On 04/09/2012 05:49 PM, Lei Wen wrote:
Hi Jaehoon,
-----Original Message----- From: Jaehoon Chung [mailto:jh80.chung@samsung.com] Sent: Monday, April 09, 2012 3:58 PM To: u-boot@lists.denx.de; Andy Fleming; mk7.kang@samsung.com; Kyungmin Park; Lei Wen Subject: [PATCH v3 2/3] mmc: use sdhci.c intead of s5p_mmc.c
In driver mmc, generic sdhci code is implemented. s5p_mmc file is dupulicated. we are good that use the generic sdhci. This patch supported the sdhci for Samsung-SoC.
Signed-off-by: Jaehoon Chung jh80.chung@samsung.com Signed-off-by: Kyungmin Park kyungmin.park@samsung.com
arch/arm/include/asm/arch-exynos/mmc.h | 93 +++--- arch/arm/include/asm/arch-s5pc1xx/mmc.h | 93 +++--- drivers/mmc/Makefile | 2 +- drivers/mmc/s5p_mmc.c | 490
drivers/mmc/s5p_sdhci.c | 98 ++++++ drivers/mmc/sdhci.c | 12 + include/sdhci.h | 6 +
I think you'd better to separate the sdhci code change with other codes change. So that others could easily cherry pick your updated sdhci patches.
Ok..i will re-work and resend the patches.
Best Regards, Jaehoon Chung
Thanks, Lei
7 files changed, 211 insertions(+), 583 deletions(-) delete mode 100644 drivers/mmc/s5p_mmc.c create mode 100644 drivers/mmc/s5p_sdhci.c
diff --git a/arch/arm/include/asm/arch-exynos/mmc.h b/arch/arm/include/asm/arch-exynos/mmc.h index 30f82b8..0f701c9 100644 --- a/arch/arm/include/asm/arch-exynos/mmc.h +++ b/arch/arm/include/asm/arch-exynos/mmc.h @@ -21,53 +21,54 @@ #ifndef __ASM_ARCH_MMC_H_ #define __ASM_ARCH_MMC_H_
-#ifndef __ASSEMBLY__ -struct s5p_mmc {
unsigned int sysad;unsigned short blksize;unsigned short blkcnt;unsigned int argument;unsigned short trnmod;unsigned short cmdreg;unsigned int rspreg0;unsigned int rspreg1;unsigned int rspreg2;unsigned int rspreg3;unsigned int bdata;unsigned int prnsts;unsigned char hostctl;unsigned char pwrcon;unsigned char blkgap;unsigned char wakcon;unsigned short clkcon;unsigned char timeoutcon;unsigned char swrst;unsigned int norintsts; /* errintsts */unsigned int norintstsen; /* errintstsen */unsigned int norintsigen; /* errintsigen */unsigned short acmd12errsts;unsigned char res1[2];unsigned int capareg;unsigned char res2[4];unsigned int maxcurr;unsigned char res3[0x34];unsigned int control2;unsigned int control3;unsigned char res4[4];unsigned int control4;unsigned char res5[0x6e];unsigned short hcver;unsigned char res6[0xFF00];-}; +#define SDHCI_CONTROL2 0x80 +#define SDHCI_CONTROL3 0x84 +#define SDHCI_CONTROL4 0x8C
-struct mmc_host {
struct s5p_mmc *reg;unsigned int version; /* SDHCI spec. version */unsigned int clock; /* Current clock (MHz) */int dev_index;-}; +#define SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31) +#define SDHCI_CTRL2_ENCMDCNFMSK (1 << 30) +#define SDHCI_CTRL2_CDINVRXD3 (1 << 29) +#define SDHCI_CTRL2_SLCARDOUT (1 << 28)
-int s5p_mmc_init(int dev_index, int bus_width); +#define SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24) +#define SDHCI_CTRL2_FLTCLKSEL_SHIFT (24) +#define SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24)
-#endif /* __ASSEMBLY__ */ +#define SDHCI_CTRL2_LVLDAT_MASK (0xff << 16) +#define SDHCI_CTRL2_LVLDAT_SHIFT (16) +#define SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16)
+#define SDHCI_CTRL2_ENFBCLKTX (1 << 15) +#define SDHCI_CTRL2_ENFBCLKRX (1 << 14) +#define SDHCI_CTRL2_SDCDSEL (1 << 13) +#define SDHCI_CTRL2_SDSIGPC (1 << 12) +#define SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11)
+#define SDHCI_CTRL2_DFCNT_MASK(_x) ((_x) << 9) +#define SDHCI_CTRL2_DFCNT_SHIFT (9)
+#define SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8) +#define SDHCI_CTRL2_RWAITMODE (1 << 7) +#define SDHCI_CTRL2_DISBUFRD (1 << 6) +#define SDHCI_CTRL2_SELBASECLK_MASK(_x) ((_x) << 4) +#define SDHCI_CTRL2_SELBASECLK_SHIFT (4) +#define SDHCI_CTRL2_PWRSYNC (1 << 3) +#define SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1) +#define SDHCI_CTRL2_HWINITFIN (1 << 0)
+#define SDHCI_CTRL3_FCSEL3 (1 << 31) +#define SDHCI_CTRL3_FCSEL2 (1 << 23) +#define SDHCI_CTRL3_FCSEL1 (1 << 15) +#define SDHCI_CTRL3_FCSEL0 (1 << 7)
+#define SDHCI_CTRL4_DRIVE_MASK(_x) ((_x) << 16) +#define SDHCI_CTRL4_DRIVE_SHIFT (16)
+int s5p_sdhci_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks);
+static inline unsigned int s5p_mmc_init(int index, int bus_width) +{
unsigned int base = samsung_get_base_mmc() + (0x10000 * index);return s5p_sdhci_init(base, 52000000, 400000, index);+} #endif diff --git a/arch/arm/include/asm/arch-s5pc1xx/mmc.h b/arch/arm/include/asm/arch-s5pc1xx/mmc.h index adef4ee..0f701c9 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/mmc.h +++ b/arch/arm/include/asm/arch-s5pc1xx/mmc.h @@ -21,53 +21,54 @@ #ifndef __ASM_ARCH_MMC_H_ #define __ASM_ARCH_MMC_H_
-#ifndef __ASSEMBLY__ -struct s5p_mmc {
unsigned int sysad;unsigned short blksize;unsigned short blkcnt;unsigned int argument;unsigned short trnmod;unsigned short cmdreg;unsigned int rspreg0;unsigned int rspreg1;unsigned int rspreg2;unsigned int rspreg3;unsigned int bdata;unsigned int prnsts;unsigned char hostctl;unsigned char pwrcon;unsigned char blkgap;unsigned char wakcon;unsigned short clkcon;unsigned char timeoutcon;unsigned char swrst;unsigned int norintsts; /* errintsts */unsigned int norintstsen; /* errintstsen */unsigned int norintsigen; /* errintsigen */unsigned short acmd12errsts;unsigned char res1[2];unsigned int capareg;unsigned char res2[4];unsigned int maxcurr;unsigned char res3[0x34];unsigned int control2;unsigned int control3;unsigned char res4[4];unsigned int control4;unsigned char res5[0x6e];unsigned short hcver;unsigned char res6[0xFFF00];-}; +#define SDHCI_CONTROL2 0x80 +#define SDHCI_CONTROL3 0x84 +#define SDHCI_CONTROL4 0x8C
-struct mmc_host {
struct s5p_mmc *reg;unsigned int version; /* SDHCI spec. version */unsigned int clock; /* Current clock (MHz) */int dev_index;-}; +#define SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31) +#define SDHCI_CTRL2_ENCMDCNFMSK (1 << 30) +#define SDHCI_CTRL2_CDINVRXD3 (1 << 29) +#define SDHCI_CTRL2_SLCARDOUT (1 << 28)
-int s5p_mmc_init(int dev_index, int bus_width); +#define SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24) +#define SDHCI_CTRL2_FLTCLKSEL_SHIFT (24) +#define SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24)
-#endif /* __ASSEMBLY__ */ +#define SDHCI_CTRL2_LVLDAT_MASK (0xff << 16) +#define SDHCI_CTRL2_LVLDAT_SHIFT (16) +#define SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16)
+#define SDHCI_CTRL2_ENFBCLKTX (1 << 15) +#define SDHCI_CTRL2_ENFBCLKRX (1 << 14) +#define SDHCI_CTRL2_SDCDSEL (1 << 13) +#define SDHCI_CTRL2_SDSIGPC (1 << 12) +#define SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11)
+#define SDHCI_CTRL2_DFCNT_MASK(_x) ((_x) << 9) +#define SDHCI_CTRL2_DFCNT_SHIFT (9)
+#define SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8) +#define SDHCI_CTRL2_RWAITMODE (1 << 7) +#define SDHCI_CTRL2_DISBUFRD (1 << 6) +#define SDHCI_CTRL2_SELBASECLK_MASK(_x) ((_x) << 4) +#define SDHCI_CTRL2_SELBASECLK_SHIFT (4) +#define SDHCI_CTRL2_PWRSYNC (1 << 3) +#define SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1) +#define SDHCI_CTRL2_HWINITFIN (1 << 0)
+#define SDHCI_CTRL3_FCSEL3 (1 << 31) +#define SDHCI_CTRL3_FCSEL2 (1 << 23) +#define SDHCI_CTRL3_FCSEL1 (1 << 15) +#define SDHCI_CTRL3_FCSEL0 (1 << 7)
+#define SDHCI_CTRL4_DRIVE_MASK(_x) ((_x) << 16) +#define SDHCI_CTRL4_DRIVE_SHIFT (16)
+int s5p_sdhci_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks);
+static inline unsigned int s5p_mmc_init(int index, int bus_width) +{
unsigned int base = samsung_get_base_mmc() + (0x10000 * index);return s5p_sdhci_init(base, 52000000, 400000, index);+} #endif diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index c245352..a8e681c 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -39,8 +39,8 @@ COBJS-$(CONFIG_MXS_MMC) += mxsmmc.o COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o COBJS-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o -COBJS-$(CONFIG_S5P_MMC) += s5p_mmc.o COBJS-$(CONFIG_SDHCI) += sdhci.o +COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o COBJS-$(CONFIG_TEGRA2_MMC) += tegra2_mmc.o
diff --git a/drivers/mmc/s5p_mmc.c b/drivers/mmc/s5p_mmc.c deleted file mode 100644 index 4ae3aaf..0000000 --- a/drivers/mmc/s5p_mmc.c +++ /dev/null @@ -1,490 +0,0 @@ -/*
- (C) Copyright 2009 SAMSUNG Electronics
- Minkyu Kang mk7.kang@samsung.com
- Jaehoon Chung jh80.chung@samsung.com
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <common.h> -#include <mmc.h> -#include <asm/io.h> -#include <asm/arch/mmc.h> -#include <asm/arch/clk.h>
-/* support 4 mmc hosts */ -struct mmc mmc_dev[4]; -struct mmc_host mmc_host[4];
-static inline struct s5p_mmc *s5p_get_base_mmc(int dev_index) -{
unsigned long offset = dev_index * sizeof(struct s5p_mmc);return (struct s5p_mmc *)(samsung_get_base_mmc() + offset);-}
-static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data) -{
unsigned char ctrl;debug("data->dest: %08x\n", (u32)data->dest);writel((u32)data->dest, &host->reg->sysad);/** DMASEL[4:3]* 00 = Selects SDMA* 01 = Reserved* 10 = Selects 32-bit Address ADMA2* 11 = Selects 64-bit Address ADMA2*/ctrl = readb(&host->reg->hostctl);ctrl &= ~(3 << 3);writeb(ctrl, &host->reg->hostctl);/* We do not handle DMA boundaries, so set it to max (512 KiB) */writew((7 << 12) | (data->blocksize & 0xFFF), &host->reg->blksize);writew(data->blocks, &host->reg->blkcnt);-}
-static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data) -{
unsigned short mode;/** TRNMOD* MUL1SIN0[5] : Multi/Single Block Select* RD1WT0[4] : Data Transfer Direction Select* 1 = read* 0 = write* ENACMD12[2] : Auto CMD12 Enable* ENBLKCNT[1] : Block Count Enable* ENDMA[0] : DMA Enable*/mode = (1 << 1) | (1 << 0);if (data->blocks > 1)mode |= (1 << 5);if (data->flags & MMC_DATA_READ)mode |= (1 << 4);writew(mode, &host->reg->trnmod);-}
-static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
struct mmc_data *data)-{
struct mmc_host *host = (struct mmc_host *)mmc->priv;int flags, i;unsigned int timeout;unsigned int mask;unsigned int retry = 0x100000;/* Wait max 10 ms */timeout = 10;/** PRNSTS* CMDINHDAT[1] : Command Inhibit (DAT)* CMDINHCMD[0] : Command Inhibit (CMD)*/mask = (1 << 0);if ((data != NULL) || (cmd->resp_type & MMC_RSP_BUSY))mask |= (1 << 1);/** We shouldn't wait for data inihibit for stop commands, even* though they might use busy signaling*/if (data)mask &= ~(1 << 1);while (readl(&host->reg->prnsts) & mask) {if (timeout == 0) {printf("%s: timeout error\n", __func__);return -1;}timeout--;udelay(1000);}if (data)mmc_prepare_data(host, data);debug("cmd->arg: %08x\n", cmd->cmdarg);writel(cmd->cmdarg, &host->reg->argument);if (data)mmc_set_transfer_mode(host, data);if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))return -1;/** CMDREG* CMDIDX[13:8] : Command index* DATAPRNT[5] : Data Present Select* ENCMDIDX[4] : Command Index Check Enable* ENCMDCRC[3] : Command CRC Check Enable* RSPTYP[1:0]* 00 = No Response* 01 = Length 136* 10 = Length 48* 11 = Length 48 Check busy after response*/if (!(cmd->resp_type & MMC_RSP_PRESENT))flags = 0;else if (cmd->resp_type & MMC_RSP_136)flags = (1 << 0);else if (cmd->resp_type & MMC_RSP_BUSY)flags = (3 << 0);elseflags = (2 << 0);if (cmd->resp_type & MMC_RSP_CRC)flags |= (1 << 3);if (cmd->resp_type & MMC_RSP_OPCODE)flags |= (1 << 4);if (data)flags |= (1 << 5);debug("cmd: %d\n", cmd->cmdidx);writew((cmd->cmdidx << 8) | flags, &host->reg->cmdreg);for (i = 0; i < retry; i++) {mask = readl(&host->reg->norintsts);/* Command Complete */if (mask & (1 << 0)) {if (!data)writel(mask, &host->reg->norintsts);break;}}if (i == retry) {printf("%s: waiting for status update\n", __func__);return TIMEOUT;}if (mask & (1 << 16)) {/* Timeout Error */debug("timeout: %08x cmd %d\n", mask, cmd->cmdidx);return TIMEOUT;} else if (mask & (1 << 15)) {/* Error Interrupt */debug("error: %08x cmd %d\n", mask, cmd->cmdidx);return -1;}if (cmd->resp_type & MMC_RSP_PRESENT) {if (cmd->resp_type & MMC_RSP_136) {/* CRC is stripped so we need to do some shifting. */for (i = 0; i < 4; i++) {unsigned int offset =(unsigned int)(&host->reg->rspreg3 - i);cmd->response[i] = readl(offset) << 8;if (i != 3) {cmd->response[i] |=readb(offset - 1);}debug("cmd->resp[%d]: %08x\n",i, cmd->response[i]);}} else if (cmd->resp_type & MMC_RSP_BUSY) {for (i = 0; i < retry; i++) {/* PRNTDATA[23:20] : DAT[3:0] Line Signal */if (readl(&host->reg->prnsts)& (1 << 20)) /* DAT[0] */break;}if (i == retry) {printf("%s: card is still busy\n", __func__);return TIMEOUT;}cmd->response[0] = readl(&host->reg->rspreg0);debug("cmd->resp[0]: %08x\n", cmd->response[0]);} else {cmd->response[0] = readl(&host->reg->rspreg0);debug("cmd->resp[0]: %08x\n", cmd->response[0]);}}if (data) {while (1) {mask = readl(&host->reg->norintsts);if (mask & (1 << 15)) {/* Error Interrupt */writel(mask, &host->reg->norintsts);printf("%s: error during transfer: 0x%08x\n",__func__, mask);return -1;} else if (mask & (1 << 3)) {/** DMA Interrupt, restart the transfer where* it was interrupted.*/unsigned int address = readl(&host->reg->sysad);debug("DMA end\n");writel((1 << 3), &host->reg->norintsts);writel(address, &host->reg->sysad);} else if (mask & (1 << 1)) {/* Transfer Complete */debug("r/w is done\n");break;}}writel(mask, &host->reg->norintsts);}udelay(1000);return 0;-}
-static void mmc_change_clock(struct mmc_host *host, uint clock) -{
int div;unsigned short clk;unsigned long timeout;unsigned long ctrl2;/** SELBASECLK[5:4]* 00/01 = HCLK* 10 = EPLL* 11 = XTI or XEXTCLK*/ctrl2 = readl(&host->reg->control2);ctrl2 &= ~(3 << 4);ctrl2 |= (2 << 4);writel(ctrl2, &host->reg->control2);writew(0, &host->reg->clkcon);/* XXX: we assume that clock is between 40MHz and 50MHz */if (clock == 0)goto out;else if (clock <= 400000)div = 0x100;else if (clock <= 20000000)div = 4;else if (clock <= 26000000)div = 2;elsediv = 1;debug("div: %d\n", div);div >>= 1;/** CLKCON* SELFREQ[15:8] : base clock divied by value* ENSDCLK[2] : SD Clock Enable* STBLINTCLK[1] : Internal Clock Stable* ENINTCLK[0] : Internal Clock Enable*/clk = (div << 8) | (1 << 0);writew(clk, &host->reg->clkcon);set_mmc_clk(host->dev_index, div);/* Wait max 10 ms */timeout = 10;while (!(readw(&host->reg->clkcon) & (1 << 1))) {if (timeout == 0) {printf("%s: timeout error\n", __func__);return;}timeout--;udelay(1000);}clk |= (1 << 2);writew(clk, &host->reg->clkcon);-out:
host->clock = clock;-}
-static void mmc_set_ios(struct mmc *mmc) -{
struct mmc_host *host = mmc->priv;unsigned char ctrl;unsigned long val;debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock);/** SELCLKPADDS[17:16]* 00 = 2mA* 01 = 4mA* 10 = 7mA* 11 = 9mA*/writel(0x3 << 16, &host->reg->control4);val = readl(&host->reg->control2);val &= (0x3 << 4);val |= (1 << 31) | /* write status clear async mode enable */(1 << 30) | /* command conflict mask enable */(1 << 14) | /* Feedback Clock Enable for Rx Clock */(1 << 8); /* SDCLK hold enable */writel(val, &host->reg->control2);/** FCSEL1[15] FCSEL0[7]* FCSel[1:0] : Rx Feedback Clock Delay Control* Inverter delay means10ns delay if SDCLK 50MHz setting* 01 = Delay1 (basic delay)* 11 = Delay2 (basic delay + 2ns)* 00 = Delay3 (inverter delay)* 10 = Delay4 (inverter delay + 2ns)*/writel(0x8080, &host->reg->control3);mmc_change_clock(host, mmc->clock);ctrl = readb(&host->reg->hostctl);/** WIDE8[5]* 0 = Depend on WIDE4* 1 = 8-bit mode* WIDE4[1]* 1 = 4-bit mode* 0 = 1-bit mode*/if (mmc->bus_width == 8)ctrl |= (1 << 5);else if (mmc->bus_width == 4)ctrl |= (1 << 1);elsectrl &= ~(1 << 1);/** OUTEDGEINV[2]* 1 = Riging edge output* 0 = Falling edge output*/ctrl &= ~(1 << 2);writeb(ctrl, &host->reg->hostctl);-}
-static void mmc_reset(struct mmc_host *host) -{
unsigned int timeout;/** RSTALL[0] : Software reset for all* 1 = reset* 0 = work*/writeb((1 << 0), &host->reg->swrst);host->clock = 0;/* Wait max 100 ms */timeout = 100;/* hw clears the bit when it's done */while (readb(&host->reg->swrst) & (1 << 0)) {if (timeout == 0) {printf("%s: timeout error\n", __func__);return;}timeout--;udelay(1000);}-}
-static int mmc_core_init(struct mmc *mmc) -{
struct mmc_host *host = (struct mmc_host *)mmc->priv;unsigned int mask;mmc_reset(host);host->version = readw(&host->reg->hcver);/* mask all */writel(0xffffffff, &host->reg->norintstsen);writel(0xffffffff, &host->reg->norintsigen);writeb(0xe, &host->reg->timeoutcon); /* TMCLK * 2^27 *//** NORMAL Interrupt Status Enable Register init* [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable* [4] ENSTABUFWTRDY : Buffer write Ready Status Enable* [3] ENSTADMAINT : DMA Interrupt Status Enable* [1] ENSTASTANSCMPLT : Transfre Complete Status Enable* [0] ENSTACMDCMPLT : Command Complete Status Enable*/mask = readl(&host->reg->norintstsen);mask &= ~(0xffff);mask |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 1) | (1 << 0);writel(mask, &host->reg->norintstsen);/** NORMAL Interrupt Signal Enable Register init* [1] ENSTACMDCMPLT : Transfer Complete Signal Enable*/mask = readl(&host->reg->norintsigen);mask &= ~(0xffff);mask |= (1 << 1);writel(mask, &host->reg->norintsigen);return 0;-}
-static int s5p_mmc_initialize(int dev_index, int bus_width) -{
struct mmc *mmc;mmc = &mmc_dev[dev_index];sprintf(mmc->name, "SAMSUNG SD/MMC");mmc->priv = &mmc_host[dev_index];mmc->send_cmd = mmc_send_cmd;mmc->set_ios = mmc_set_ios;mmc->init = mmc_core_init;mmc->getcd = NULL;mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;if (bus_width == 8)mmc->host_caps = MMC_MODE_8BIT;elsemmc->host_caps = MMC_MODE_4BIT;mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC;mmc->f_min = 400000;mmc->f_max = 52000000;mmc_host[dev_index].dev_index = dev_index;mmc_host[dev_index].clock = 0;mmc_host[dev_index].reg = s5p_get_base_mmc(dev_index);mmc->b_max = 0;mmc_register(mmc);return 0;-}
-int s5p_mmc_init(int dev_index, int bus_width) -{
return s5p_mmc_initialize(dev_index, bus_width);-} diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c new file mode 100644 index 0000000..1d4481b --- /dev/null +++ b/drivers/mmc/s5p_sdhci.c @@ -0,0 +1,98 @@ +/*
- (C) Copyright 2012 SAMSUNG Electronics
- Jaehoon Chung jh80.chung@samsung.com
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
+#include <common.h> +#include <malloc.h> +#include <sdhci.h> +#include <asm/arch/mmc.h>
+static char *S5P_NAME = "SAMSUNG SDHCI"; +static void s5p_sdhci_set_control_reg(struct sdhci_host *host) +{
unsigned long val, ctrl;/** SELCLKPADDS[17:16]* 00 = 2mA* 01 = 4mA* 10 = 7mA* 11 = 9mA*/sdhci_writel(host, SDHCI_CTRL4_DRIVE_MASK(0x3), SDHCI_CONTROL4);val = sdhci_readl(host, SDHCI_CONTROL2);val &= SDHCI_CTRL2_SELBASECLK_SHIFT;val |= SDHCI_CTRL2_ENSTAASYNCCLR |SDHCI_CTRL2_ENCMDCNFMSK |SDHCI_CTRL2_ENFBCLKRX |SDHCI_CTRL2_ENCLKOUTHOLD;sdhci_writel(host, val, SDHCI_CONTROL2);/** FCSEL3[31] FCSEL2[23] FCSEL1[15] FCSEL0[7]* FCSel[1:0] : Rx Feedback Clock Delay Control* Inverter delay means10ns delay if SDCLK 50MHz setting* 01 = Delay1 (basic delay)* 11 = Delay2 (basic delay + 2ns)* 00 = Delay3 (inverter delay)* 10 = Delay4 (inverter delay + 2ns)*/val = SDHCI_CTRL3_FCSEL3 | SDHCI_CTRL3_FCSEL1;sdhci_writel(host, val, SDHCI_CONTROL3);/** SELBASECLK[5:4]* 00/01 = HCLK* 10 = EPLL* 11 = XTI or XEXTCLK*/ctrl = sdhci_readl(host, SDHCI_CONTROL2);ctrl &= ~SDHCI_CTRL2_SELBASECLK_MASK(0x3);ctrl |= SDHCI_CTRL2_SELBASECLK_MASK(0x2);sdhci_writel(host, ctrl, SDHCI_CONTROL2);+}
+int s5p_sdhci_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks) +{
struct sdhci_host *host = NULL;host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));if (!host) {printf("sdhci__host malloc fail!\n");return 1;}host->name = S5P_NAME;host->ioaddr = (void *)regbase;host->quirks = quirks;host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE;host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;if (quirks & SDHCI_QUIRK_REG32_RW)host->version = sdhci_readl(host, SDHCI_HOST_VERSION - 2) >> 16;elsehost->version = sdhci_readw(host, SDHCI_HOST_VERSION);host->set_control_reg = &s5p_sdhci_set_control_reg;host->host_caps = MMC_MODE_HC;add_sdhci(host, max_clk, min_clk);return 0;+} diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 4de19e8..a5d89c1 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -337,6 +337,9 @@ void sdhci_set_ios(struct mmc *mmc) u32 ctrl; struct sdhci_host *host = (struct sdhci_host *)mmc->priv;
if (host->set_control_reg)host->set_control_reg(host);if (mmc->clock != host->clock) sdhci_set_clock(mmc, mmc->clock);@@ -360,6 +363,9 @@ void sdhci_set_ios(struct mmc *mmc) else ctrl &= ~SDHCI_CTRL_HISPD;
if (host->quirks & SDHCI_QUIRK_NO_HISPD_BIT)ctrl &= ~SDHCI_CTRL_HISPD;sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);}
@@ -443,9 +449,15 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk) mmc->voltages |= MMC_VDD_29_30 | MMC_VDD_30_31; if (caps & SDHCI_CAN_VDD_180) mmc->voltages |= MMC_VDD_165_195;
if (host->quirks & SDHCI_QUIRK_BROKEN_VOLTAGE)mmc->voltages |= host->voltages;mmc->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT; if (caps & SDHCI_CAN_DO_8BIT) mmc->host_caps |= MMC_MODE_8BIT;if (host->host_caps)mmc->host_caps |= host->host_caps; sdhci_reset(host, SDHCI_RESET_ALL); mmc_register(mmc);diff --git a/include/sdhci.h b/include/sdhci.h index a2415ba..9d37183 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -217,6 +217,8 @@ #define SDHCI_QUIRK_32BIT_DMA_ADDR (1 << 0) #define SDHCI_QUIRK_REG32_RW (1 << 1) #define SDHCI_QUIRK_BROKEN_R1B (1 << 2) +#define SDHCI_QUIRK_NO_HISPD_BIT (1 << 3) +#define SDHCI_QUIRK_BROKEN_VOLTAGE (1 << 4)
/* to make gcc happy */ struct sdhci_host; @@ -241,10 +243,14 @@ struct sdhci_host { char *name; void *ioaddr; unsigned int quirks;
unsigned int host_caps; unsigned int version; unsigned int clock; struct mmc *mmc; const struct sdhci_ops *ops;void (*set_control_reg)(struct sdhci_host *host);uint voltages;};
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS