[U-Boot] [PATCH V11 09/13] OMAP3: SPL: do not call I2C init if no I2C is set.

Call i2c initialization in spl_board_init only if I2C is configured for the board.

Signed-off-by: Stefano Babic sbabic@denx.de CC: Tom Rini tom.rini@gmail.com CC: Wolfgang Denk wd@denx.de CC: Simon Schwarz simonschwarzcor@gmail.com --- arch/arm/cpu/armv7/omap3/board.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index 1f33c63..889d650 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -92,7 +92,9 @@ u32 omap_boot_device(void)

void spl_board_init(void) { +#ifdef CONFIG_HARD_I2C i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif } #endif /* CONFIG_SPL_BUILD */