On 08/09/2015 19:43, Fabio Estevam wrote:
It is not very useful to have the message below on every boot (especially when we are using early silicon):
U-Boot 2015.10-rc2-23945-g37cf215 (Sep 08 2015 - 14:12:14 -0300)
CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C)CPU: Thermal invalid data, fuse: 0x0
- invalid sensor device
, so turn the error message into debug level.
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com
drivers/thermal/imx_thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index 3c6c967..04c43d7 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -159,7 +159,7 @@ static int imx_thermal_probe(struct udevice *dev)
/* Check for valid fuse */ if (fuse == 0 || fuse == ~0) {
printf("CPU: Thermal invalid data, fuse: 0x%x\n", fuse);
debug("CPU: Thermal invalid data, fuse: 0x%x\n", fuse);
Applied to u-boot-imx, thanks !
Best regards, Stefano Babic