n", avr_button); - return 0; - } - if (boot_stop) - return (-3); - else - return (-2); -} - -void avr_StopBoot(void) -{ - boot_stop = ~0; - miconCntl_SendCmd(PWRBLINKSTOP); -} diff --git a/board/linkstation/hwctl.c b/board/linkstation/hwctl.c deleted file mode 100644 index d2090be..0000000 --- a/board/linkstation/hwctl.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * hwctl.c - * - * LinkStation HW Control Driver - * - * Copyright (C) 2001-2004 BUFFALO INC. - * - * This software may be used and distributed according to the terms of - * the GNU General Public License (GPL), incorporated herein by reference. - * Drivers based on or derived from this code fall under the GPL and must - * retain the authorship, copyright and license notice. This file is not - * a complete program and may only be used when the entire operating - * system is licensed under the GPL. - * - */ - -#include <config.h> -#include <common.h> -#include <command.h> -#include <asm/io.h> - -#define AVR_PORT CONFIG_SYS_NS16550_COM2 - -/* 2005.5.10 BUFFALO add */ -/*--------------------------------------------------------------*/ -static inline void miconCntl_SendUart(unsigned char dat) -{ - out_8((unsigned char *)AVR_PORT, dat); - mdelay(1); -} - -/*--------------------------------------------------------------*/ -void miconCntl_SendCmd(unsigned char dat) -{ - int i; - - for (i=0; i<4; i++){ - miconCntl_SendUart(dat); - } -} - -/*--------------------------------------------------------------*/ -void miconCntl_FanLow(void) -{ -#ifdef CONFIG_HTGL - miconCntl_SendCmd(0x5C); -#endif -} - -/*--------------------------------------------------------------*/ -void miconCntl_FanHigh(void) -{ -#ifdef CONFIG_HTGL - miconCntl_SendCmd(0x5D); -#endif -} - -/*--------------------------------------------------------------*/ -/* 1000Mbps */ -void miconCntl_Eth1000M(int up) -{ -#ifdef CONFIG_HTGL - if (up) - miconCntl_SendCmd(0x93); - else - miconCntl_SendCmd(0x92); -#else - if (up) - miconCntl_SendCmd(0x5D); - else - miconCntl_SendCmd(0x5C); -#endif -} - -/*--------------------------------------------------------------*/ -/* 100Mbps */ -void miconCntl_Eth100M(int up) -{ -#ifdef CONFIG_HTGL - if (up) - miconCntl_SendCmd(0x91); - else - miconCntl_SendCmd(0x90); -#else - if (up) - miconCntl_SendCmd(0x5C); -#endif -} - -/*--------------------------------------------------------------*/ -/* 10Mbps */ -void miconCntl_Eth10M(int up) -{ -#ifdef CONFIG_HTGL - if (up) - miconCntl_SendCmd(0x8F); - else - miconCntl_SendCmd(0x8E); -#else - if (up) - miconCntl_SendCmd(0x5C); -#endif -} - -/*--------------------------------------------------------------*/ -/* */ -void miconCntl_5f(void) -{ - miconCntl_SendCmd(0x5F); - mdelay(100); -} - -/*--------------------------------------------------------------*/ -/* "reboot start" signal */ -void miconCntl_Reboot(void) -{ - miconCntl_SendCmd(0x43); -} - -/*--------------------------------------------------------------*/ -/* Disable watchdog timer */ -void miconCntl_DisWDT(void) -{ - miconCntl_SendCmd(0x41); /* A */ - miconCntl_SendCmd(0x46); /* F */ - miconCntl_SendCmd(0x4A); /* J */ - miconCntl_SendCmd(0x3E); /* > */ - miconCntl_SendCmd(0x56); /* V */ - miconCntl_SendCmd(0x3E); /* > */ - miconCntl_SendCmd(0x5A); /* Z */ - miconCntl_SendCmd(0x56); /* V */ - miconCntl_SendCmd(0x4B); /* K */ -} diff --git a/board/linkstation/ide.c b/board/linkstation/ide.c deleted file mode 100644 index 7b3fe65..0000000 --- a/board/linkstation/ide.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/* ide.c - ide support functions */ - - -#include <common.h> - -#ifdef CONFIG_CMD_IDE -#include <ata.h> -#include <ide.h> -#include <pci.h> - -#define IT8212_PCI_CpuCONTROL 0x5e -#define IT8212_PCI_PciModeCONTROL 0x50 -#define IT8212_PCI_IdeIoCONFIG 0x40 -#define IT8212_PCI_IdeBusSkewCONTROL 0x4c -#define IT8212_PCI_IdeDrivingCURRENT 0x42 - -extern struct pci_controller hose; - -int ide_preinit (void) -{ - int status; - pci_dev_t devbusfn; - int l; - - status = 1; - for (l = 0; l < CONFIG_SYS_IDE_MAXBUS; l++) { - ide_bus_offset[l] = -ATA_STATUS; - } - devbusfn = pci_find_device(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680, 0); - if (devbusfn == -1) - devbusfn = pci_find_device(PCI_VENDOR_ID_ITE,PCI_DEVICE_ID_ITE_8212,0); - if (devbusfn != -1) { - u32 ide_bus_offset32; - - status = 0; - - pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0, - &ide_bus_offset32); - ide_bus_offset[0] = ide_bus_offset32 & 0xfffffffe; - ide_bus_offset[0] = pci_hose_bus_to_phys(&hose, - ide_bus_offset[0] & 0xfffffffe, - PCI_REGION_IO); - if (CONFIG_SYS_IDE_MAXBUS > 1) { - pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2, - (u32 *) &ide_bus_offset[1]); - ide_bus_offset[1] &= 0xfffffffe; - ide_bus_offset[1] = pci_hose_bus_to_phys(&hose, - ide_bus_offset[1] & 0xfffffffe, - PCI_REGION_IO); - } - } - - if (pci_find_device (PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8212, 0) != -1) { - pci_write_config_byte(devbusfn, IT8212_PCI_CpuCONTROL, 0x01); - pci_write_config_byte(devbusfn, IT8212_PCI_PciModeCONTROL, 0x00); - pci_write_config_word(devbusfn, PCI_COMMAND, 0x0047); -#ifdef CONFIG_IT8212_SECONDARY_ENABLE - pci_write_config_word(devbusfn, IT8212_PCI_IdeIoCONFIG, 0xA0F3); -#else - pci_write_config_word(devbusfn, IT8212_PCI_IdeIoCONFIG, 0x8031); -#endif - pci_write_config_dword(devbusfn, IT8212_PCI_IdeBusSkewCONTROL, 0x02040204); -/* __LS_COMMENT__ BUFFALO changed 2004.11.10 changed for EMI */ - pci_write_config_byte(devbusfn, IT8212_PCI_IdeDrivingCURRENT, 0x36); /* 10mA */ -/* pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x09); */ /* 4mA */ -/* pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x12); */ /* 6mA */ -/* pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x24); */ /* 6mA,2mA */ -/* pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x2D); */ /* 8mA,4mA */ - pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x00); - } - - return (status); -} - -void ide_set_reset (int flag) { - return; -} - -#endif /* CONFIG_CMD_IDE */ diff --git a/board/linkstation/linkstation.c b/board/linkstation/linkstation.c deleted file mode 100644 index 75cda86..0000000 --- a/board/linkstation/linkstation.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * linkstation.c - * - * Misc LinkStation specific functions - * - * Copyright (C) 2006 Mihai Georgian u-boot@linuxnotincluded.org.uk - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <version.h> -#include <mpc824x.h> -#include <asm/io.h> -#include <ns16550.h> -#include <netdev.h> - -#ifdef CONFIG_PCI -#include <pci.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -extern void init_AVR_DUART(void); - -int checkboard (void) -{ - char *p; - bd_t *bd = gd->bd; - - init_AVR_DUART(); - - if ((p = getenv ("console_nr")) != NULL) { - unsigned long con_nr = simple_strtoul (p, NULL, 10) & 3; - - bd->bi_baudrate &= ~3; - bd->bi_baudrate |= con_nr & 3; - } - return 0; -} - -phys_size_t initdram (int board_type) -{ - return (get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE)); -} - -/* - * Initialize PCI Devices - */ -#ifdef CONFIG_PCI - -#ifndef CONFIG_PCI_PNP - -static struct pci_config_table pci_linkstation_config_table[] = { - /* vendor, device, class */ - /* bus, dev, func */ - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_ANY_ID, 0x0b, 0, /* AN983B or RTL8110S */ - /* ethernet controller */ - pci_cfgfunc_config_device, { PCI_ETH_IOADDR, - PCI_ETH_MEMADDR, - PCI_COMMAND_IO | - PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER }}, - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_ANY_ID, 0x0c, 0, /* SII680 or IT8211AF */ - /* ide controller */ - pci_cfgfunc_config_device, { PCI_IDE_IOADDR, - PCI_IDE_MEMADDR, - PCI_COMMAND_IO | - PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER }}, - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_ANY_ID, 0x0e, 0, /* D720101 USB controller, 1st USB 1.1 */ - pci_cfgfunc_config_device, { PCI_USB0_IOADDR, - PCI_USB0_MEMADDR, - PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER }}, - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_ANY_ID, 0x0e, 1, /* D720101 USB controller, 2nd USB 1.1 */ - pci_cfgfunc_config_device, { PCI_USB1_IOADDR, - PCI_USB1_MEMADDR, - PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER }}, - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_ANY_ID, 0x0e, 2, /* D720101 USB controller, USB 2.0 */ - pci_cfgfunc_config_device, { PCI_USB2_IOADDR, - PCI_USB2_MEMADDR, - PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER }}, - { } -}; -#endif - -struct pci_controller hose = { -#ifndef CONFIG_PCI_PNP - config_table:pci_linkstation_config_table, -#endif -}; - -void pci_init_board (void) -{ - pci_mpc824x_init (&hose); - - /* Reset USB 1.1 */ - /* Haven't seen any change without these on a HG, maybe it is - * needed on other models */ - out_le32((volatile unsigned*)(PCI_USB0_MEMADDR + 8), 1); - out_le32((volatile unsigned*)(PCI_USB1_MEMADDR + 8), 1); -} -#endif /* CONFIG_PCI */ - -#define UART_DCR 0x80004511 -int board_early_init_f (void) -{ - /* set DUART mode */ - out_8((volatile u8*)UART_DCR, 1); - return 0; -} - -int board_eth_init(bd_t *bis) -{ - return pci_eth_init(bis); -} diff --git a/boards.cfg b/boards.cfg index c602a16..8951bb1 100644 --- a/boards.cfg +++ b/boards.cfg @@ -636,7 +636,6 @@ Active powerpc mpc824x - - cpc45 Active powerpc mpc824x - - cu824 CU824 - Wolfgang Denk wd@denx.de Active powerpc mpc824x - - eXalion eXalion - Torsten Demke torsten.demke@fci.com Active powerpc mpc824x - - hidden_dragon HIDDEN_DRAGON - Yusdi Santoso yusdi_santoso@adaptec.com -Active powerpc mpc824x - - linkstation linkstation_HGLAN linkstation:HGLAN=1 Guennadi Liakhovetski g.liakhovetski@gmx.de Active powerpc mpc824x - - musenki MUSENKI - Jim Thompson jim@musenki.com Active powerpc mpc824x - - mvblue MVBLUE - - Active powerpc mpc824x - - sandpoint Sandpoint8240 - Wolfgang Denk wd@denx.de diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h deleted file mode 100644 index fcd809d..0000000 --- a/include/configs/linkstation.h +++ /dev/null @@ -1,504 +0,0 @@ -/* - * Copyright (C) 2006 Mihai Georgian u-boot@linuxnotincluded.org.uk - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * - * Standard configuration - all models - * 0xFFF00000 boot from flash - * - * Test configuration (boot from RAM using uloader.o) - * LinkStation HD-HLAN and KuroBox Standard - * 0x03F00000 boot from RAM - * LinkStation HD-HGLAN and KuroBox HG - * 0x07F00000 boot from RAM - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 -#endif - -#if 0 -#define DEBUG -#endif - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ - -/*----------------------------------------------------------------------- - * User configurable settings: - * Mandatory settings: - * CONFIG_IPADDR_LS - the IP address of the LinkStation - * CONFIG_SERVERIP_LS - the address of the server for NFS/TFTP/DHCP/BOOTP - * Optional settins: - * CONFIG_NCIP_LS - the adress of the computer running net console - * if not configured, it will be set to - * CONFIG_SERVERIP_LS - */ - - -#define CONFIG_IPADDR_LS 192.168.11.150 -#define CONFIG_SERVERIP_LS 192.168.11.149 - -#if !defined(CONFIG_IPADDR_LS) || !defined(CONFIG_SERVERIP_LS) -#error Both CONFIG_IPADDR_LS and CONFIG_SERVERIP_LS must be defined -#endif - -#if !defined(CONFIG_NCIP_LS) -#define CONFIG_NCIP_LS CONFIG_SERVERIP_LS -#endif - -/*---------------------------------------------------------------------- - * DO NOT CHANGE ANYTHING BELOW, UNLESS YOU KNOW WHAT YOU ARE DOING - *---------------------------------------------------------------------*/ - -#define CONFIG_MPC8245 1 -#define CONFIG_LINKSTATION 1 - -/*--------------------------------------- - * Supported models - * - * LinkStation HDLAN /KuroBox Standard (CONFIG_HLAN) - * LinkStation old model (CONFIG_LAN) - totally untested - * LinkStation HGLAN / KuroBox HG (CONFIG_HGLAN) - * - * Models not supported yet - * TeraStatin (CONFIG_HTGL) - */ - -#if defined(CONFIG_HLAN) || defined(CONFIG_LAN) -#define CONFIG_IDENT_STRING " LinkStation / KuroBox" -#elif defined(CONFIG_HGLAN) -#define CONFIG_IDENT_STRING " LinkStation HG / KuroBox HG" -#elif defined(CONFIG_HTGL) -#define CONFIG_IDENT_STRING " TeraStation" -#else -#error No LinkStation model defined -#endif - -#define CONFIG_BOOTDELAY 5 -#define CONFIG_ZERO_BOOTDELAY_CHECK -#undef CONFIG_BOOT_RETRY_TIME - -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT \ - "Boot in %02d seconds ('s' to stop)...", bootdelay -#define CONFIG_AUTOBOOT_STOP_STR "s" - -#define CONFIG_CMD_IDE -#define CONFIG_CMD_PCI -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_EXT2 - -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_NISDOMAIN -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_NTPSERVER -#define CONFIG_BOOTP_TIMEOFFSET - -#define CONFIG_OF_LIBFDT 1 - -#define OF_STDOUT_PATH "/soc10x/serial@80004600" - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <config_cmd_default.h> - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* Default load address: 8 MB */ - -#define CONFIG_BOOTCOMMAND "run bootcmd1" -#define CONFIG_BOOTARGS "root=/dev/sda1 console=ttyS1,57600 netconsole=@192.168.1.7/eth0,@192.168.1.1/00:50:BF:A4:59:71 rtc-rs5c372.probe=0,0x32 debug" -#define CONFIG_NFSBOOTCOMMAND "bootp;run nfsargs;bootm" - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -#if defined(CONFIG_HLAN) || defined(CONFIG_LAN) -#define UBFILE "share/u-boot/u-boot-hd.flash.bin" -#elif defined(CONFIG_HGLAN) -#define UBFILE "share/u-boot/u-boot-hg.flash.bin" -#elif defined(CONFIG_HTGL) -#define UBFILE "share/u-boot/u-boot-ht.flash.bin" -#else -#error No LinkStation model defined -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "autoload=no\0" \ - "stdin=nc\0" \ - "stdout=nc\0" \ - "stderr=nc\0" \ - "ipaddr="__stringify(CONFIG_IPADDR_LS)"\0" \ - "netmask=255.255.255.0\0" \ - "serverip="__stringify(CONFIG_SERVERIP_LS)"\0" \ - "ncip="__stringify(CONFIG_NCIP_LS)"\0" \ - "netretry=no\0" \ - "nc=setenv stdin nc;setenv stdout nc;setenv stderr nc\0" \ - "ser=setenv stdin serial;setenv stdout serial;setenv stderr serial\0" \ - "ldaddr=800000\0" \ - "hdpart=0:1\0" \ - "hdfile=boot/uImage\0" \ - "hdload=echo Loading ${hdpart}:${hdfile};ext2load ide ${hdpart} ${ldaddr} ${hdfile};ext2load ide ${hdpart} 7f0000 boot/kuroboxHG.dtb\0" \ - "boothd=setenv bootargs " CONFIG_BOOTARGS ";bootm ${ldaddr} - 7f0000\0" \ - "hdboot=run hdload;run boothd\0" \ - "flboot=setenv bootargs root=/dev/hda1;bootm ffc00000\0" \ - "emboot=setenv bootargs root=/dev/ram0;bootm ffc00000\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \ - "bootretry=30\0" \ - "bootcmd1=run hdboot;run flboot\0" \ - "bootcmd2=run flboot\0" \ - "bootcmd3=run emboot\0" \ - "writeng=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4e474e47 1;cp.b 800000 fff70000 4\0" \ - "writeok=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4f4b4f4b 1;cp.b 800000 fff70000 4\0" \ - "ubpart=0:3\0" \ - "ubfile="UBFILE"\0" \ - "ubload=echo Loading ${ubpart}:${ubfile};ext2load ide ${ubpart} ${ldaddr} ${ubfile}\0" \ - "ubsaddr=fff00000\0" \ - "ubeaddr=fff2ffff\0" \ - "ubflash=protect off ${ubsaddr} ${ubeaddr};era ${ubsaddr} ${ubeaddr};cp.b ${ldaddr} ${ubsaddr} ${filesize};cmp.b ${ldaddr} ${ubsaddr} ${filesize}\0" \ - "upgrade=run ubload ubflash\0" - -/*----------------------------------------------------------------------- - * PCI stuff - */ -#define CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE -/* Verified: CONFIG_PCI_PNP doesn't work */ -#undef CONFIG_PCI_PNP -#define CONFIG_PCI_SCAN_SHOW - -#ifndef CONFIG_PCI_PNP -/* Keep the following defines in sync with the BAT mappings */ - -#define PCI_ETH_IOADDR 0xbfff00 -#define PCI_ETH_MEMADDR 0xbffffc00 -#define PCI_IDE_IOADDR 0xbffed0 -#define PCI_IDE_MEMADDR 0xbffffb00 -#define PCI_USB0_IOADDR 0 -#define PCI_USB0_MEMADDR 0xbfffe000 -#define PCI_USB1_IOADDR 0 -#define PCI_USB1_MEMADDR 0xbfffd000 -#define PCI_USB2_IOADDR 0 -#define PCI_USB2_MEMADDR 0xbfffcf00 - -#endif - -/*----------------------------------------------------------------------- - * Ethernet stuff - */ - -#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) -#define CONFIG_TULIP -#define CONFIG_TULIP_USE_IO -#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) -#define CONFIG_RTL8169 -#endif - -#define CONFIG_NET_RETRY_COUNT 5 - -#define CONFIG_NETCONSOLE - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -#define CONFIG_SYS_FLASH_BASE 0xFFC00000 -#define CONFIG_SYS_FLASH_SIZE 0x00400000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 -#define CONFIG_SYS_EUMB_ADDR 0x80000000 -#define CONFIG_SYS_PCI_MEM_ADDR 0xB0000000 -#define CONFIG_SYS_MISC_REGION_ADDR 0xFE000000 - -#define CONFIG_SYS_MONITOR_LEN 0x00040000 /* 256 kB */ -#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */ - -/* Maximum amount of RAM */ -#if defined(CONFIG_HLAN) || defined(CONFIG_LAN) -#define CONFIG_SYS_MAX_RAM_SIZE 0x04000000 /* 64MB of SDRAM */ -#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) -#define CONFIG_SYS_MAX_RAM_SIZE 0x08000000 /* 128MB of SDRAM */ -#else -#error Unknown LinkStation type -#endif - -/*----------------------------------------------------------------------- - * Change CONFIG_SYS_TEXT_BASE in bord/linkstation/config.mk to get a RAM build - * - * RAM based builds are for testing purposes. A Linux module, uloader.o, - * exists to load U-Boot and pass control to it - * - * Always do "make clean" after changing the build type - */ -#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_RAMBOOT -#endif - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ -#if 1 /* RAM is available when the first C function is called */ -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE - 0x1000) -#else -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#endif -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -/*---------------------------------------------------------------------- - * Serial configuration - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 57600 - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4600) /* Console port */ -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4500) /* AVR port */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - * For the detail description refer to the MPC8245 user's manual. - * - * Unless indicated otherwise, the values are - * taken from the orignal Linkstation boot code - * - * Most of the low level configuration setttings are normally used - * in arch/powerpc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation. - * Low level initialisation is done in board/linkstation/early_init.S - * The values below are included for reference purpose only - */ - -/* FIXME: 32.768 MHz is the crystal frequency but */ -/* the real frequency is lower by about 0.75% */ -#define CONFIG_SYS_CLK_FREQ 32768000 - -/* Bit-field values for MCCR1. */ -#define CONFIG_SYS_ROMNAL 0 -#define CONFIG_SYS_ROMFAL 11 - -#define CONFIG_SYS_BANK0_ROW 2 /* Only bank 0 used: 13 x n x 4 */ -#define CONFIG_SYS_BANK1_ROW 0 -#define CONFIG_SYS_BANK2_ROW 0 -#define CONFIG_SYS_BANK3_ROW 0 -#define CONFIG_SYS_BANK4_ROW 0 -#define CONFIG_SYS_BANK5_ROW 0 -#define CONFIG_SYS_BANK6_ROW 0 -#define CONFIG_SYS_BANK7_ROW 0 - -/* Bit-field values for MCCR2. */ -#define CONFIG_SYS_TSWAIT 0 -#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) -#define CONFIG_SYS_REFINT 0x15e0 -#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) -#define CONFIG_SYS_REFINT 0x1580 -#endif - -/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */ -#define CONFIG_SYS_BSTOPRE 0x91c - -/* Bit-field values for MCCR3. */ -#define CONFIG_SYS_REFREC 7 - -/* Bit-field values for MCCR4. */ -#define CONFIG_SYS_PRETOACT 2 -#define CONFIG_SYS_ACTTOPRE 2 /* Original value was 2 */ -#define CONFIG_SYS_ACTORW 2 -#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) -#define CONFIG_SYS_SDMODE_CAS_LAT 2 /* For 100MHz bus */ -/*#define CONFIG_SYS_SDMODE_BURSTLEN 3*/ -#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) -#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* For 133MHz bus */ -/*#define CONFIG_SYS_SDMODE_BURSTLEN 2*/ -#endif -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 -#define CONFIG_SYS_EXTROM 1 /* Original setting but there is no EXTROM */ -#define CONFIG_SYS_REGDIMM 0 -#define CONFIG_SYS_DBUS_SIZE2 1 -#define CONFIG_SYS_SDMODE_WRAP 0 - -#define CONFIG_SYS_PGMAX 0x32 /* All boards use this setting. Original 0x92 */ -#define CONFIG_SYS_SDRAM_DSCD 0x30 - -/* Memory bank settings. - * Only bits 20-29 are actually used from these vales to set the - * start/end addresses. The upper two bits will always be 0, and the lower - * 20 bits will be 0x00000 for a start address, or 0xfffff for an end - * address. Refer to the MPC8240 book. - */ - -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x3ff00000 -#define CONFIG_SYS_BANK1_END 0x3fffffff -#define CONFIG_SYS_BANK1_ENABLE 0 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x3ff00000 -#define CONFIG_SYS_BANK4_END 0x3fffffff -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x3ff00000 -#define CONFIG_SYS_BANK5_END 0x3fffffff -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x3ff00000 -#define CONFIG_SYS_BANK6_END 0x3fffffff -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x3ff00000 -#define CONFIG_SYS_BANK7_END 0x3fffffff -#define CONFIG_SYS_BANK7_ENABLE 0 - -#define CONFIG_SYS_ODCR 0x15 - -/*---------------------------------------------------------------------- - * Initial BAT mappings - */ - -/* NOTES: - * 1) GUARDED and WRITETHROUGH not allowed in IBATS - * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT - */ - -/* SDRAM */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* EUMB: 1MB of address space */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_EUMB_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_EUMB_ADDR | BATU_BL_1M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT1L (CONFIG_SYS_IBAT1L | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* PCI Mem: 256MB of address space */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI_MEM_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI_MEM_ADDR | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_IBAT2L | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -/* PCI and local ROM/Flash: last 32MB of address space */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_ADDR | BATU_BL_32M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT3L (CONFIG_SYS_IBAT3L | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - * - * FIXME: This doesn't appear to be true for the newer kernels - * which map more that 8 MB - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ - -#undef CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 72 /* Max number of sectors per flash */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 12000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ - -#define CONFIG_ENV_IS_IN_FLASH -/* - * The original LinkStation flash organisation uses - * 448 kB (0xFFF00000 - 0xFFF6FFFF) for the boot loader - * We use the last sector of this area to store the environment - * which leaves max. 384 kB for the U-Boot itself - */ -#define CONFIG_ENV_ADDR 0xFFF60000 -#define CONFIG_ENV_SIZE 0x00010000 -#define CONFIG_ENV_SECT_SIZE 0x00010000 - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * IDE/ATA definitions - */ -#undef CONFIG_IDE_LED /* No IDE LED */ -#define CONFIG_IDE_RESET /* no reset for ide supported */ -#define CONFIG_IDE_PREINIT /* check for units */ -#define CONFIG_LBA48 /* 48 bit LBA supported */ - -#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) || defined(CONFIG_HGLAN) -#define CONFIG_SYS_IDE_MAXBUS 1 /* Scan only 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* Only 1 drive per IDE bus */ -#elif defined(CONFIG_HGTL) -#define CONFIG_SYS_IDE_MAXBUS 2 /* Max. 2 IDE busses */ -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ -#else -#error Config IDE: Unknown LinkStation type -#endif - -#define CONFIG_SYS_ATA_BASE_ADDR 0 - -#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* Offset for data I/O */ -#define CONFIG_SYS_ATA_REG_OFFSET 0 /* Offset for normal registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0 /* Offset for alternate registers */ - -/*----------------------------------------------------------------------- - * Partitions and file system - */ -#define CONFIG_DOS_PARTITION - -#endif /* __CONFIG_H */