[U-Boot] [PATCH 3/4 v3] arm: mvebu: armada-xp/37x.dtsi: Sync PCIe DT nodes with Linux v4.20

25 Jan 2019

This patch sync's the PCIe DT nodes with the recent Linux v4.20 version.
This change makes it easier to reference specific PCIe nodes in the
board dts files to e.g. enable a PCIe port as this is now necessary with
the new DM PCI driver for these platforms.
Signed-off-by: Stefan Roese sr@denx.de
Cc: Dirk Eibach dirk.eibach@gdsys.cc
Cc: Mario Six mario.six@gdsys.cc
Cc: Chris Packham chris.packham@alliedtelesis.co.nz
Cc: Phil Sutter phil@nwl.cc
Cc: Marek Behún marek.behun@nic.cz
Cc: VlaoMao vlaomao@gmail.com
Cc: Tom Rini trini@konsulko.com
---
v3:
- No change
v2:
- New file
arch/arm/dts/armada-375.dtsi        |  8 +++++---
 arch/arm/dts/armada-xp-mv78230.dtsi | 17 +++++++++------
 arch/arm/dts/armada-xp-mv78260.dtsi | 29 +++++++++++++++++---------
 arch/arm/dts/armada-xp-mv78460.dtsi | 32 +++++++++++++++++++----------
 4 files changed, 56 insertions(+), 30 deletions(-)

diff --git a/arch/arm/dts/armada-375.dtsi b/arch/arm/dts/armada-375.dtsi
index 249c41c757..62a548a55f 100644
--- a/arch/arm/dts/armada-375.dtsi
+++ b/arch/arm/dts/armada-375.dtsi
@@ -582,7 +582,7 @@
    		};
    	};
-		pcie-controller {
+		pciec: pcie@82000000 {
    		compatible = "marvell,armada-370-pcie";
    		status = "disabled";
    		device_type = "pci";
@@ -601,7 +601,7 @@
    			0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
    			0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO  */>;
-			pcie@1,0 {
+			pcie0: pcie@1,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
    			reg = <0x0800 0 0 0 0>;
@@ -610,6 +610,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
    				  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
    			marvell,pcie-port = <0>;
@@ -618,7 +619,7 @@
    			status = "disabled";
    		};
-			pcie@2,0 {
+			pcie1: pcie@2,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
    			reg = <0x1000 0 0 0 0>;
@@ -627,6 +628,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
    				  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
    			marvell,pcie-port = <0>;
diff --git a/arch/arm/dts/armada-xp-mv78230.dtsi b/arch/arm/dts/armada-xp-mv78230.dtsi
index 6e6d0f04bf..f6bab9fb20 100644
--- a/arch/arm/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/dts/armada-xp-mv78230.dtsi
@@ -86,7 +86,7 @@
    	 * configured as x4 or quad x1 lanes. One unit is
    	 * x1 only.
    	 */
-		pcie-controller {
+		pciec: pcie@82000000 {
    		compatible = "marvell,armada-xp-pcie";
    		status = "disabled";
    		device_type = "pci";
@@ -114,7 +114,7 @@
    			0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
    			0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
    			reg = <0x0800 0 0 0 0>;
@@ -123,6 +123,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
    				  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 58>;
    			marvell,pcie-port = <0>;
@@ -131,7 +132,7 @@
    			status = "disabled";
    		};
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
    			reg = <0x1000 0 0 0 0>;
@@ -140,6 +141,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
    				  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 59>;
    			marvell,pcie-port = <0>;
@@ -148,7 +150,7 @@
    			status = "disabled";
    		};
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
    			reg = <0x1800 0 0 0 0>;
@@ -157,6 +159,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
    				  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 60>;
    			marvell,pcie-port = <0>;
@@ -165,7 +168,7 @@
    			status = "disabled";
    		};
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
    			reg = <0x2000 0 0 0 0>;
@@ -174,6 +177,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
    				  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 61>;
    			marvell,pcie-port = <0>;
@@ -182,7 +186,7 @@
    			status = "disabled";
    		};
-			pcie@5,0 {
+			pcie5: pcie@5,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
    			reg = <0x2800 0 0 0 0>;
@@ -191,6 +195,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
    				  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 62>;
    			marvell,pcie-port = <1>;
diff --git a/arch/arm/dts/armada-xp-mv78260.dtsi b/arch/arm/dts/armada-xp-mv78260.dtsi
index c5fdc99f0d..d39231f69d 100644
--- a/arch/arm/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/dts/armada-xp-mv78260.dtsi
@@ -87,7 +87,7 @@
    	 * configured as x4 or quad x1 lanes. One unit is
    	 * x4 only.
    	 */
-		pcie-controller {
+		pciec: pcie@82000000 {
    		compatible = "marvell,armada-xp-pcie";
    		status = "disabled";
    		device_type = "pci";
@@ -129,7 +129,7 @@
    			0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
    			0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
    			reg = <0x0800 0 0 0 0>;
@@ -138,6 +138,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
    				  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 58>;
    			marvell,pcie-port = <0>;
@@ -146,7 +147,7 @@
    			status = "disabled";
    		};
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
    			reg = <0x1000 0 0 0 0>;
@@ -155,6 +156,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
    				  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 59>;
    			marvell,pcie-port = <0>;
@@ -163,7 +165,7 @@
    			status = "disabled";
    		};
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
    			reg = <0x1800 0 0 0 0>;
@@ -172,6 +174,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
    				  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 60>;
    			marvell,pcie-port = <0>;
@@ -180,7 +183,7 @@
    			status = "disabled";
    		};
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
    			reg = <0x2000 0 0 0 0>;
@@ -189,6 +192,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
    				  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 61>;
    			marvell,pcie-port = <0>;
@@ -197,7 +201,7 @@
    			status = "disabled";
    		};
-			pcie@5,0 {
+			pcie5: pcie@5,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
    			reg = <0x2800 0 0 0 0>;
@@ -206,6 +210,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
    				  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 62>;
    			marvell,pcie-port = <1>;
@@ -214,7 +219,7 @@
    			status = "disabled";
    		};
-			pcie@6,0 {
+			pcie6: pcie@6,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
    			reg = <0x3000 0 0 0 0>;
@@ -223,6 +228,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
    				  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 63>;
    			marvell,pcie-port = <1>;
@@ -231,7 +237,7 @@
    			status = "disabled";
    		};
-			pcie@7,0 {
+			pcie7: pcie@7,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
    			reg = <0x3800 0 0 0 0>;
@@ -240,6 +246,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
    				  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 64>;
    			marvell,pcie-port = <1>;
@@ -248,7 +255,7 @@
    			status = "disabled";
    		};
-			pcie@8,0 {
+			pcie8: pcie@8,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
    			reg = <0x4000 0 0 0 0>;
@@ -257,6 +264,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
    				  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 65>;
    			marvell,pcie-port = <1>;
@@ -265,7 +273,7 @@
    			status = "disabled";
    		};
-			pcie@9,0 {
+			pcie9: pcie@9,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
    			reg = <0x4800 0 0 0 0>;
@@ -274,6 +282,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
    				  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 99>;
    			marvell,pcie-port = <2>;
diff --git a/arch/arm/dts/armada-xp-mv78460.dtsi b/arch/arm/dts/armada-xp-mv78460.dtsi
index 0e24f1a385..c642565d1b 100644
--- a/arch/arm/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/dts/armada-xp-mv78460.dtsi
@@ -104,7 +104,7 @@
    	 * configured as x4 or quad x1 lanes. Two units are
    	 * x4/x1.
    	 */
-		pcie-controller {
+		pciec: pcie@82000000 {
    		compatible = "marvell,armada-xp-pcie";
    		status = "disabled";
    		device_type = "pci";
@@ -150,7 +150,7 @@
    			0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
    			0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
    			reg = <0x0800 0 0 0 0>;
@@ -159,6 +159,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
    				  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 58>;
    			marvell,pcie-port = <0>;
@@ -167,7 +168,7 @@
    			status = "disabled";
    		};
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
    			reg = <0x1000 0 0 0 0>;
@@ -176,6 +177,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
    				  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 59>;
    			marvell,pcie-port = <0>;
@@ -184,7 +186,7 @@
    			status = "disabled";
    		};
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
    			reg = <0x1800 0 0 0 0>;
@@ -193,6 +195,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
    				  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 60>;
    			marvell,pcie-port = <0>;
@@ -201,7 +204,7 @@
    			status = "disabled";
    		};
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
    			reg = <0x2000 0 0 0 0>;
@@ -210,6 +213,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
    				  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 61>;
    			marvell,pcie-port = <0>;
@@ -218,7 +222,7 @@
    			status = "disabled";
    		};
-			pcie@5,0 {
+			pcie5: pcie@5,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
    			reg = <0x2800 0 0 0 0>;
@@ -227,6 +231,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
    				  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 62>;
    			marvell,pcie-port = <1>;
@@ -235,7 +240,7 @@
    			status = "disabled";
    		};
-			pcie@6,0 {
+			pcie6: pcie@6,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
    			reg = <0x3000 0 0 0 0>;
@@ -244,6 +249,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
    				  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 63>;
    			marvell,pcie-port = <1>;
@@ -252,7 +258,7 @@
    			status = "disabled";
    		};
-			pcie@7,0 {
+			pcie7: pcie@7,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
    			reg = <0x3800 0 0 0 0>;
@@ -261,6 +267,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
    				  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 64>;
    			marvell,pcie-port = <1>;
@@ -269,7 +276,7 @@
    			status = "disabled";
    		};
-			pcie@8,0 {
+			pcie8: pcie@8,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
    			reg = <0x4000 0 0 0 0>;
@@ -278,6 +285,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
    				  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 65>;
    			marvell,pcie-port = <1>;
@@ -286,7 +294,7 @@
    			status = "disabled";
    		};
-			pcie@9,0 {
+			pcie9: pcie@9,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
    			reg = <0x4800 0 0 0 0>;
@@ -295,6 +303,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
    				  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 99>;
    			marvell,pcie-port = <2>;
@@ -303,7 +312,7 @@
    			status = "disabled";
    		};
-			pcie@10,0 {
+			pcie10: pcie@a,0 {
    			device_type = "pci";
    			assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
    			reg = <0x5000 0 0 0 0>;
@@ -312,6 +321,7 @@
    			#interrupt-cells = <1>;
    			ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
    				  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				bus-range = <0x00 0xff>;
    			interrupt-map-mask = <0 0 0 0>;
    			interrupt-map = <0 0 0 0 &mpic 103>;
    			marvell,pcie-port = <3>;
-- 
2.20.1


    