Re: [PATCH 7/8] clk/qcom: add mnd_width to clk_rcg_set_rate_mnd()

On Wed, 25 Oct 2023 at 01:55, Caleb Connolly caleb.connolly@linaro.org wrote:

This property is needed on some platforms to ensure that only the relevant bits are set in the M/N/D registers.

Signed-off-by: Caleb Connolly caleb.connolly@linaro.org

drivers/clk/qcom/clock-apq8016.c | 4 ++-- drivers/clk/qcom/clock-apq8096.c | 4 ++-- drivers/clk/qcom/clock-qcom.c | 11 +++++++---- drivers/clk/qcom/clock-qcom.h | 2 +- drivers/clk/qcom/clock-qcs404.c | 20 ++++++++++---------- drivers/clk/qcom/clock-sdm845.c | 3 +-- 6 files changed, 23 insertions(+), 21 deletions(-)

Reviewed-by: Sumit Garg sumit.garg@linaro.org

-Sumit

diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c index f74f7a0f5ad9..5eba18739cfb 100644 --- a/drivers/clk/qcom/clock-apq8016.c +++ b/drivers/clk/qcom/clock-apq8016.c @@ -61,7 +61,7 @@ static int clk_init_sdc(struct qcom_cc_priv *priv, int slot, uint rate) clk_enable_cbc(priv->base + SDCC_AHB_CBCR(slot)); /* 800Mhz/div, gpll0 */ clk_rcg_set_rate_mnd(priv->base, &sdc_regs[slot], div, 0, 0,

•                        CFG_CLK_SRC_GPLL0);
  

•                        CFG_CLK_SRC_GPLL0, 8);
    clk_enable_gpll0(priv->base, &gpll0_vote_clk);
    clk_enable_cbc(priv->base + SDCC_APPS_CBCR(slot));
  
  

@@ -84,7 +84,7 @@ static int clk_init_uart(struct qcom_cc_priv *priv)

    /* 7372800 uart block clock @ GPLL0 */
    clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 144, 15625,

•                        CFG_CLK_SRC_GPLL0);
  

•                        CFG_CLK_SRC_GPLL0, 8);
  
    /* Vote for gpll0 clock */
    clk_enable_gpll0(priv->base, &gpll0_vote_clk);
  

diff --git a/drivers/clk/qcom/clock-apq8096.c b/drivers/clk/qcom/clock-apq8096.c index 1efb6e2313a5..48cac08eed67 100644 --- a/drivers/clk/qcom/clock-apq8096.c +++ b/drivers/clk/qcom/clock-apq8096.c @@ -48,7 +48,7 @@ static int clk_init_sdc(struct qcom_cc_priv *priv, uint rate)

    clk_enable_cbc(priv->base + SDCC2_AHB_CBCR);
    clk_rcg_set_rate_mnd(priv->base, &sdc_regs, div, 0, 0,

•                        CFG_CLK_SRC_GPLL0);
  

•                        CFG_CLK_SRC_GPLL0, 8);
    clk_enable_gpll0(priv->base, &gpll0_vote_clk);
    clk_enable_cbc(priv->base + SDCC2_APPS_CBCR);
  
  

@@ -70,7 +70,7 @@ static int clk_init_uart(struct qcom_cc_priv *priv)

    /* 7372800 uart block clock @ GPLL0 */
    clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 192, 15625,

•                        CFG_CLK_SRC_GPLL0);
  

•                        CFG_CLK_SRC_GPLL0, 8);
  
    /* Vote for gpll0 clock */
    clk_enable_gpll0(priv->base, &gpll0_vote_clk);
  

diff --git a/drivers/clk/qcom/clock-qcom.c b/drivers/clk/qcom/clock-qcom.c index a9602d0c9ca6..7a6157bf123f 100644 --- a/drivers/clk/qcom/clock-qcom.c +++ b/drivers/clk/qcom/clock-qcom.c @@ -83,7 +83,7 @@ void clk_bcr_update(phys_addr_t apps_cmd_rcgr)

/* root set rate for clocks with half integer and MND divider */ void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,

•                     int div, int m, int n, int source)
  

•                     int div, int m, int n, int source, u8 mnd_width)
  

{ u32 cfg; /* M value for MND divider. */ @@ -92,11 +92,14 @@ void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, u32 n_val = ~((n) - (m)) * !!(n); /* NOT 2D value for MND divider. */ u32 d_val = ~(n);

•   u32 mask = BIT(mnd_width) - 1;
  

•   debug("m %#x n %#x d %#x div %#x mask %#x\n", m_val, n_val, d_val, div, mask);
  
    /* Program MND values */
  

•   writel(m_val, base + regs->M);
  

•   writel(n_val, base + regs->N);
  

•   writel(d_val, base + regs->D);
  

•   setbits_le32(base + regs->M, m_val & mask);
  

•   setbits_le32(base + regs->N, n_val & mask);
  

•   setbits_le32(base + regs->D, d_val & mask);
  
    /* setup src select and divider */
    cfg  = readl(base + regs->cfg_rcgr);
  

diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h index 4c5959b60038..6fa88fb40af8 100644 --- a/drivers/clk/qcom/clock-qcom.h +++ b/drivers/clk/qcom/clock-qcom.h @@ -70,7 +70,7 @@ void clk_bcr_update(phys_addr_t apps_cmd_rgcr); void clk_enable_cbc(phys_addr_t cbcr); void clk_enable_vote_clk(phys_addr_t base, const struct vote_clk *vclk); void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,

•                     int div, int m, int n, int source);
  

•                     int div, int m, int n, int source, u8 mnd_width);
  

void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div, int source);

diff --git a/drivers/clk/qcom/clock-qcs404.c b/drivers/clk/qcom/clock-qcs404.c index ce83ec741278..d10992ee58bf 100644 --- a/drivers/clk/qcom/clock-qcs404.c +++ b/drivers/clk/qcom/clock-qcs404.c @@ -113,7 +113,7 @@ static const struct bcr_regs blsp1_qup4_i2c_apps_regs = { /* mnd_width = 0 */ };

-ulong msm_set_rate(struct clk *clk, ulong rate) +static ulong qcs404_set_rate(struct clk *clk, ulong rate) { struct qcom_cc_priv *priv = dev_get_priv(clk->dev);

@@ -121,7 +121,7 @@ ulong msm_set_rate(struct clk *clk, ulong rate) case GCC_BLSP1_UART2_APPS_CLK: /* UART: 115200 */ clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 0, 12, 125,

•                                CFG_CLK_SRC_CXO);
  

•                                CFG_CLK_SRC_CXO, 8);
            clk_enable_cbc(priv->base + BLSP1_UART2_APPS_CBCR);
            break;
    case GCC_BLSP1_AHB_CLK:
  

@@ -130,7 +130,7 @@ ulong msm_set_rate(struct clk *clk, ulong rate) case GCC_SDCC1_APPS_CLK: /* SDCC1: 200MHz */ clk_rcg_set_rate_mnd(priv->base, &sdc_regs, 4, 0, 0,

•                                CFG_CLK_SRC_GPLL0);
  

•                                CFG_CLK_SRC_GPLL0, 8);
            clk_enable_gpll0(priv->base, &gpll0_vote_clk);
            clk_enable_cbc(priv->base + SDCC_APPS_CBCR(1));
            break;
  

@@ -140,16 +140,16 @@ ulong msm_set_rate(struct clk *clk, ulong rate) case GCC_ETH_RGMII_CLK: if (rate == 250000000) clk_rcg_set_rate_mnd(priv->base, &emac_regs, 2, 0, 0,

•                                        CFG_CLK_SRC_GPLL1);
  

•                                        CFG_CLK_SRC_GPLL1, 8);
            else if (rate == 125000000)
                    clk_rcg_set_rate_mnd(priv->base, &emac_regs, 4, 0, 0,
  

•                                        CFG_CLK_SRC_GPLL1);
  

•                                        CFG_CLK_SRC_GPLL1, 8);
            else if (rate == 50000000)
                    clk_rcg_set_rate_mnd(priv->base, &emac_regs, 10, 0, 0,
  

•                                        CFG_CLK_SRC_GPLL1);
  

•                                        CFG_CLK_SRC_GPLL1, 8);
            else if (rate == 5000000)
                    clk_rcg_set_rate_mnd(priv->base, &emac_regs, 2, 1, 50,
  

•                                        CFG_CLK_SRC_GPLL1);
  

•                                        CFG_CLK_SRC_GPLL1, 8);
            break;
    default:
            return 0;
  

@@ -166,7 +166,7 @@ static int qcs404_enable(struct clk *clk) case GCC_USB30_MASTER_CLK: clk_enable_cbc(priv->base + USB30_MASTER_CBCR); clk_rcg_set_rate_mnd(priv->base, &usb30_master_regs, 4, 0, 0,

•                                CFG_CLK_SRC_GPLL0);
  

•                                CFG_CLK_SRC_GPLL0, 8);
            break;
    case GCC_SYS_NOC_USB3_CLK:
            clk_enable_cbc(priv->base + SYS_NOC_USB3_CBCR);
  

@@ -188,14 +188,14 @@ static int qcs404_enable(struct clk *clk) clk_enable_cbc(priv->base + ETH_PTP_CBCR); clk_enable_gpll0(priv->base, &gpll1_vote_clk); clk_rcg_set_rate_mnd(priv->base, &emac_ptp_regs, 2, 0, 0,

•                                CFG_CLK_SRC_GPLL1);
  

•                                CFG_CLK_SRC_GPLL1, 8);
            break;
    case GCC_ETH_RGMII_CLK:
            /* SPEED_1000: freq -> 250MHz */
            clk_enable_cbc(priv->base + ETH_RGMII_CBCR);
            clk_enable_gpll0(priv->base, &gpll1_vote_clk);
            clk_rcg_set_rate_mnd(priv->base, &emac_regs, 2, 0, 0,
  

•                                CFG_CLK_SRC_GPLL1);
  

•                                CFG_CLK_SRC_GPLL1, 8);
            break;
    case GCC_ETH_SLAVE_AHB_CLK:
            clk_enable_cbc(priv->base + ETH_SLAVE_AHB_CBCR);
  

diff --git a/drivers/clk/qcom/clock-sdm845.c b/drivers/clk/qcom/clock-sdm845.c index 7b614f9661f0..9345d5293f1e 100644 --- a/drivers/clk/qcom/clock-sdm845.c +++ b/drivers/clk/qcom/clock-sdm845.c @@ -82,8 +82,7 @@ static ulong sdm845_set_rate(struct clk *clk, ulong rate) case GCC_QUPV3_WRAP1_S1_CLK: /* UART9 */ freq = qcom_find_freq(ftbl_gcc_qupv3_wrap0_s0_clk_src, rate); clk_rcg_set_rate_mnd(priv->base, &uart2_regs,

•                                freq->pre_div, freq->m, freq->n, freq->src);
  

•                                freq->pre_div, freq->m, freq->n, freq->src, 16);
            return freq->freq;
    default:
            return 0;
  
  

-- 2.42.0