
some boards have common headers for several individual build-targets where CONFIG_SYS_SPI_U_BOOT_OFFS is defined even it is not needed (only needed if CONFIG_SPL_SPI_LOAD is defined also). Take this define here under '#ifdef CONFIG_SPL_SPI_LOAD' for having a clean run of moveconfig.py
Signed-off-by: Hannes Schmelzer hannes.schmelzer@br-automation.com ---
include/configs/at91sam9n12ek.h | 2 +- include/configs/at91sam9x5ek.h | 2 +- include/configs/rk3128_common.h | 2 ++ include/configs/rk3288_common.h | 2 ++ include/configs/rk3328_common.h | 2 ++ include/configs/rk3399_common.h | 2 ++ include/configs/sama5d27_som1_ek.h | 2 +- include/configs/sama5d3xek.h | 2 +- include/configs/socfpga_common.h | 4 ++-- include/configs/sunxi-common.h | 2 +- include/configs/ti814x_evm.h | 2 ++ include/configs/xilinx_zynqmp.h | 3 ++- include/configs/zynq-common.h | 2 ++ 13 files changed, 21 insertions(+), 8 deletions(-)
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index e9b97b6..2abe979 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -153,7 +153,7 @@ #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#elif CONFIG_SYS_USE_NANDFLASH -#elif CONFIG_SPI_BOOT +#elif CONFIG_SPI_BOOT && CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400
#elif CONFIG_NAND_BOOT diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 9353de7..8056822 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -125,7 +125,7 @@ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#elif CONFIG_SPI_BOOT +#elif CONFIG_SPI_BOOT && CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400
#elif CONFIG_NAND_BOOT diff --git a/include/configs/rk3128_common.h b/include/configs/rk3128_common.h index edd5532..e39009a 100644 --- a/include/configs/rk3128_common.h +++ b/include/configs/rk3128_common.h @@ -27,7 +27,9 @@ #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
/* RAW SD card / eMMC locations. */ +#ifdef CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#endif
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_SDRAM_BASE 0x60000000 diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index a647619..f30cc94 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -30,7 +30,9 @@ #define CONFIG_IRAM_BASE 0xff700000
/* RAW SD card / eMMC locations. */ +#ifdef CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#endif
/* FAT sd card locations. */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 diff --git a/include/configs/rk3328_common.h b/include/configs/rk3328_common.h index bd424c0..a68e01e 100644 --- a/include/configs/rk3328_common.h +++ b/include/configs/rk3328_common.h @@ -25,7 +25,9 @@
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
+#ifdef CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#endif
/* FAT sd card locations. */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index fc66797..cda5d03 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -39,7 +39,9 @@ #define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ 200000000
/* RAW SD card / eMMC locations. */ +#ifdef CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#endif
/* FAT sd card locations. */ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 diff --git a/include/configs/sama5d27_som1_ek.h b/include/configs/sama5d27_som1_ek.h index 90846c4..7898f4d 100644 --- a/include/configs/sama5d27_som1_ek.h +++ b/include/configs/sama5d27_som1_ek.h @@ -62,7 +62,7 @@ #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif
-#ifdef CONFIG_QSPI_BOOT +#if defined(CONFIG_QSPI_BOOT) && defined(CONFIG_SPL_SPI_LOAD) #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000 #endif
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index db840e9..c5a2e54 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -84,7 +84,7 @@ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#elif CONFIG_SPI_BOOT +#elif CONFIG_SPI_BOOT && CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
#elif CONFIG_NAND_BOOT diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 36b0ed5..4141c7e 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -214,9 +214,9 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
/* SPL QSPI boot support */ #ifdef CONFIG_SPL_SPI_SUPPORT -#if defined(CONFIG_TARGET_SOCFPGA_GEN5) +#if defined(CONFIG_TARGET_SOCFPGA_GEN5) && defined(CONFIG_SPL_SPI_LOAD) #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 -#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10) +#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10) && defined(CONFIG_SPL_SPI_LOAD) #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x100000 #endif #endif diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index d7133a7..c5dbf6d 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -118,7 +118,7 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 8 #endif
-#ifdef CONFIG_SPL_SPI_SUNXI +#if defined(CONFIG_SPL_SPI_SUNXI) && defined(CONFIG_SPL_SPI_LOAD) #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 #endif
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 90b424f..0c11587 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -130,7 +130,9 @@ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
+#ifdef CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#endif #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
/* diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index bbcb207..56500fe 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -217,9 +217,10 @@ # define CONFIG_SYS_SPI_KERNEL_OFFS 0x80000 # define CONFIG_SYS_SPI_ARGS_OFFS 0xa0000 # define CONFIG_SYS_SPI_ARGS_SIZE 0xa0000 - +#ifdef CONFIG_SPL_SPI_LOAD # define CONFIG_SYS_SPI_U_BOOT_OFFS 0x170000 #endif +#endif
/* u-boot is like dtb */ #define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin" diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index bb6a835..fd761c2 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -293,7 +293,9 @@
/* qspi mode is working fine */ #ifdef CONFIG_ZYNQ_QSPI +#ifdef CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x100000 +#endif #define CONFIG_SYS_SPI_ARGS_OFFS 0x200000 #define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 #define CONFIG_SYS_SPI_KERNEL_OFFS (CONFIG_SYS_SPI_ARGS_OFFS + \