ICSSG firmware supports FDB commands. Add support to send FDB commands from driver. Once rx_flow_id is obtained from dma, let firmware know that we are using this rx_flow_id by sending a FDB command.
Signed-off-by: MD Danish Anwar danishanwar@ti.com --- drivers/net/ti/icssg_config.c | 66 +++++++++++++++++++++++++++++++++++ drivers/net/ti/icssg_config.h | 18 ++++++++++ drivers/net/ti/icssg_prueth.c | 6 ++++ drivers/net/ti/icssg_prueth.h | 6 ++++ 4 files changed, 96 insertions(+)
diff --git a/drivers/net/ti/icssg_config.c b/drivers/net/ti/icssg_config.c index 33298c3374..7e11ef128f 100644 --- a/drivers/net/ti/icssg_config.c +++ b/drivers/net/ti/icssg_config.c @@ -9,6 +9,7 @@ #include "icssg_switch_map.h" #include "icss_mii_rt.h" #include <dm/device_compat.h> +#include <linux/iopoll.h>
/* TX IPG Values to be set for 100M and 1G link speeds. These values are * in ocp_clk cycles. So need change if ocp_clk is changed for a specific @@ -401,3 +402,68 @@ int emac_set_port_state(struct prueth *prueth,
return ret; } + +int icssg_send_fdb_msg(struct prueth *prueth, struct mgmt_cmd *cmd, + struct mgmt_cmd_rsp *rsp) +{ + int slice = prueth->slice; + int ret, addr; + + addr = icssg_queue_pop(prueth, slice == 0 ? + ICSSG_CMD_POP_SLICE0 : ICSSG_CMD_POP_SLICE1); + if (addr < 0) + return addr; + + /* First 4 bytes have FW owned buffer linking info which should + * not be touched + */ + memcpy_toio((void __iomem *)prueth->shram.pa + addr + 4, cmd, sizeof(*cmd)); + icssg_queue_push(prueth, slice == 0 ? + ICSSG_CMD_PUSH_SLICE0 : ICSSG_CMD_PUSH_SLICE1, addr); + ret = read_poll_timeout(icssg_queue_pop, addr, addr >= 0, + 2000, 20000000, prueth, slice == 0 ? + ICSSG_RSP_POP_SLICE0 : ICSSG_RSP_POP_SLICE1); + + if (ret) { + dev_err(prueth->dev, "Timedout sending HWQ message\n"); + return ret; + } + + memcpy_fromio(rsp, (void __iomem *)prueth->shram.pa + addr, sizeof(*rsp)); + /* Return buffer back for to pool */ + icssg_queue_push(prueth, slice == 0 ? + ICSSG_RSP_PUSH_SLICE0 : ICSSG_RSP_PUSH_SLICE1, addr); + + return 0; +} + +int emac_fdb_flow_id_updated(struct prueth *prueth) +{ + struct mgmt_cmd_rsp fdb_cmd_rsp = { 0 }; + int slice = prueth->slice; + struct mgmt_cmd fdb_cmd = { 0 }; + int ret = 0; + + fdb_cmd.header = ICSSG_FW_MGMT_CMD_HEADER; + fdb_cmd.type = ICSSG_FW_MGMT_FDB_CMD_TYPE_RX_FLOW; + fdb_cmd.seqnum = ++(prueth->icssg_hwcmdseq); + fdb_cmd.param = 0; + + fdb_cmd.param |= (slice << 4); + fdb_cmd.cmd_args[0] = 0; + + ret = icssg_send_fdb_msg(prueth, &fdb_cmd, &fdb_cmd_rsp); + if (ret) + return ret; + + if (fdb_cmd.seqnum != fdb_cmd_rsp.seqnum) { + dev_err(prueth->dev, "seqnum doesn't match, cmd.seqnum %d != rsp.seqnum %d\n", + fdb_cmd.seqnum, fdb_cmd_rsp.seqnum); + return -EINVAL; + } + + if (fdb_cmd_rsp.status == 1) + return 0; + + return -EINVAL; +} diff --git a/drivers/net/ti/icssg_config.h b/drivers/net/ti/icssg_config.h index fc6eae0426..156127bd3d 100644 --- a/drivers/net/ti/icssg_config.h +++ b/drivers/net/ti/icssg_config.h @@ -80,6 +80,7 @@ struct icssg_rxq_ctx { #define ICSSG_FW_MGMT_FDB_CMD_TYPE 0x03 #define ICSSG_FW_MGMT_CMD_TYPE 0x04 #define ICSSG_FW_MGMT_PKT 0x80000000 +#define ICSSG_FW_MGMT_FDB_CMD_TYPE_RX_FLOW 0x05
struct icssg_r30_cmd { u32 cmd[4]; @@ -156,6 +157,23 @@ struct icssg_setclock_desc { u32 CMP0_new; } __packed;
+struct mgmt_cmd { + u8 param; + u8 seqnum; + u8 type; + u8 header; + u32 cmd_args[3]; +} __packed; + +struct mgmt_cmd_rsp { + u32 reserved; + u8 status; + u8 seqnum; + u8 type; + u8 header; + u32 cmd_args[3]; +} __packed; + #define ICSSG_CMD_POP_SLICE0 56 #define ICSSG_CMD_POP_SLICE1 60
diff --git a/drivers/net/ti/icssg_prueth.c b/drivers/net/ti/icssg_prueth.c index 9cc700eca5..1a7445a015 100644 --- a/drivers/net/ti/icssg_prueth.c +++ b/drivers/net/ti/icssg_prueth.c @@ -225,6 +225,12 @@ static int prueth_start(struct udevice *dev) dev_info(dev, "K3 ICSSG: rflow_id_base: %u, chn_name = %s\n", dma_rx_cfg_data->flow_id_base, chn_name);
+ ret = emac_fdb_flow_id_updated(priv); + if (ret) { + dev_err(dev, "Failed to update Rx Flow ID %d", ret); + goto phy_fail; + } + ret = phy_startup(priv->phydev); if (ret) { dev_err(dev, "phy_startup failed\n"); diff --git a/drivers/net/ti/icssg_prueth.h b/drivers/net/ti/icssg_prueth.h index f34ab5d6d4..e41ed16a05 100644 --- a/drivers/net/ti/icssg_prueth.h +++ b/drivers/net/ti/icssg_prueth.h @@ -68,6 +68,7 @@ struct prueth { bool mdio_manual_mode; int speed; int duplex; + u8 icssg_hwcmdseq; };
/* config helpers */ @@ -80,4 +81,9 @@ int icssg_queue_pop(struct prueth *prueth, u8 queue); void icssg_queue_push(struct prueth *prueth, int queue, u16 addr); u32 icssg_queue_level(struct prueth *prueth, int queue);
+/* FDB helpers */ +int icssg_send_fdb_msg(struct prueth *prueth, struct mgmt_cmd *cmd, + struct mgmt_cmd_rsp *rsp); +int emac_fdb_flow_id_updated(struct prueth *prueth); + #endif /* __NET_TI_ICSSG_PRUETH_H */