Hi Sandeep,
Le 08/09/2011 17:16, s-paulraj@ti.com a écrit :
Albert,
Please pull u-boot-ti/master. I checked all the patches for checkpatch errors and fixed all the warnings that i could. Some cannot be fixed. Sanjeev's patches update thr GPIO for OMAP. The GPIO on OMAP was causing issues which now seem to be fixed.
Regards, Sandeep
The following changes since commit 63cf97e825b8d821e2d3d6d6c6604634ac24810a: Sanjeev Premi (1): omap3: beagle: Fix build warning
are available in the git repository at:
git://git.denx.de/u-boot-ti.git master
Aneesh V (4): omap4: factor out common part from board config headers omap4: make SDRAM init work for ES1.0 silicon omap4: IO settings omap4: fix pad configuration settings for SDP and Panda
Howard D. Gray (1): ARMV7: OMAP3: Add 37xx ESx revision numbers.
Jason Kridner (1): led: remove camel casing of led identifiers globally
Joel A Fernandes (1): OMAP: Add function to get state of a GPIO output
Michael Jones (2): ARMV7: OMAP: Write more than 1 byte at a time in i2c_write ARMV7: OMAP: I2C driver: cosmetic: make checkpatch-compatible
Nagabhushana Netagunte (3): da830: modify the U-Boot prompt string da830: enable SPI flash boot mode da830: modify the MEMTEST start and end address
Sandeep Paulraj (1): OMAP3 Beagle: Minor config cleanup
Sanjeev Premi (3): omap: gpio: Use generic API omap: gpio: generic changes after changing API omap: gpio: Adapt board files to use generic API
arch/arm/cpu/arm920t/ep93xx/led.c | 24 ++-- arch/arm/cpu/arm926ejs/at91/led.c | 12 +- arch/arm/cpu/armv7/omap-common/gpio.c | 105 ++++++++++-- arch/arm/cpu/armv7/omap3/sys_info.c | 13 ++- arch/arm/cpu/armv7/omap4/board.c | 62 +++++++ arch/arm/cpu/armv7/omap4/clocks.c | 5 +- arch/arm/cpu/armv7/omap4/emif.c | 72 +------- arch/arm/cpu/armv7/omap4/sdram_elpida.c | 24 ++-- arch/arm/include/asm/arch-omap3/omap3.h | 10 + arch/arm/include/asm/arch-omap4/emif.h | 23 +--- arch/arm/include/asm/arch-omap4/omap4.h | 45 +++++- arch/arm/include/asm/omap_gpio.h | 13 -- arch/arm/lib/board.c | 32 ++-- board/atmel/at91rm9200ek/led.c | 12 +- board/cm_t35/leds.c | 10 +- board/comelit/dig297/dig297.c | 12 +- board/eukrea/cpu9260/led.c | 48 +++--- board/isee/igep0020/igep0020.c | 12 +- board/logicpd/zoom2/debug_board.c | 10 +- board/logicpd/zoom2/led.c | 66 ++++---- board/logicpd/zoom2/zoom2.c | 10 +- board/overo/overo.c | 54 +++--- board/ti/beagle/beagle.c | 44 +++--- board/ti/beagle/led.c | 26 ++-- board/ti/evm/evm.c | 12 +- board/ti/panda/panda_mux_data.h | 41 ++--- board/ti/sdp4430/sdp4430_mux_data.h | 9 +- common/cmd_led.c | 8 +- doc/README.omap3 | 20 +- drivers/i2c/omap24xx_i2c.c | 241 +++++++++++++--------------- include/configs/da830evm.h | 17 +- include/configs/omap3_beagle.h | 1 - include/configs/omap4_common.h | 275 +++++++++++++++++++++++++++++++ include/configs/omap4_panda.h | 244 +-------------------------- include/configs/omap4_sdp4430.h | 245 +-------------------------- include/status_led.h | 32 ++-- 36 files changed, 892 insertions(+), 997 deletions(-) create mode 100644 include/configs/omap4_common.h
Rebasing and applying locally right now. What are these warnings that cannot be eliminated?
Amicalement,