Add platform glue logic for the SATA controller.
Signed-off-by: Roger Quadros rogerq@ti.com --- arch/arm/cpu/armv7/omap-common/Makefile | 3 ++ arch/arm/cpu/armv7/omap-common/sata.c | 78 +++++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-omap5/sata.h | 48 ++++++++++++++++++++ 3 files changed, 129 insertions(+) create mode 100644 arch/arm/cpu/armv7/omap-common/sata.c create mode 100644 arch/arm/include/asm/arch-omap5/sata.h
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index 6e4a0f0..0535b62 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -23,6 +23,9 @@ endif
ifneq ($(CONFIG_OMAP54XX),) COBJS += pipe3-phy.o +ifdef CONFIG_SCSI_AHCI_PLAT +COBJS += sata.o +endif endif
ifeq ($(CONFIG_OMAP34XX),) diff --git a/arch/arm/cpu/armv7/omap-common/sata.c b/arch/arm/cpu/armv7/omap-common/sata.c new file mode 100644 index 0000000..eb079c3 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/sata.c @@ -0,0 +1,78 @@ +/* + * TI SATA platform driver + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <ahci.h> +#include <scsi.h> +#include <asm/arch/clock.h> +#include <asm/arch/sata.h> +#include <asm/io.h> +#include "pipe3-phy.h" + +#if defined(CONFIG_SCSI_AHCI_PLAT) + +static struct pipe3_dpll_map dpll_map_sata[] = { + {12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */ + {16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */ + {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */ + {20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */ + {26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */ + {38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */ + { }, /* Terminator */ +}; + +struct omap_pipe3 sata_phy = { + .pll_ctrl_base = (void __iomem *)TI_SATA_PLLCTRL_BASE, + /* .power_reg is updated at runtime */ + .dpll_map = dpll_map_sata, +}; + +int omap_sata_init(void) +{ + int ret; + u32 val; + + u32 const clk_domains_sata[] = { + 0 + }; + + u32 const clk_modules_hw_auto_sata[] = { + (*prcm)->cm_l3init_ocp2scp3_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_sata[] = { + (*prcm)->cm_l3init_sata_clkctrl, + 0 + }; + + do_enable_clocks(clk_domains_sata, + clk_modules_hw_auto_sata, + clk_modules_explicit_en_sata, + 0); + + /* Enable optional functional clock for SATA */ + setbits_le32((*prcm)->cm_l3init_sata_clkctrl, + SATA_CLKCTRL_OPTFCLKEN_MASK); + + sata_phy.power_reg = (void __iomem *)(*ctrl)->control_phy_power_sata; + + /* Power up the PHY */ + phy_pipe3_power_on(&sata_phy); + + /* Enable SATA module, No Idle, No Standby */ + val = TI_SATA_IDLE_NO | TI_SATA_STANDBY_NO; + writel(val, TI_SATA_WRAPPER_BASE + TI_SATA_SYSCONFIG); + + ret = ahci_init(DWC_AHSATA_BASE); + scsi_scan(1); + + return ret; +} +#endif diff --git a/arch/arm/include/asm/arch-omap5/sata.h b/arch/arm/include/asm/arch-omap5/sata.h new file mode 100644 index 0000000..2ca8947 --- /dev/null +++ b/arch/arm/include/asm/arch-omap5/sata.h @@ -0,0 +1,48 @@ +/* + * SATA Wrapper Register map + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TI_SATA_H +#define _TI_SATA_H + +/* SATA Wrapper module */ +#define TI_SATA_WRAPPER_BASE (OMAP54XX_L4_CORE_BASE + 0x141100) +/* SATA PHY Module */ +#define TI_SATA_PLLCTRL_BASE (OMAP54XX_L4_CORE_BASE + 0x96800) + +/* SATA Wrapper register offsets */ +#define TI_SATA_SYSCONFIG 0x00 +#define TI_SATA_CDRLOCK 0x04 + +/* Register Set */ +#define TI_SATA_SYSCONFIG_OVERRIDE0 (1 << 16) +#define TI_SATA_SYSCONFIG_STANDBY_MASK (0x3 << 4) +#define TI_SATA_SYSCONFIG_IDLE_MASK (0x3 << 2) + +/* Standby modes */ +#define TI_SATA_STANDBY_FORCE 0x0 +#define TI_SATA_STANDBY_NO (0x1 << 4) +#define TI_SATA_STANDBY_SMART_WAKE (0x3 << 4) +#define TI_SATA_STANDBY_SMART (0x2 << 4) + +/* Idle modes */ +#define TI_SATA_IDLE_FORCE 0x0 +#define TI_SATA_IDLE_NO (0x1 << 2) +#define TI_SATA_IDLE_SMART_WAKE (0x3 << 2) +#define TI_SATA_IDLE_SMART (0x2 << 2) + +#ifdef CONFIG_SCSI_AHCI_PLAT +int omap_sata_init(void); +#else +static inline int omap_sata_init(void) +{ + return 0; +} +#endif /* CONFIG_SCSI_AHCI_PLAT */ + +#endif /* _TI_SATA_H */