On Mon, Dec 12, 2022 at 10:27:41AM +0100, Dario Binacchi wrote:
Hi Roger,
On Mon, Dec 12, 2022 at 10:12 AM Roger Quadros rogerq@kernel.org wrote:
Hi Dario,
On 11/12/2022 15:56, Dario Binacchi wrote:
Hi Roger,
On Fri, Nov 25, 2022 at 1:38 PM Roger Quadros rogerq@kernel.org wrote:
Hi Michael,
On 08/11/2022 11:26, Michael Nazzareno Trimarchi wrote:
Hi Roger
On Fri, Nov 4, 2022 at 2:27 PM Roger Quadros rogerq@kernel.org wrote:
Hi,
On 11/10/2022 14:49, Roger Quadros wrote: > Hi, > > This series adds driver model support for rawnand: omap_gpmc > and omap_elm drivers. > > This will enable the driver to be used on K2/K3 platforms as well.
Any comments on patches 5 and later? Thanks
We will try to close this week.
Could you please give your comments on the last few patches. Thanks!
cheers, -roger
Michael
cheers, -roger
> > cheers, > -roger > > Roger Quadros (14): > mtd: rawnand: omap_gpmc: Deprecate asm/arch/mem.h > mtd: rawnand: omap_gpmc: Enable build for K2/K3 platforms > mtd: rawnand: omap_gpmc: Fix build warning on 64-bit platforms > mtd: rawnand: omap_gpmc: Optimize NAND reads > mtd: rawnand: omap_gpmc: Fix BCH6/16 HW based correction > mtd: rawnand: nand_base: Allow base driver to be used in SPL without > nand_bbt > mtd: rawnand: nand_spl_loaders: Fix cast type build warning > mtd: rawnand: omap_gpmc: Reduce .bss usage > dt-bindings: mtd: Add ti,gpmc-nand DT binding documentation > mtd: rawnand: omap_gpmc: support u-boot driver model > mtd: rawnand: omap_gpmc: Add SPL NAND support > mtd: rawnand: omap_gpmc: Enable SYS_NAND_PAGE_COUNT for OMAP_GPMC > dt-bindings: mtd: Add ti,elm DT binding documentation > mtd: rawnand: omap_elm: u-boot driver model support > > doc/device-tree-bindings/mtd/ti,elm.yaml | 72 +++ > .../mtd/ti,gpmc-nand.yaml | 129 +++++ > drivers/mtd/nand/raw/Kconfig | 11 +- > drivers/mtd/nand/raw/Makefile | 2 +- > drivers/mtd/nand/raw/nand_base.c | 18 +- > drivers/mtd/nand/raw/nand_spl_loaders.c | 2 +- > drivers/mtd/nand/raw/omap_elm.c | 33 +- > .../mtd => drivers/mtd/nand/raw}/omap_elm.h | 6 + > drivers/mtd/nand/raw/omap_gpmc.c | 500 +++++++++++++----- > 9 files changed, 637 insertions(+), 136 deletions(-) > create mode 100644 doc/device-tree-bindings/mtd/ti,elm.yaml > create mode 100644 doc/device-tree-bindings/mtd/ti,gpmc-nand.yaml > rename {include/linux/mtd => drivers/mtd/nand/raw}/omap_elm.h (97%) >
I tried to merge your whole series but after the second fix and the third time the CI/CD pipeline failed
Do you have the link to the failure?
These are the CI/CD pipelines links: https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/jobs/540827 https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/jobs/540876 but I think you don't have permission to access them.
Note that under CI settings you can make your pipeline visible to all. It's just not the default for some reason and I'm not sure we can change it globally.