This information is already available under vcores->volts.efuse.reg. There is no reason for duplicating the information since AVS Class 0 definitions are common for OMAP5 and DRA7 and defined with STD_FUSE_OPP_* macros. This allows a central location of defining the ABB and voltage definitions especially since they are reused.
This also makes it simpler to prevent mistakes involved when changing the boot OPP for the device.
Signed-off-by: Nishanth Menon nm@ti.com --- arch/arm/cpu/armv7/omap-common/clocks-common.c | 4 ++-- arch/arm/cpu/armv7/omap5/prcm-regs.c | 2 -- arch/arm/include/asm/omap_common.h | 1 - 3 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index cb41055b91e6..27e6871fde86 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -584,7 +584,7 @@ void scale_vcores(struct vcores_data const *vcores) debug("mpu: %d\n", vcores->mpu.value); do_scale_vcore(vcores->mpu.addr, vcores->mpu.value, vcores->mpu.pmic); /* Configure MPU ABB LDO after scale */ - abb_setup((*ctrl)->control_std_fuse_opp_vdd_mpu_2, + abb_setup(vcores->mpu.efuse.reg, (*ctrl)->control_wkup_ldovbb_mpu_voltage_ctrl, (*prcm)->prm_abbldo_mpu_setup, (*prcm)->prm_abbldo_mpu_ctrl, @@ -621,7 +621,7 @@ void scale_vcores(struct vcores_data const *vcores) do_scale_vcore(vcores->mpu.addr, val, vcores->mpu.pmic);
/* Configure MPU ABB LDO after scale */ - abb_setup((*ctrl)->control_std_fuse_opp_vdd_mpu_2, + abb_setup(vcores->mpu.efuse.reg, (*ctrl)->control_wkup_ldovbb_mpu_voltage_ctrl, (*prcm)->prm_abbldo_mpu_setup, (*prcm)->prm_abbldo_mpu_ctrl, diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c index cd289ddd2be3..c55c6af9e566 100644 --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -297,7 +297,6 @@ struct prcm_regs const omap5_es1_prcm = {
struct omap_sys_ctrl_regs const omap5_ctrl = { .control_status = 0x4A002134, - .control_std_fuse_opp_vdd_mpu_2 = 0x4A0021B4, .control_std_fuse_die_id_0 = 0x4A002200, .control_std_fuse_die_id_1 = 0x4A002208, .control_std_fuse_die_id_2 = 0x4A00220C, @@ -440,7 +439,6 @@ struct omap_sys_ctrl_regs const dra7xx_ctrl = { .control_srcomp_code_latch = 0x4A002E84, .control_ddr_control_ext_0 = 0x4A002E88, .control_padconf_core_base = 0x4A003400, - .control_std_fuse_opp_vdd_mpu_2 = 0x4A003B20, .control_port_emif1_sdram_config = 0x4AE0C110, .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114, .control_port_emif2_sdram_config = 0x4AE0C118, diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 8c85f46db6ef..2daa440432c3 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -363,7 +363,6 @@ struct omap_sys_ctrl_regs { u32 control_core_mac_id_0_hi; u32 control_core_mac_id_1_lo; u32 control_core_mac_id_1_hi; - u32 control_std_fuse_opp_vdd_mpu_2; u32 control_phy_power_usb; u32 control_core_mmr_lock1; u32 control_core_mmr_lock2;