Xilinx is using standard mtd partition layout for quite a long time. It is used for testing purpose on evaluation boards. Also #address/size-cells shouldn't be present without nodes which should use them that's why move them from zynq-7000.dtsi to nand/nor nodes directly.
The patch was tested on zc706 and zedboard(with also increasing max frequency and rx bus width).
Signed-off-by: Michal Simek michal.simek@amd.com ---
arch/arm/dts/bitmain-antminer-s9.dts | 2 ++ arch/arm/dts/zynq-7000.dtsi | 4 ---- arch/arm/dts/zynq-zc702.dts | 25 ++++++++++++++++++++++++ arch/arm/dts/zynq-zc706.dts | 25 ++++++++++++++++++++++++ arch/arm/dts/zynq-zc770-xm010.dts | 25 ++++++++++++++++++++++++ arch/arm/dts/zynq-zc770-xm011.dts | 19 ++++++++++++++++++ arch/arm/dts/zynq-zc770-xm012.dts | 25 ++++++++++++++++++++++++ arch/arm/dts/zynq-zc770-xm013.dts | 25 ++++++++++++++++++++++++ arch/arm/dts/zynq-zed.dts | 29 +++++++++++++++++++++++++++- 9 files changed, 174 insertions(+), 5 deletions(-)
diff --git a/arch/arm/dts/bitmain-antminer-s9.dts b/arch/arm/dts/bitmain-antminer-s9.dts index 0228b4b30e5b..f5ad95a276b6 100644 --- a/arch/arm/dts/bitmain-antminer-s9.dts +++ b/arch/arm/dts/bitmain-antminer-s9.dts @@ -52,6 +52,8 @@
&nfc0 { status = "okay"; + #address-cells = <1>; + #size-cells = <0>; nand@0 { reg = <0>; }; diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi index fb61fe98e3de..f8c786ab0b7b 100644 --- a/arch/arm/dts/zynq-7000.dtsi +++ b/arch/arm/dts/zynq-7000.dtsi @@ -306,15 +306,11 @@ compatible = "arm,pl353-nand-r2p1"; reg = <0 0 0x1000000>; status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; }; nor0: flash@1,0 { status = "disabled"; compatible = "cfi-flash"; reg = <1 0 0x2000000>; - #address-cells = <1>; - #size-cells = <1>; }; };
diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts index 8d47f24b757b..0106d7bb1778 100644 --- a/arch/arm/dts/zynq-zc702.dts +++ b/arch/arm/dts/zynq-zc702.dts @@ -406,6 +406,31 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <50000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; + partition@c00000 { + label = "qspi-bitstream"; + reg = <0xc00000 0x400000>; + }; + }; }; };
diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts index 18963a395156..ceea982546e8 100644 --- a/arch/arm/dts/zynq-zc706.dts +++ b/arch/arm/dts/zynq-zc706.dts @@ -317,6 +317,31 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <50000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; + partition@c00000 { + label = "qspi-bitstream"; + reg = <0xc00000 0x400000>; + }; + }; }; };
diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts index 17680d7f8ec8..199384bec967 100644 --- a/arch/arm/dts/zynq-zc770-xm010.dts +++ b/arch/arm/dts/zynq-zc770-xm010.dts @@ -69,6 +69,31 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <50000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; + partition@c00000 { + label = "qspi-bitstream"; + reg = <0xc00000 0x400000>; + }; + }; }; };
diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts index d1e971254e51..f9a086fe66d3 100644 --- a/arch/arm/dts/zynq-zc770-xm011.dts +++ b/arch/arm/dts/zynq-zc770-xm011.dts @@ -49,8 +49,27 @@
&nfc0 { status = "okay"; + #address-cells = <1>; + #size-cells = <0>; nand@0 { reg = <0>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "nand-fsbl-uboot"; + reg = <0x0 0x1000000>; + }; + partition@1000000 { + label = "nand-linux"; + reg = <0x1000000 0x2000000>; + }; + partition@3000000 { + label = "nand-rootfs"; + reg = <0x3000000 0x200000>; + }; + }; }; };
diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts index 6e36634e3d4e..24520e7d3965 100644 --- a/arch/arm/dts/zynq-zc770-xm012.dts +++ b/arch/arm/dts/zynq-zc770-xm012.dts @@ -56,6 +56,31 @@ &nor0 { status = "okay"; bank-width = <1>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "nor-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { + label = "nor-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { + label = "nor-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { + label = "nor-rootfs"; + reg = <0x620000 0x5e0000>; + }; + partition@c00000 { + label = "nor-bitstream"; + reg = <0xc00000 0x400000>; + }; + }; };
&smcc { diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts index 582aa1f1b873..add75999f47a 100644 --- a/arch/arm/dts/zynq-zc770-xm013.dts +++ b/arch/arm/dts/zynq-zc770-xm013.dts @@ -69,6 +69,31 @@ spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <50000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; + partition@c00000 { + label = "qspi-bitstream"; + reg = <0xc00000 0x400000>; + }; + }; }; };
diff --git a/arch/arm/dts/zynq-zed.dts b/arch/arm/dts/zynq-zed.dts index 5320b4b233ae..70bc41822e36 100644 --- a/arch/arm/dts/zynq-zed.dts +++ b/arch/arm/dts/zynq-zed.dts @@ -55,8 +55,35 @@ flash@0 { compatible = "spansion,s25fl256s1", "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <30000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; m25p,fast-read; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@100000 { + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@600000 { + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@620000 { + label = "qspi-rootfs"; + reg = <0x620000 0x5e0000>; + }; + partition@c00000 { + label = "qspi-bitstream"; + reg = <0xc00000 0x400000>; + }; + }; }; };