OMAP3 used GPMC_NAND_ECC_LP_x8_LAYOUT and GPMC_NAND_ECC_LP_x16_LAYOUT macros to configure GPMC controller for x7 or x8 bit device connected to its interface. Now this information is encoded in CONFIG_SYS_NAND_DEVICE_WIDTH macro, so above macros can be completely removed.
Signed-off-by: Pekon Gupta pekon@ti.com --- arch/arm/cpu/armv7/omap3/mem.c | 12 ------------ arch/arm/include/asm/arch-omap3/mem.h | 8 -------- board/compulab/cm_t35/cm_t35.c | 12 ++++++------ include/configs/cm_t335.h | 1 - include/configs/pengwyn.h | 1 - include/configs/tao3530.h | 1 - include/configs/tseries.h | 1 - 7 files changed, 6 insertions(+), 30 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap3/mem.c b/arch/arm/cpu/armv7/omap3/mem.c index e649409..1832aff 100644 --- a/arch/arm/cpu/armv7/omap3/mem.c +++ b/arch/arm/cpu/armv7/omap3/mem.c @@ -21,17 +21,6 @@ struct gpmc *gpmc_cfg;
#if defined(CONFIG_CMD_NAND) -#if defined(GPMC_NAND_ECC_SP_x8_LAYOUT) || defined(GPMC_NAND_ECC_LP_x8_LAYOUT) -static const u32 gpmc_m_nand[GPMC_MAX_REG] = { - SMNAND_GPMC_CONFIG1, - SMNAND_GPMC_CONFIG2, - SMNAND_GPMC_CONFIG3, - SMNAND_GPMC_CONFIG4, - SMNAND_GPMC_CONFIG5, - SMNAND_GPMC_CONFIG6, - 0, -}; -#else static const u32 gpmc_m_nand[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG1, M_NAND_GPMC_CONFIG2, @@ -40,7 +29,6 @@ static const u32 gpmc_m_nand[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG5, M_NAND_GPMC_CONFIG6, 0 }; -#endif #endif /* CONFIG_CMD_NAND */
#if defined(CONFIG_CMD_ONENAND) diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h index 1804191..d90fe16 100644 --- a/arch/arm/include/asm/arch-omap3/mem.h +++ b/arch/arm/include/asm/arch-omap3/mem.h @@ -353,14 +353,6 @@ enum {
#define GPMC_CS_ENABLE 0x1
-#define SMNAND_GPMC_CONFIG1 0x00000800 -#define SMNAND_GPMC_CONFIG2 0x00141400 -#define SMNAND_GPMC_CONFIG3 0x00141400 -#define SMNAND_GPMC_CONFIG4 0x0F010F01 -#define SMNAND_GPMC_CONFIG5 0x010C1414 -#define SMNAND_GPMC_CONFIG6 0x1F0F0A80 -#define SMNAND_GPMC_CONFIG7 0x00000C44 - #define M_NAND_GPMC_CONFIG1 0x00001800 #define M_NAND_GPMC_CONFIG2 0x00141400 #define M_NAND_GPMC_CONFIG3 0x00141400 diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c index 00bcf41..0944903 100644 --- a/board/compulab/cm_t35/cm_t35.c +++ b/board/compulab/cm_t35/cm_t35.c @@ -54,12 +54,12 @@ static u32 gpmc_net_config[GPMC_MAX_REG] = { };
static u32 gpmc_nand_config[GPMC_MAX_REG] = { - SMNAND_GPMC_CONFIG1, - SMNAND_GPMC_CONFIG2, - SMNAND_GPMC_CONFIG3, - SMNAND_GPMC_CONFIG4, - SMNAND_GPMC_CONFIG5, - SMNAND_GPMC_CONFIG6, + M_NAND_GPMC_CONFIG1, + M_NAND_GPMC_CONFIG2, + M_NAND_GPMC_CONFIG3, + M_NAND_GPMC_CONFIG4, + M_NAND_GPMC_CONFIG5, + M_NAND_GPMC_CONFIG6, 0, };
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index 158cf8f..850f3b0 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -141,7 +141,6 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
#define CONFIG_CMD_NAND -#define GPMC_NAND_ECC_LP_x8_LAYOUT #define CONFIG_SYS_NAND_DEVICE_WIDTH 8 #define MTDIDS_DEFAULT "nand0=nand" #define MTDPARTS_DEFAULT "mtdparts=nand:2m(spl)," \ diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h index 0a0c77f..289628a 100644 --- a/include/configs/pengwyn.h +++ b/include/configs/pengwyn.h @@ -150,7 +150,6 @@ #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
-#define GPMC_NAND_ECC_LP_x8_LAYOUT 1 #define MTDIDS_DEFAULT "nand0=omap2-nand.0" #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \ "128k(SPL.backup1)," \ diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 7dee34e..689a8a3 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -137,7 +137,6 @@ #define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ /* to access nand at */ /* CS0 */ -#define GPMC_NAND_ECC_LP_x16_LAYOUT
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ diff --git a/include/configs/tseries.h b/include/configs/tseries.h index 4c5f11a..764e3b4 100644 --- a/include/configs/tseries.h +++ b/include/configs/tseries.h @@ -157,7 +157,6 @@ /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */ #define CONFIG_NAND_OMAP_ELM #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_SYS_NAND_DEVICE_WIDTH 8 #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)