This patch adds a SPI driver for the Marvell Kirkwood SoC's.
Signed-off-by: Prafulla Wadaskar prafulla@marvell.com --- drivers/spi/Makefile | 1 + drivers/spi/kirkwood_spi.c | 185 +++++++++++++++++++++++++++++++++++ include/asm-arm/arch-kirkwood/spi.h | 56 +++++++++++ 3 files changed, 242 insertions(+), 0 deletions(-) create mode 100644 drivers/spi/kirkwood_spi.c create mode 100644 include/asm-arm/arch-kirkwood/spi.h
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 1350f3e..7ffa47d 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -28,6 +28,7 @@ LIB := $(obj)libspi.a COBJS-$(CONFIG_ATMEL_DATAFLASH_SPI) += atmel_dataflash_spi.o COBJS-$(CONFIG_ATMEL_SPI) += atmel_spi.o COBJS-$(CONFIG_BFIN_SPI) += bfin_spi.o +COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c new file mode 100644 index 0000000..9d16e9b --- /dev/null +++ b/drivers/spi/kirkwood_spi.c @@ -0,0 +1,185 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar prafulla@marvell.com + * + * Derived from drivers/spi/mpc8xxx_spi.c + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <common.h> +#include <malloc.h> +#include <spi.h> +#include <asm/arch/kirkwood.h> +#include <asm/arch/spi.h> +#include <asm/arch/mpp.h> + +static struct kwspi_registers *spireg = (struct kwspi_registers *)KW_SPI_BASE; + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct spi_slave *slave; + u32 data; + u32 kwspi_mpp_config[] = { + MPP0_GPIO, + MPP7_SPI_SCn, + 0 + }; + + if (!spi_cs_is_valid(bus, cs)) + return NULL; + + slave = malloc(sizeof(struct spi_slave)); + if (!slave) + return NULL; + + slave->bus = bus; + slave->cs = cs; + + writel(~KWSPI_CSN_ACT | KWSPI_SMEMRDY, &spireg->ctrl); + + /* calculate spi clock prescaller using max_hz */ + data = ((CONFIG_SYS_TCLK / 2) / max_hz) & KWSPI_CLKPRESCL_MASK; + data |= 0x10; + + /* program spi clock prescaller using max_hz */ + writel(KWSPI_ADRLEN_3BYTE | data, &spireg->cfg); + debug("data = 0x%08x \n", data); + + writel(KWSPI_SMEMRDIRQ, &spireg->irq_cause); + writel(KWSPI_IRQMASK, spireg->irq_mask); + + /* program mpp registers to select SPI_CSn */ + if (cs) { + kwspi_mpp_config[0] = MPP0_GPIO; + kwspi_mpp_config[1] = MPP7_SPI_SCn; + } else { + kwspi_mpp_config[0] = MPP0_SPI_SCn; + kwspi_mpp_config[1] = MPP7_GPO; + } + kirkwood_mpp_conf(kwspi_mpp_config); + + return slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + free(slave); +} + +int spi_claim_bus(struct spi_slave *slave) +{ + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ +} + +#ifndef CONFIG_SPI_CS_IS_VALID +/* + * you can define this function board specific + * define above CONFIG in board specific config file and + * provide the function in board specific src file + */ +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return (bus == 0 && (cs == 0 || cs == 1)); +} +#endif + +void spi_cs_activate(struct spi_slave *slave) +{ + writel(readl(&spireg->ctrl) | KWSPI_IRQUNMASK, &spireg->ctrl); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + writel(readl(&spireg->ctrl) & KWSPI_IRQMASK, &spireg->ctrl); +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags) +{ + unsigned int tmpdout, tmpdin; + int tm, isread = 0; + + debug("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n", + slave->bus, slave->cs, dout, din, bitlen); + + if (flags & SPI_XFER_BEGIN) + spi_cs_activate(slave); + + /* + * handle data in 8-bit chunks + * TBD: 2byte xfer mode to be enabled + */ + writel(((readl(&spireg->cfg) & ~KWSPI_XFERLEN_MASK) | + KWSPI_XFERLEN_1BYTE), &spireg->cfg); + + while (bitlen > 4) { + debug("loopstart bitlen %d\n", bitlen); + tmpdout = 0; + + /* Shift data so it's msb-justified */ + if (dout) + tmpdout = *(u32 *) dout & 0x0ff; + + writel(~KWSPI_SMEMRDIRQ, &spireg->irq_cause); + writel(tmpdout, &spireg->dout); /* Write the data out */ + debug("*** spi_xfer: ... %08x written, bitlen %d\n", + tmpdout, bitlen); + + /* + * Wait for SPI transmit to get out + * or time out (1 second = 1000 ms) + * The NE event must be read and cleared first + */ + for (tm = 0, isread = 0; tm < KWSPI_TIMEOUT; ++tm) { + if (readl(&spireg->irq_cause) & KWSPI_SMEMRDIRQ) { + isread = 1; + tmpdin = readl(&spireg->din); + debug + ("spi_xfer: din %08x..%08x read\n", + din, tmpdin); + + if (din) { + *((u8 *) din) = (u8) tmpdin; + din += 1; + } + if (dout) + dout += 1; + bitlen -= 8; + } + if (isread) + break; + } + if (tm >= KWSPI_TIMEOUT) + printf("*** spi_xfer: Time out during SPI transfer\n"); + + debug("loopend bitlen %d\n", bitlen); + } + + if (flags & SPI_XFER_END) + spi_cs_deactivate(slave); + + return 0; +} diff --git a/include/asm-arm/arch-kirkwood/spi.h b/include/asm-arm/arch-kirkwood/spi.h new file mode 100644 index 0000000..8719279 --- /dev/null +++ b/include/asm-arm/arch-kirkwood/spi.h @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar prafulla@marvell.com + * + * Derived from drivers/spi/mpc8xxx_spi.c + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef __KW_SPI_H__ +#define __KW_SPI_H__ + +/* SPI Registers on kirkwood SOC */ +struct kwspi_registers { + u32 ctrl; /* 0x10600 */ + u32 cfg; /* 0x10604 */ + u32 dout; /* 0x10608 */ + u32 din; /* 0x1060c */ + u32 irq_cause; /* 0x10610 */ + u32 irq_mask; /* 0x10614 */ +}; + +#define KWSPI_CLKPRESCL_MASK 0x1f +#define KWSPI_CSN_ACT 1 /* Activates serial memory interface */ +#define KWSPI_SMEMRDY (1 << 1) /* SerMem Data xfer ready */ +#define KWSPI_IRQUNMASK 1 /* unmask SPI interrupt */ +#define KWSPI_IRQMASK 0 /* mask SPI interrupt */ +#define KWSPI_SMEMRDIRQ 1 /* SerMem data xfer ready irq */ +#define KWSPI_XFERLEN_1BYTE 0 +#define KWSPI_XFERLEN_2BYTE (1 << 5) +#define KWSPI_XFERLEN_MASK (1 << 5) +#define KWSPI_ADRLEN_1BYTE 0 +#define KWSPI_ADRLEN_2BYTE 1 << 8 +#define KWSPI_ADRLEN_3BYTE 2 << 8 +#define KWSPI_ADRLEN_4BYTE 3 << 8 +#define KWSPI_ADRLEN_MASK 3 << 8 +#define KWSPI_TIMEOUT 10000 + +#endif /* __KW_SPI_H__ */