Jean-Christophe PLAGNIOL-VILLARD wrote:
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com
doc/README.qemu_mips | 37 ++++++++++++++++++++++++++++++++++++- 1 files changed, 36 insertions(+), 1 deletions(-)
Applied and pushed out, thanks.
One comment bellow.
diff --git a/doc/README.qemu_mips b/doc/README.qemu_mips index 2fdd2b0..8fa4907 100644 --- a/doc/README.qemu_mips +++ b/doc/README.qemu_mips @@ -17,12 +17,47 @@ create image: start it: # qemu-system-mips -M mips -pflash flash -monitor null -nographic
+Ide Disk
+# dd of=ide bs=1k cout=100k if=/dev/zero
+# sfdisk -C 261 -d ide +# partition table of ide +unit: sectors
ide1 : start= 63, size= 32067, Id=83ide2 : start= 32130, size= 32130, Id=83ide3 : start= 64260, size= 4128705, Id=83ide4 : start= 0, size= 0, Id= 0+# Generate uImage +# tools/mkimage -A mips -O linux -T kernel -C gzip -a 0x80010000 -e 0x80245650 -n "Linux 2.6.24.y" -d vmlinux.bin.gz uImage +# Copy to Flash +# dd if=uImage bs=1k conv=notrunc seek=224 of=flash +# Copy to ide +# dd if=uImage bs=512 conv=notrunc seek=63 of=ide
+# Generate ext2 on part 2 +# Attached as loop device ide offset = 32130 * 512 +# losetup -o 16450560 -f ide +# Format as ext2 ( arg2 : nb blocks) +# mke2fs /dev/loop0 16065 +# losetup -d /dev/loop0 +# Mount and copy uImage and initrd.gz to it +# mount -o loop,offset=16450560 -t ext2 ide /mnt +# Umount it +# umount /mnt
Comments are difficult to distinguish from real commands here. It might be readable if we use another comment style, or another command prompt.
And again, thanks for your continued work to improve qemu "getting started" guide.
Shinya