Signed-off-by: Joe Hershberger joe.hershberger@ni.com Cc: Joe Hershberger joe.hershberger@gmail.com Cc: Kim Phillips kim.phillips@freescale.com --- include/configs/ve8313.h | 204 ++++++++++++++++++++++++--------------------- 1 files changed, 109 insertions(+), 95 deletions(-)
diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index abb57fe..9035383 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -70,7 +70,7 @@ /* * DDR Setup */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
@@ -78,59 +78,60 @@ * Manually set up DDR parameters, as this board does not * have the SPD connected to I2C. */ -#define CONFIG_SYS_DDR_SIZE 128 /* MB */ -#define CONFIG_SYS_DDR_CONFIG ( CSCONFIG_EN \ +#define CONFIG_SYS_DDR_SIZE 128 /* MB */ +#define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN \ | CSCONFIG_AP \ | 0x00040000 /* TODO */ \ - | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 ) + | CSCONFIG_ROW_BIT_13 \ + | CSCONFIG_COL_BIT_10) /* 0x80840102 */
#define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \ - | ( 0 << TIMING_CFG0_WRT_SHIFT ) \ - | ( 3 << TIMING_CFG0_RRT_SHIFT ) \ - | ( 2 << TIMING_CFG0_WWT_SHIFT ) \ - | ( 7 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \ - | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \ - | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \ - | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) ) +#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \ + | (0 << TIMING_CFG0_WRT_SHIFT) \ + | (3 << TIMING_CFG0_RRT_SHIFT) \ + | (2 << TIMING_CFG0_WWT_SHIFT) \ + | (7 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \ + | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \ + | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \ + | (2 << TIMING_CFG0_MRS_CYC_SHIFT)) /* 0x0e720802 */ -#define CONFIG_SYS_DDR_TIMING_1 ( ( 2 << TIMING_CFG1_PRETOACT_SHIFT ) \ - | ( 6 << TIMING_CFG1_ACTTOPRE_SHIFT ) \ - | ( 2 << TIMING_CFG1_ACTTORW_SHIFT ) \ - | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \ - | ( 6 << TIMING_CFG1_REFREC_SHIFT ) \ - | ( 2 << TIMING_CFG1_WRREC_SHIFT ) \ - | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \ - | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) ) +#define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \ + | (6 << TIMING_CFG1_ACTTOPRE_SHIFT) \ + | (2 << TIMING_CFG1_ACTTORW_SHIFT) \ + | (5 << TIMING_CFG1_CASLAT_SHIFT) \ + | (6 << TIMING_CFG1_REFREC_SHIFT) \ + | (2 << TIMING_CFG1_WRREC_SHIFT) \ + | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \ + | (2 << TIMING_CFG1_WRTORD_SHIFT)) /* 0x26256222 */ -#define CONFIG_SYS_DDR_TIMING_2 ( ( 0 << TIMING_CFG2_ADD_LAT_SHIFT ) \ - | ( 5 << TIMING_CFG2_CPO_SHIFT ) \ - | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \ - | ( 1 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \ - | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \ - | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \ - | ( 7 << TIMING_CFG2_FOUR_ACT_SHIFT) ) +#define CONFIG_SYS_DDR_TIMING_2 ((0 << TIMING_CFG2_ADD_LAT_SHIFT) \ + | (5 << TIMING_CFG2_CPO_SHIFT) \ + | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \ + | (1 << TIMING_CFG2_RD_TO_PRE_SHIFT) \ + | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \ + | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \ + | (7 << TIMING_CFG2_FOUR_ACT_SHIFT)) /* 0x029028c7 */ -#define CONFIG_SYS_DDR_INTERVAL ( ( 0x320 << SDRAM_INTERVAL_REFINT_SHIFT ) \ - | ( 0x2000 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) ) +#define CONFIG_SYS_DDR_INTERVAL ((0x320 << SDRAM_INTERVAL_REFINT_SHIFT) \ + | (0x2000 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) /* 0x03202000 */ -#define CONFIG_SYS_SDRAM_CFG ( SDRAM_CFG_SREN \ +#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \ | SDRAM_CFG_SDRAM_TYPE_DDR2 \ - | SDRAM_CFG_32_BE ) + | SDRAM_CFG_32_BE) /* 0x43080000 */ -#define CONFIG_SYS_SDRAM_CFG2 0x00401000 -#define CONFIG_SYS_DDR_MODE ( ( 0x4440 << SDRAM_MODE_ESD_SHIFT ) \ - | ( 0x0232 << SDRAM_MODE_SD_SHIFT ) ) +#define CONFIG_SYS_SDRAM_CFG2 0x00401000 +#define CONFIG_SYS_DDR_MODE ((0x4440 << SDRAM_MODE_ESD_SHIFT) \ + | (0x0232 << SDRAM_MODE_SD_SHIFT)) /* 0x44400232 */ -#define CONFIG_SYS_DDR_MODE_2 0x8000C000 +#define CONFIG_SYS_DDR_MODE_2 0x8000C000
#define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 /*0x02000000*/ -#define CONFIG_SYS_DDRCDR_VALUE ( DDRCDR_EN \ +#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ | DDRCDR_PZ_NOMZ \ | DDRCDR_NZ_NOMZ \ - | DDRCDR_M_ODR ) + | DDRCDR_M_ODR) /* 0x73000002 */
/* @@ -143,16 +144,16 @@ #define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */
-#define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE | \ - (2 << BR_PS_SHIFT) | /* 16 bit */ \ - BR_V) /* valid */ +#define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE \ + | (2 << BR_PS_SHIFT) /* 16 bit */ \ + | BR_V) /* valid */ #define CONFIG_SYS_NOR_OR_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV4 \ - | OR_GPCM_SCY_5 \ - | OR_GPCM_TRLX \ - | OR_GPCM_EAD) - /* 0xfe000c55 */ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV4 \ + | OR_GPCM_SCY_5 \ + | OR_GPCM_TRLX \ + | OR_GPCM_EAD) + /* 0xfe000c55 */
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000018 /* 32 MB window size */ @@ -171,10 +172,10 @@
#define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ @@ -201,19 +202,19 @@ #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
-#define CONFIG_SYS_NAND_BR_PRELIM ( CONFIG_SYS_NAND_BASE \ - | BR_PS_8 \ - | BR_DECC_CHK_GEN \ - | BR_MS_FCM \ - | BR_V ) /* valid */ - /* 0x61000c21 */ +#define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \ + | BR_PS_8 \ + | BR_DECC_CHK_GEN \ + | BR_MS_FCM \ + | BR_V) /* valid */ + /* 0x61000c21 */ #define CONFIG_SYS_NAND_OR_PRELIM (0xffff8000 \ - | OR_FCM_BCTLD \ - | OR_FCM_CHT \ - | OR_FCM_SCY_2 \ - | OR_FCM_RST \ - | OR_FCM_TRLX) - /* 0xffff90ac */ + | OR_FCM_BCTLD \ + | OR_FCM_CHT \ + | OR_FCM_SCY_2 \ + | OR_FCM_RST \ + | OR_FCM_TRLX) + /* 0xffff90ac */
#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM @@ -227,27 +228,27 @@ #define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
/* CS2 NvRAM */ -#define CONFIG_SYS_BR2_PRELIM (0x60000000 \ - | BR_PS_8 \ +#define CONFIG_SYS_BR2_PRELIM (0x60000000 \ + | BR_PS_8 \ | BR_V) /* 0x60000801 */ -#define CONFIG_SYS_OR2_PRELIM (0xfffe0000 \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ +#define CONFIG_SYS_OR2_PRELIM (0xfffe0000 \ + | OR_GPCM_CSNT \ + | OR_GPCM_XACS \ | OR_GPCM_SCY_3 \ | OR_GPCM_TRLX \ | OR_GPCM_EHTR \ | OR_GPCM_EAD) /* 0xfffe0937 */ /* local bus read write buffer mapping SRAM@0x64000000 */ -#define CONFIG_SYS_BR3_PRELIM (0x62000000 \ - | BR_PS_16 \ +#define CONFIG_SYS_BR3_PRELIM (0x62000000 \ + | BR_PS_16 \ | BR_V) /* 0x62001001 */
-#define CONFIG_SYS_OR3_PRELIM (0xfe000000 \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ +#define CONFIG_SYS_OR3_PRELIM (0xfe000000 \ + | OR_GPCM_CSNT \ + | OR_GPCM_XACS \ | OR_GPCM_SCY_15 \ | OR_GPCM_TRLX \ | OR_GPCM_EHTR \ @@ -289,9 +290,9 @@ #define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 #define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE #define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 -#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ +#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 +#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
#define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ @@ -321,13 +322,13 @@ * Environment */ #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ - CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_ADDR \ + (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ #define CONFIG_ENV_SIZE 0x4000 /* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_OFFSET_REDUND \ + (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ @@ -372,7 +373,8 @@ * have to be in the first 256 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux*/ + /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
/* 0x64050000 */ #define CONFIG_SYS_HRCW_LOW (\ @@ -422,18 +424,26 @@
/* DDR @ 0x00000000 */ #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \ - BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ + | BATU_BL_256M \ + | BATU_VS \ + | BATU_VP)
#if defined(CONFIG_PCI) /* PCI @ 0x80000000 */ #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | \ - BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \ + | BATU_BL_256M \ + | BATU_VS \ + | BATU_VP) +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \ + | BATL_PP_10 \ + | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \ + | BATU_BL_256M \ + | BATU_VS \ + | BATU_VP) #else #define CONFIG_SYS_IBAT1L (0) #define CONFIG_SYS_IBAT1U (0) @@ -448,10 +458,14 @@ #define CONFIG_SYS_IBAT4U (0)
/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR | BATL_PP_10 | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | \ - BATU_VP) +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ + | BATL_PP_10 \ + | BATL_CACHEINHIBIT \ + | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ + | BATU_BL_256M \ + | BATU_VS \ + | BATU_VP)
/* stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ #define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_GUARDEDSTORAGE) @@ -496,10 +510,10 @@ "u-boot_addr_r=100000\0" \ "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ "update=protect off " MK_STR(CONFIG_SYS_FLASH_BASE) " +${filesize};" \ - "erase " MK_STR(CONFIG_SYS_FLASH_BASE) " +${filesize};" \ - "cp.b ${u-boot_addr_r} " MK_STR(CONFIG_SYS_FLASH_BASE) \ - " ${filesize};" \ - "protect on " MK_STR(CONFIG_SYS_FLASH_BASE) " +${filesize}\0" \ + "erase " MK_STR(CONFIG_SYS_FLASH_BASE) " +${filesize};" \ + "cp.b ${u-boot_addr_r} " MK_STR(CONFIG_SYS_FLASH_BASE) \ + " ${filesize};" \ + "protect on " MK_STR(CONFIG_SYS_FLASH_BASE) " +${filesize}\0" \
#undef MK_STR #undef XMK_STR