Enable driver model support for FEC ethernet which allows us to remove the iomux and board_eth_init function. Replace the toggling of the ethernet phy reset with dt configuration.
Enable driver model support for PCI which allows us to remove the eth1000_initialize() call. Additionally enable PCI_INIT_R to scan for PCI devices on init such as the e1000 that is present on the GW552x.
Convert board_pci_fixup to use dm callback and remove pcidisable env variable which is not supported for DM_PCI and thus leave PCI always enabled during init.
Signed-off-by: Tim Harvey tharvey@gateworks.com --- v2: rebase --- arch/arm/dts/imx6qdl-gw51xx.dtsi | 2 + arch/arm/dts/imx6qdl-gw52xx.dtsi | 2 + arch/arm/dts/imx6qdl-gw53xx.dtsi | 3 + arch/arm/dts/imx6qdl-gw54xx.dtsi | 3 + arch/arm/dts/imx6qdl-gw560x.dtsi | 2 + arch/arm/dts/imx6qdl-gw5903.dtsi | 3 + arch/arm/dts/imx6qdl-gw5904.dtsi | 3 + arch/arm/dts/imx6qdl-gw5907.dtsi | 2 + arch/arm/dts/imx6qdl-gw5910.dtsi | 3 + arch/arm/dts/imx6qdl-gw5912.dtsi | 4 + arch/arm/dts/imx6qdl-gw5913.dtsi | 3 + board/gateworks/gw_ventana/common.h | 1 - board/gateworks/gw_ventana/gw_ventana.c | 99 ++++--------------------- configs/gwventana_emmc_defconfig | 5 ++ configs/gwventana_gw5904_defconfig | 5 ++ configs/gwventana_nand_defconfig | 5 ++ include/configs/gw_ventana.h | 10 --- 17 files changed, 61 insertions(+), 94 deletions(-)
diff --git a/arch/arm/dts/imx6qdl-gw51xx.dtsi b/arch/arm/dts/imx6qdl-gw51xx.dtsi index 2a21c6731e..7e28463084 100644 --- a/arch/arm/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/dts/imx6qdl-gw51xx.dtsi @@ -129,6 +129,8 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + phy-reset-duration = <10>; + phy-reset-post-delay = <100>; status = "okay"; };
diff --git a/arch/arm/dts/imx6qdl-gw52xx.dtsi b/arch/arm/dts/imx6qdl-gw52xx.dtsi index 6eedf8d40d..f1d9ba1fac 100644 --- a/arch/arm/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/dts/imx6qdl-gw52xx.dtsi @@ -195,6 +195,8 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + phy-reset-duration = <10>; + phy-reset-post-delay = <100>; status = "okay"; };
diff --git a/arch/arm/dts/imx6qdl-gw53xx.dtsi b/arch/arm/dts/imx6qdl-gw53xx.dtsi index 9deec7e352..172a45ba17 100644 --- a/arch/arm/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/dts/imx6qdl-gw53xx.dtsi @@ -188,6 +188,8 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + phy-reset-duration = <10>; + phy-reset-post-delay = <100>; status = "okay"; };
@@ -597,6 +599,7 @@ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 >; };
diff --git a/arch/arm/dts/imx6qdl-gw54xx.dtsi b/arch/arm/dts/imx6qdl-gw54xx.dtsi index a30ba4848e..e09fad6068 100644 --- a/arch/arm/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/dts/imx6qdl-gw54xx.dtsi @@ -225,6 +225,8 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + phy-reset-duration = <10>; + phy-reset-post-delay = <100>; status = "okay"; };
@@ -675,6 +677,7 @@ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 >; };
diff --git a/arch/arm/dts/imx6qdl-gw560x.dtsi b/arch/arm/dts/imx6qdl-gw560x.dtsi index 0786b0d546..bfe65fd3c0 100644 --- a/arch/arm/dts/imx6qdl-gw560x.dtsi +++ b/arch/arm/dts/imx6qdl-gw560x.dtsi @@ -279,6 +279,8 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + phy-reset-duration = <10>; + phy-reset-post-delay = <100>; status = "okay"; };
diff --git a/arch/arm/dts/imx6qdl-gw5903.dtsi b/arch/arm/dts/imx6qdl-gw5903.dtsi index 78f9ec90b7..6ebf6aef2f 100644 --- a/arch/arm/dts/imx6qdl-gw5903.dtsi +++ b/arch/arm/dts/imx6qdl-gw5903.dtsi @@ -223,6 +223,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + phy-reset-duration = <10>; + phy-reset-post-delay = <100>; status = "okay"; };
diff --git a/arch/arm/dts/imx6qdl-gw5904.dtsi b/arch/arm/dts/imx6qdl-gw5904.dtsi index 5b7bd56932..9adbd728dc 100644 --- a/arch/arm/dts/imx6qdl-gw5904.dtsi +++ b/arch/arm/dts/imx6qdl-gw5904.dtsi @@ -200,6 +200,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + phy-reset-duration = <10>; + phy-reset-post-delay = <100>; status = "okay";
fixed-link { diff --git a/arch/arm/dts/imx6qdl-gw5907.dtsi b/arch/arm/dts/imx6qdl-gw5907.dtsi index c8b29246b7..58f73a141e 100644 --- a/arch/arm/dts/imx6qdl-gw5907.dtsi +++ b/arch/arm/dts/imx6qdl-gw5907.dtsi @@ -131,6 +131,8 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + phy-reset-duration = <10>; + phy-reset-post-delay = <100>; status = "okay"; };
diff --git a/arch/arm/dts/imx6qdl-gw5910.dtsi b/arch/arm/dts/imx6qdl-gw5910.dtsi index 248e077a56..446c1043a7 100644 --- a/arch/arm/dts/imx6qdl-gw5910.dtsi +++ b/arch/arm/dts/imx6qdl-gw5910.dtsi @@ -146,6 +146,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + phy-reset-duration = <10>; + phy-reset-post-delay = <100>; status = "okay"; };
diff --git a/arch/arm/dts/imx6qdl-gw5912.dtsi b/arch/arm/dts/imx6qdl-gw5912.dtsi index 7593872c07..88234a6f13 100644 --- a/arch/arm/dts/imx6qdl-gw5912.dtsi +++ b/arch/arm/dts/imx6qdl-gw5912.dtsi @@ -141,6 +141,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + phy-reset-duration = <10>; + phy-reset-post-delay = <100>; status = "okay"; };
@@ -426,6 +429,7 @@ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 >; };
diff --git a/arch/arm/dts/imx6qdl-gw5913.dtsi b/arch/arm/dts/imx6qdl-gw5913.dtsi index 9fae4cccd7..f4c2b2189f 100644 --- a/arch/arm/dts/imx6qdl-gw5913.dtsi +++ b/arch/arm/dts/imx6qdl-gw5913.dtsi @@ -121,6 +121,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + phy-reset-duration = <10>; + phy-reset-post-delay = <100>; status = "okay"; };
diff --git a/board/gateworks/gw_ventana/common.h b/board/gateworks/gw_ventana/common.h index d73850c5b9..813f7d9f56 100644 --- a/board/gateworks/gw_ventana/common.h +++ b/board/gateworks/gw_ventana/common.h @@ -11,7 +11,6 @@ #include "ventana_eeprom.h"
/* GPIO's common to all baseboards */ -#define GP_PHY_RST IMX_GPIO_NR(1, 30) #define GP_RS232_EN IMX_GPIO_NR(2, 11) #define GP_MSATA_SEL IMX_GPIO_NR(2, 8)
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 5237f2dac4..1ed9c1a39f 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -31,7 +31,6 @@ #include <linux/ctype.h> #include <miiphy.h> #include <mtd_node.h> -#include <netdev.h> #include <pci.h> #include <linux/delay.h> #include <linux/libfdt.h> @@ -54,42 +53,6 @@ DECLARE_GLOBAL_DATA_PTR; struct ventana_board_info ventana_info; static int board_type;
-/* ENET */ -static iomux_v3_cfg_t const enet_pads[] = { - IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL | - MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK | - MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)), - IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | - MUX_PAD_CTRL(ENET_PAD_CTRL)), - /* PHY nRST */ - IOMUX_PADS(PAD_ENET_TXD0__GPIO1_IO30 | DIO_PAD_CFG), -}; - -static void setup_iomux_enet(int gpio) -{ - SETUP_IOMUX_PADS(enet_pads); - - /* toggle PHY_RST# */ - gpio_request(gpio, "phy_rst#"); - gpio_direction_output(gpio, 0); - mdelay(10); - gpio_set_value(gpio, 1); - mdelay(100); -} - #ifdef CONFIG_USB_EHCI_MX6 /* toggle USB_HUB_RST# for boards that have it; it is not defined in dt */ int board_ehci_hcd_init(int port) @@ -195,40 +158,7 @@ int mv88e61xx_hw_reset(struct phy_device *phydev) } #endif // CONFIG_MV88E61XX_SWITCH
-int board_eth_init(struct bd_info *bis) -{ -#ifdef CONFIG_FEC_MXC - struct ventana_board_info *info = &ventana_info; - - if (test_bit(EECONFIG_ETH0, info->config)) { - setup_iomux_enet(GP_PHY_RST); - cpu_eth_init(bis); - } -#endif - -#ifdef CONFIG_E1000 - e1000_initialize(bis); -#endif - -#ifdef CONFIG_CI_UDC - /* For otg ethernet*/ - usb_eth_initialize(bis); -#endif - - /* default to the first detected enet dev */ - if (!env_get("ethprime")) { - struct eth_device *dev = eth_get_dev_by_index(0); - if (dev) { - env_set("ethprime", dev->name); - printf("set ethprime to %s\n", env_get("ethprime")); - } - } - - return 0; -} - #if defined(CONFIG_VIDEO_IPUV3) - static void enable_hdmi(struct display_info_t const *dev) { imx_enable_hdmi_phy(); @@ -427,7 +357,6 @@ int power_init_board(void) return 0; }
-#if defined(CONFIG_CMD_PCI) int imx6_pcie_toggle_reset(void) { if (board_type < GW_UNKNOWN) { @@ -448,6 +377,7 @@ int imx6_pcie_toggle_reset(void) #define MAX_PCI_DEVS 32 struct pci_dev { pci_dev_t devfn; + struct udevice *dev; unsigned short vendor; unsigned short device; unsigned short class; @@ -458,18 +388,21 @@ struct pci_dev pci_devs[MAX_PCI_DEVS]; int pci_devno; int pci_bridgeno;
-void board_pci_fixup_dev(struct pci_controller *hose, pci_dev_t dev, - unsigned short vendor, unsigned short device, - unsigned short class) +void board_pci_fixup_dev(struct udevice *bus, struct udevice *udev) { - int i; - u32 dw; + struct pci_child_plat *pdata = dev_get_parent_plat(udev); struct pci_dev *pdev = &pci_devs[pci_devno++]; + unsigned short vendor = pdata->vendor; + unsigned short device = pdata->device; + unsigned int class = pdata->class; + pci_dev_t dev = dm_pci_get_bdf(udev); + int i;
debug("%s: %02d:%02d.%02d: %04x:%04x\n", __func__, PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev), vendor, device);
/* store array of devs for later use in device-tree fixup */ + pdev->dev = udev; pdev->devfn = dev; pdev->vendor = vendor; pdev->device = device; @@ -496,19 +429,19 @@ void board_pci_fixup_dev(struct pci_controller *hose, pci_dev_t dev, if (vendor == PCI_VENDOR_ID_PLX && (device & 0xfff0) == 0x8600 && PCI_DEV(dev) == 0 && PCI_FUNC(dev) == 0) { + ulong val; debug("configuring PLX 860X downstream PERST#\n"); - pci_hose_read_config_dword(hose, dev, 0x62c, &dw); - dw |= 0xaaa8; /* GPIO1-7 outputs */ - pci_hose_write_config_dword(hose, dev, 0x62c, dw); + pci_bus_read_config(bus, dev, 0x62c, &val, PCI_SIZE_32); + val |= 0xaaa8; /* GPIO1-7 outputs */ + pci_bus_write_config(bus, dev, 0x62c, val, PCI_SIZE_32);
- pci_hose_read_config_dword(hose, dev, 0x644, &dw); - dw |= 0xfe; /* GPIO1-7 output high */ - pci_hose_write_config_dword(hose, dev, 0x644, dw); + pci_bus_read_config(bus, dev, 0x644, &val, PCI_SIZE_32); + val |= 0xfe; /* GPIO1-7 output high */ + pci_bus_write_config(bus, dev, 0x644, val, PCI_SIZE_32);
mdelay(100); } } -#endif /* CONFIG_CMD_PCI */
#ifdef CONFIG_SERIAL_TAG /* diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig index d5270c5232..c2d4ad3b5d 100644 --- a/configs/gwventana_emmc_defconfig +++ b/configs/gwventana_emmc_defconfig @@ -34,6 +34,7 @@ CONFIG_USE_PREBOOT=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y +CONFIG_PCI_INIT_R=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_FIT_IMAGE_TINY=y @@ -86,9 +87,13 @@ CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_USDHC=y CONFIG_MTD=y CONFIG_PHYLIB=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y +CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PCI=y +CONFIG_DM_PCI=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_DM_REGULATOR=y diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig index 091bf30c3b..3d349818cd 100644 --- a/configs/gwventana_gw5904_defconfig +++ b/configs/gwventana_gw5904_defconfig @@ -34,6 +34,7 @@ CONFIG_USE_PREBOOT=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y +CONFIG_PCI_INIT_R=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_FIT_IMAGE_TINY=y @@ -90,9 +91,13 @@ CONFIG_MV88E61XX_SWITCH=y CONFIG_MV88E61XX_CPU_PORT=5 CONFIG_MV88E61XX_PHY_PORTS=0xf CONFIG_MV88E61XX_FIXED_PORTS=0x0 +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y +CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PCI=y +CONFIG_DM_PCI=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_DM_REGULATOR=y diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig index 0ccd3e9dfd..2bb9a21585 100644 --- a/configs/gwventana_nand_defconfig +++ b/configs/gwventana_nand_defconfig @@ -34,6 +34,7 @@ CONFIG_USE_PREBOOT=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y +CONFIG_PCI_INIT_R=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_FIT_IMAGE_TINY=y @@ -92,9 +93,13 @@ CONFIG_MTD_RAW_NAND=y CONFIG_NAND_MXS=y CONFIG_NAND_MXS_DT=y CONFIG_PHYLIB=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y +CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PCI=y +CONFIG_DM_PCI=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_DM_REGULATOR=y diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 5754b6aef0..4f2f323b77 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -65,8 +65,6 @@ * PCI express */ #ifdef CONFIG_CMD_PCI -#define CONFIG_PCI_SCAN_SHOW -#define CONFIG_PCI_FIXUP_DEV #define CONFIG_PCIE_IMX #endif
@@ -82,13 +80,6 @@
/* Various command support */
-/* Ethernet support */ -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_FEC_MXC_PHYADDR 0 -#define CONFIG_ARP_TIMEOUT 200UL - /* USB Configs */ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) @@ -129,7 +120,6 @@ #define CONFIG_SERVERIP 192.168.1.146
#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \ - "pcidisable=1\0" \ "splashpos=m,m\0" \ "usb_pgood_delay=2000\0" \ "console=ttymxc1\0" \