Jocke,
[snip]
still -E_TOO_LITTLE_INFO:
sorry - thought it was clear already.
"include weather booted from NAND or NOR, CPU type(e300cX) and what reset vector is used."
CPU: e300c4, MPC8379, Rev: 2.1 at 600 MHz, CSB: 400 MHz
- Boot from NOR Flash - HRCW from I2C EEPROM - Reset Vector 0x100, i.e. low boot.
Initial RAM ...
#define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 #define CONFIG_SYS_GBL_DATA_SIZE 0x100 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
... mapped by BAT5
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10) #define CONFIG_SYS_IBAT5U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
Of course ELDK-4.2 toolchain.
My latest MPC8377 board does not even start without your suggested 4 nops. It does not start (i.e. serial line completely dead) with any USB functionality defined.
Something else is broken here, no idea what.
If it's an alignment or linking problem it could have the same root cause. Just want to give as much information as I can.
Cheers, André
MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler Registergericht: Amtsgericht Stuttgart, HRB 271090 Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner