Re: [U-Boot] "go" does not work for uImage - was: ## Application terminated, rc = 0x1

Dear ba_f,

In message 2e2178cf246f80c4f9098dce357e5528@rbg.informatik.tu-darmstadt.de you wrote:

Another issue:

So, here we go in a new thread.

I tried to execute the same Uimage on another platform. The platform has the same processor but another U-Boot. On this platform i fail to execute with my common way:

uboot> fatload mmc 0 0x00ffffc0 bootstrap.uimage uboot> go 0x01000000 ## Starting application at 0x01000000 ... undefined instruction pc : [<010000f4>] lr : [<3ff74bc0>]

Your other platform might use a different memory map...

After running the "fatload" as above, type

iminfo ffffc0

and it will show you which load and entry point addresses shuld be used.

Best regards,

Wolfgang Denk