Fastest read command code look for fastest read command taking inputs from spi->mode_rx and flags from param table and controller mode_rx is always been a priority.
Since mode_rx is always set from controller side this optimized code doesn't require much and this code required exctra overhead like 1) Maintain e_rx_cmd in param table 2) Maintain mode_rx in spi_slave {}
Hence removed this code, and look for read command from normal spi->mode from spi_slave{} and params->flags
Cc: Simon Glass sjg@chromium.org Cc: Bin Meng bmeng.cn@gmail.com Cc: Michal Simek michal.simek@xilinx.com Cc: Siva Durga Prasad Paladugu sivadur@xilinx.com Cc: Vignesh R vigneshr@ti.com Cc: Mugunthan V N mugunthanvnm@ti.com Signed-off-by: Jagan Teki jteki@openedev.com --- drivers/mtd/spi/sf_internal.h | 4 ++++ drivers/mtd/spi/spi_flash.c | 28 ++++++++++------------------ 2 files changed, 14 insertions(+), 18 deletions(-)
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index da2bb7b..c5cb791 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -46,6 +46,10 @@ enum { E_FSR = BIT(2), SST_WR = BIT(3), WR_QPP = BIT(4), + RD_QUAD = BIT(5), + RD_DUAL = BIT(6), + RD_QUADIO = BIT(7), + RD_DUALIO = BIT(8), };
enum spi_nor_option_flags { diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 64d4e0f..5fd408c 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -1013,15 +1013,8 @@ int spi_flash_scan(struct spi_flash *flash) struct spi_slave *spi = flash->spi; const struct spi_flash_params *params; u16 jedec, ext_jedec; - u8 cmd, idcode[5]; + u8 idcode[5]; int ret; - static u8 spi_read_cmds_array[] = { - CMD_READ_ARRAY_SLOW, - CMD_READ_ARRAY_FAST, - CMD_READ_DUAL_OUTPUT_FAST, - CMD_READ_QUAD_OUTPUT_FAST, - CMD_READ_DUAL_IO_FAST, - CMD_READ_QUAD_IO_FAST };
/* Read the ID codes */ ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode)); @@ -1177,17 +1170,16 @@ int spi_flash_scan(struct spi_flash *flash) /* Now erase size becomes valid sector size */ flash->sector_size = flash->erase_size;
- /* Look for the fastest read cmd */ - cmd = fls(params->e_rd_cmd & spi->mode_rx); - if (cmd) { - cmd = spi_read_cmds_array[cmd - 1]; - flash->read_cmd = cmd; - } else { - /* Go for default supported read cmd */ - flash->read_cmd = CMD_READ_ARRAY_FAST; - } + /* Look for read commands */ + flash->read_cmd = CMD_READ_ARRAY_FAST; + if (spi->mode_rx & SPI_RX_SLOW) + flash->read_cmd = CMD_READ_ARRAY_SLOW; + else if (spi->mode_rx & SPI_RX_QUAD && params->flags & RD_QUAD) + flash->read_cmd = CMD_READ_QUAD_OUTPUT_FAST; + else if (spi->mode_rx & SPI_RX_DUAL && params->flags & RD_DUAL) + flash->read_cmd = CMD_READ_DUAL_OUTPUT_FAST;
- /* Not require to look for fastest only two write cmds yet */ + /* Look for write commands */ if (params->flags & WR_QPP && spi->mode & SPI_TX_QUAD) flash->write_cmd = CMD_QUAD_PAGE_PROGRAM; else