Hi Waldemar
On 9/20/22 01:12, Waldemar Brodkorb wrote:
Hi Simon, Simon Glass wrote,
Hi Waldemar,
On Mon, 19 Sept 2022 at 13:48, Waldemar Brodkorb wbx@openadk.org wrote:
Hi again,
Waldemar Brodkorb wrote,
Hi,
I am trying to run u-boot on a STM32F746G-DISCO device. I am configuring u-boot with stm32f746-disco_spl_defconfig.
But nothing happens on the LCD nor on the serial console. I use screen /dev/ttyACM0 115200 under Linux to connect.
It seems my USB port on my laptop was buggy, after reboot I get following output via serial console:
U-Boot SPL 2022.07 (Sep 19 2022 - 13:20:08 +0200) Trying to boot from XIP
U-Boot 2022.07 (Sep 19 2022 - 13:20:08 +0200)
Model: STMicroelectronics STM32F746-DISCO board DRAM: 8 MiB Hard fault pc : 080087d6 lr : c05aa775 xPSR : a1000000 r12 : 00000010 r3 : 080087c1 r2 : 0805344d r1 : 08008001 r0 : c05aa000 Resetting CPU ...
resetting ...
I get a Hard fault. I then tried an older version of u-boot using the information from https://github.com/fdu/STM32F746G-disco_Buildroot as a hint. With U-Boot 2018.11 I get a working binary (I had to disable Falcon mode):
U-Boot SPL 2018.11 (Sep 19 2022 - 13:41:50 +0200) Trying to boot from XIP
U-Boot 2018.11 (Sep 19 2022 - 13:41:50 +0200)
Model: STMicroelectronics STM32F746-DISCO board DRAM: 8 MiB Flash: 1 MiB MMC: sdio@40012c00: 0 In: serial Out: serial Err: serial usr button is at LOW LEVEL Net: Warning: ethernet@40028000 (eth0) using random MAC address - fe:f8:94:5f:5e:26 eth0: ethernet@40028000 Hit SPACE in 3 seconds to stop autoboot. Wrong Image Format for bootm command ERROR: can't get kernel image! U-Boot >
Seems like a regression to me.
Yes, can you use git bisect to find it?
cd82f199852d88218e1f17f5ec07cdd9112a89c4 is the first bad commit.
I remember i encountered an issue with patch in the past and by updating my toolchain everything goes fine.
Which toolchain version do you use ?
On my side i am using this one : https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/11.1.0/x86_64-gc...
Patrice
When I revert this commit on master I get: U-Boot SPL 2022.10-rc5-00001-gdbcc7add19-dirty (Sep 20 2022 - 00:59:21 +0200) Trying to boot from XIP
U-Boot 2022.10-rc5-00001-gdbcc7add19-dirty (Sep 20 2022 - 00:59:21 +0200)
Model: STMicroelectronics STM32F746-DISCO board DRAM: 8 MiB stm32fx_rcc_clock rcc@40023800: set_rate not implemented for clock index 4 stm32fx_rcc_clock rcc@40023800: set_rate not implemented for clock index 4 stm32fx_rcc_clock rcc@40023800: set_rate not implemented for clock index 4 Core: 38 devices, 22 uclasses, devicetree: separate Flash: 1 MiB MMC: sdio1@40012c00: 0 Loading Environment from nowhere... OK In: serial Out: serial Err: serial usr button is at LOW LEVEL Net: Warning: ethernet@40028000 (eth0) using random MAC address - 7e:cf:cf:fc:30:4a eth0: ethernet@40028000 Hit SPACE in 3 seconds to stop autoboot. MMC: no card present
looks good without the problematic commit.
best regards Waldemar